/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 5.18.0-rc2 (pmos@Mis012) (aarch64-alpine-linux-musl-gcc (Alpine 11.2.1_git20220106) 11.2.1 20220106, GNU ld (GNU Binutils) 2.37) #383 SMP PREEMPT Thu Apr 21 09:13:06 UTC 2022 [ 0.000000] Machine model: F(x)tec Pro1 (QX1000) [ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x000000000c1b0000 (options '115200n8') [ 0.000000] printk: bootconsole [msm_serial_dm0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000f6400000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node memory@f6400000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000857fffff] [ 0.000000] node 0: [mem 0x0000000085800000-0x0000000085efffff] [ 0.000000] node 0: [mem 0x0000000085f00000-0x0000000085ffffff] [ 0.000000] node 0: [mem 0x0000000086000000-0x00000000890fffff] [ 0.000000] node 0: [mem 0x0000000089100000-0x000000008aafffff] [ 0.000000] node 0: [mem 0x000000008ab00000-0x0000000095214fff] [ 0.000000] node 0: [mem 0x0000000095215000-0x00000000955fffff] [ 0.000000] node 0: [mem 0x0000000095600000-0x00000000957fffff] [ 0.000000] node 0: [mem 0x0000000095800000-0x000000009d3fffff] [ 0.000000] node 0: [mem 0x000000009d400000-0x000000009f3fffff] [ 0.000000] node 0: [mem 0x000000009f400000-0x00000000f63fffff] [ 0.000000] node 0: [mem 0x00000000f6400000-0x00000000f6401fff] [ 0.000000] node 0: [mem 0x00000000f6402000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fa800000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] percpu: Embedded 19 pages/cpu s37160 r8192 d32472 u77824 [ 0.000000] pcpu-alloc: s37160 r8192 d32472 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 774144 [ 0.000000] Kernel command line: earlycon console=ttyMSM0,115200 msm.rd_full=1 clk_ignore_unused dyndbg="file drivers/clk/* +p" maxcpus=1 PMOS_NO_OUTPUT_REDIRECT [ 0.000000] Unknown kernel command line parameters "PMOS_NO_OUTPUT_REDIRECT", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2756688K/3145728K available (13888K kernel code, 2264K rwdata, 7404K rodata, 4288K init, 589K bss, 356272K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: 608 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017b00000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] random: get_random_bytes called from start_kernel+0x700/0x874 with crng_init=0 [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.010890] Console: colour dummy device 80x25 [ 0.018749] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.023268] pid_max: default: 32768 minimum: 301 [ 0.033639] LSM: Security Framework initializing [ 0.038365] SELinux: Initializing. [ 0.043039] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.046184] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.055034] cblist_init_generic: Setting adjustable number of callback queues. [ 0.061554] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.068695] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.074925] rcu: Hierarchical SRCU implementation. [ 0.082813] EFI services will not be available. [ 0.085877] smp: Bringing up secondary CPUs ... [ 0.089995] smp: Brought up 1 node, 1 CPU [ 0.094508] SMP: Total of 1 processors activated. [ 0.098693] CPU features: detected: 32-bit EL0 Support [ 0.103368] CPU features: detected: CRC32 instructions [ 0.108755] CPU: All CPU(s) started at EL1 [ 0.113524] alternatives: patching kernel code [ 0.118658] devtmpfs: initialized [ 0.129031] KASLR disabled due to lack of seed [ 0.129244] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.132426] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.143102] pinctrl core: initialized pinctrl subsystem [ 0.149296] regulator-dummy: no parameters, enabled [ 0.149505] DMI not present or invalid. [ 0.154576] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.159031] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.164125] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.171469] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.179021] audit: initializing netlink subsys (disabled) [ 0.187168] thermal_sys: Registered thermal governor 'step_wise' [ 0.188624] cpuidle: using governor menu [ 0.198274] audit: type=2000 audit(0.150:1): state=initialized audit_enabled=0 res=1 [ 0.202276] NET: Registered PF_QIPCRTR protocol family [ 0.210001] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.214863] ASID allocator initialised with 65536 entries [ 0.230525] printk: console [ramoops-1] enabled [ 0.230723] pstore: Registered ramoops as persistent store backend [ 0.233968] ramoops: using 0x100000@0xffc00000, ecc: 16 [ 0.248569] Added clk_hw provider from /soc/clock-controller@100000 [ 0.250602] platform 1da7000.phy: Fixing up cyclic dependency with 1da4000.ufshc [ 0.265352] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.265461] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.271234] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.277952] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.284990] cryptd: max_cpu_qlen set to 1000 [ 0.292059] vph_pwr: no parameters, enabled [ 0.292157] reg-fixed-voltage vph-pwr-regulator: vph_pwr supplying 0uV [ 0.292338] ts_vio_reg: no parameters, enabled [ 0.292423] reg-fixed-voltage ts-vio-vreg: ts_vio_reg supplying 0uV [ 0.292710] iommu: Default domain type: Translated [ 0.295533] iommu: DMA domain TLB invalidation policy: strict mode [ 0.300307] SCSI subsystem initialized [ 0.306487] usbcore: registered new interface driver usbfs [ 0.310183] usbcore: registered new interface driver hub [ 0.315694] usbcore: registered new device driver usb [ 0.321215] mc: Linux media interface: v0.10 [ 0.326116] videodev: Linux video capture interface: v2.00 [ 0.330402] pps_core: LinuxPPS API ver. 1 registered [ 0.335686] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.340821] PTP clock support registered [ 0.350285] qcom_scm: convention: smc arm 64 [ 0.360671] s3: Bringing 0uV into 1352000-1352000uV [ 0.360773] s3: ramp_delay not set [ 0.360793] s3: 1352 mV, disabled [ 0.360903] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_s3-supply from device tree [ 0.361005] s3: supplied by vph_pwr [ 0.361068] s4: Bringing 0uV into 1800000-1800000uV [ 0.364462] s4: ramp_delay not set [ 0.364477] s4: 1800 mV, disabled [ 0.364572] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_s4-supply from device tree [ 0.364580] s4: supplied by vph_pwr [ 0.364635] s5: Bringing 0uV into 1904000-1904000uV [ 0.369277] s5: ramp_delay not set [ 0.369293] s5: 1904 <--> 2040 mV at 1904 mV, disabled [ 0.369379] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_s5-supply from device tree [ 0.369387] s5: supplied by vph_pwr [ 0.369449] s7: Bringing 0uV into 900000-900000uV [ 0.374416] Advanced Linux Sound Architecture Driver Initialized. [ 0.379352] Bluetooth: Core ver 2.22 [ 0.385155] NET: Registered PF_BLUETOOTH protocol family [ 0.388722] Bluetooth: HCI device and connection manager initialized [ 0.394072] Bluetooth: HCI socket layer initialized [ 0.400361] s7: ramp_delay not set [ 0.400378] s7: 900 <--> 1028 mV at 900 mV, disabled [ 0.400477] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_s7-supply from device tree [ 0.400486] s7: supplied by vph_pwr [ 0.400548] l1: Bringing 0uV into 880000-880000uV [ 0.404955] l1: ramp_delay not set [ 0.404966] l1: 880 mV, disabled [ 0.405053] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l1_l27-supply from device tree [ 0.405071] l1: supplied by s7 [ 0.405131] l2: Bringing 0uV into 1200000-1200000uV [ 0.409861] l2: ramp_delay not set [ 0.409871] l2: 1200 mV, disabled [ 0.409953] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l2_l8_l17-supply from device tree [ 0.409964] l2: supplied by s3 [ 0.410024] l3: Bringing 0uV into 1000000-1000000uV [ 0.414515] Bluetooth: L2CAP socket layer initialized [ 0.419419] Bluetooth: SCO socket layer initialized [ 0.424579] l3: ramp_delay not set [ 0.424590] l3: 1000 mV, disabled [ 0.424690] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l3_l11-supply from device tree [ 0.424700] l3: supplied by s7 [ 0.424764] l5: Bringing 0uV into 800000-800000uV [ 0.429305] l5: ramp_delay not set [ 0.429315] l5: 800 mV, disabled [ 0.429405] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l4_l5-supply from device tree [ 0.429415] l5: supplied by s7 [ 0.429480] l6: Bringing 0uV into 1808000-1808000uV [ 0.434120] l6: ramp_delay not set [ 0.434135] l6: 1808 mV, disabled [ 0.434221] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l6-supply from device tree [ 0.434231] l6: supplied by s5 [ 0.434313] l7: Bringing 0uV into 1800000-1800000uV [ 0.438958] nfc: nfc_init: NFC Core ver 0.1 [ 0.443748] NET: Registered PF_NFC protocol family [ 0.447837] mctp: management component transport protocol core [ 0.452758] l7: ramp_delay not set [ 0.452770] l7: 1800 mV, disabled [ 0.452854] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l7_l12_l14_l15-supply from device tree [ 0.452865] l7: supplied by s5 [ 0.452930] l8: Bringing 0uV into 1200000-1200000uV [ 0.458515] l8: ramp_delay not set [ 0.458525] l8: 1200 mV, disabled [ 0.458608] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l2_l8_l17-supply from device tree [ 0.458618] l8: supplied by s3 [ 0.458681] l9: Bringing 0uV into 1808000-1808000uV [ 0.463343] NET: Registered PF_MCTP protocol family [ 0.468217] l9: ramp_delay not set [ 0.468235] l9: 1808 <--> 2960 mV at 1808 mV, disabled [ 0.468322] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.468334] l9: unable to resolve supply [ 0.468376] l10: Bringing 0uV into 1808000-1808000uV [ 0.473011] l10: ramp_delay not set [ 0.473027] l10: 1808 <--> 2960 mV at 1808 mV, disabled [ 0.473130] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.473141] l9: unable to resolve supply [ 0.473147] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.473156] l10: unable to resolve supply [ 0.473194] l11: Bringing 0uV into 1000000-1000000uV [ 0.478239] vgaarb: loaded [ 0.483309] clocksource: Switched to clocksource arch_sys_counter [ 0.485890] VFS: Disk quotas dquot_6.6.0 [ 0.491863] l11: ramp_delay not set [ 0.491876] l11: 1000 mV, disabled [ 0.491962] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.491973] l9: unable to resolve supply [ 0.491978] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.491987] l10: unable to resolve supply [ 0.491992] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l3_l11-supply from device tree [ 0.492001] l11: supplied by s7 [ 0.492074] l12: Bringing 0uV into 1800000-1800000uV [ 0.495852] l12: ramp_delay not set [ 0.495864] l12: 1800 mV, disabled [ 0.495952] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.495963] l9: unable to resolve supply [ 0.495968] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.495978] l10: unable to resolve supply [ 0.495983] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l7_l12_l14_l15-supply from device tree [ 0.495992] l12: supplied by s5 [ 0.496086] l13: Bringing 0uV into 1808000-1808000uV [ 0.500836] l13: ramp_delay not set [ 0.500852] l13: 1808 <--> 2960 mV at 1808 mV, disabled [ 0.500941] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.500952] l9: unable to resolve supply [ 0.500957] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.500967] l10: unable to resolve supply [ 0.500973] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.500983] l13: unable to resolve supply [ 0.501025] l14: Bringing 0uV into 1880000-1880000uV [ 0.505775] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.515852] NET: Registered PF_INET protocol family [ 0.517513] l14: ramp_delay not set [ 0.517526] l14: 1880 mV, disabled [ 0.517624] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.517637] l9: unable to resolve supply [ 0.517642] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.517651] l10: unable to resolve supply [ 0.517657] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.517666] l13: unable to resolve supply [ 0.517672] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l7_l12_l14_l15-supply from device tree [ 0.517682] l14: supplied by s5 [ 0.517755] l15: Bringing 0uV into 1800000-1800000uV [ 0.522190] l15: ramp_delay not set [ 0.522200] l15: 1800 mV, disabled [ 0.522287] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.522299] l9: unable to resolve supply [ 0.522303] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.522314] l10: unable to resolve supply [ 0.522319] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.522328] l13: unable to resolve supply [ 0.522333] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l7_l12_l14_l15-supply from device tree [ 0.522341] l15: supplied by s5 [ 0.522409] l16: Bringing 0uV into 2704000-2704000uV [ 0.527462] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.533795] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.539769] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.548157] l16: ramp_delay not set [ 0.548174] l16: 2704 mV, disabled [ 0.548280] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.548293] l9: unable to resolve supply [ 0.548298] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.548308] l10: unable to resolve supply [ 0.548312] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.548323] l13: unable to resolve supply [ 0.548328] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.548337] l16: unable to resolve supply [ 0.548381] l17: Bringing 0uV into 1304000-1304000uV [ 0.555966] l17: ramp_delay not set [ 0.555977] l17: 1304 mV, disabled [ 0.556080] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.556092] l9: unable to resolve supply [ 0.556097] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.556107] l10: unable to resolve supply [ 0.556111] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.556121] l13: unable to resolve supply [ 0.556126] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.556136] l16: unable to resolve supply [ 0.556140] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l2_l8_l17-supply from device tree [ 0.556149] l17: supplied by s3 [ 0.556221] l18: Bringing 0uV into 2704000-2704000uV [ 0.561033] l18: ramp_delay not set [ 0.561048] l18: 2704 mV, disabled [ 0.561139] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.561151] l9: unable to resolve supply [ 0.561155] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.561166] l10: unable to resolve supply [ 0.561171] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.561181] l13: unable to resolve supply [ 0.561186] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.561197] l16: unable to resolve supply [ 0.561202] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.561213] l18: unable to resolve supply [ 0.561257] l19: Bringing 0uV into 3008000-3008000uV [ 0.566226] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.571283] TCP: Hash tables configured (established 32768 bind 32768) [ 0.578019] l19: ramp_delay not set [ 0.578035] l19: 3008 mV, disabled [ 0.578126] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.578138] l9: unable to resolve supply [ 0.578143] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.578153] l10: unable to resolve supply [ 0.578158] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.578169] l13: unable to resolve supply [ 0.578174] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.578185] l16: unable to resolve supply [ 0.578189] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.578199] l18: unable to resolve supply [ 0.578205] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.578215] l19: unable to resolve supply [ 0.578263] l20: Bringing 0uV into 2960000-2960000uV [ 0.584648] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.589791] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.596422] l20: ramp_delay not set [ 0.596438] l20: 2960 mV, disabled [ 0.596526] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.596539] l9: unable to resolve supply [ 0.596543] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.596554] l10: unable to resolve supply [ 0.596559] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.596569] l13: unable to resolve supply [ 0.596575] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.596585] l16: unable to resolve supply [ 0.596590] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.596601] l18: unable to resolve supply [ 0.596605] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.596616] l19: unable to resolve supply [ 0.596621] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.596632] l20: unable to resolve supply [ 0.596681] l21: Bringing 0uV into 2960000-2960000uV [ 0.603401] l21: ramp_delay not set [ 0.603418] l21: 2960 mV, disabled [ 0.603523] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.603536] l9: unable to resolve supply [ 0.603540] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.603551] l10: unable to resolve supply [ 0.603556] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.603566] l13: unable to resolve supply [ 0.603572] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.603583] l16: unable to resolve supply [ 0.603588] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.603599] l18: unable to resolve supply [ 0.603603] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.603613] l19: unable to resolve supply [ 0.603617] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.603628] l20: unable to resolve supply [ 0.603632] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.603643] l21: unable to resolve supply [ 0.603688] l22: Bringing 0uV into 2864000-2864000uV [ 0.608427] l22: ramp_delay not set [ 0.608442] l22: 2864 mV, disabled [ 0.608532] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.608545] l9: unable to resolve supply [ 0.608549] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.608561] l10: unable to resolve supply [ 0.608567] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.608578] l13: unable to resolve supply [ 0.608583] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.608594] l16: unable to resolve supply [ 0.608599] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.608610] l18: unable to resolve supply [ 0.608615] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.608626] l19: unable to resolve supply [ 0.608631] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.608642] l20: unable to resolve supply [ 0.608647] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.608657] l21: unable to resolve supply [ 0.608663] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.608674] l22: unable to resolve supply [ 0.608723] l23: Bringing 0uV into 3312000-3312000uV [ 0.613581] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.618901] l23: ramp_delay not set [ 0.618918] l23: 3312 mV, disabled [ 0.619006] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.619020] l9: unable to resolve supply [ 0.619025] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.619037] l10: unable to resolve supply [ 0.619043] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.619054] l13: unable to resolve supply [ 0.619060] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.619071] l16: unable to resolve supply [ 0.619076] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.619087] l18: unable to resolve supply [ 0.619092] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.619103] l19: unable to resolve supply [ 0.619108] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.619119] l20: unable to resolve supply [ 0.619123] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.619135] l21: unable to resolve supply [ 0.619140] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.619150] l22: unable to resolve supply [ 0.619155] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.619166] l23: unable to resolve supply [ 0.619214] l24: Bringing 0uV into 3088000-3088000uV [ 0.624041] PCI: CLS 0 bytes, default 64 [ 0.629080] Trying to unpack rootfs image as initramfs... [ 0.644380] l24: ramp_delay not set [ 0.644413] l24: 3088 mV, disabled [ 0.644540] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.644566] l9: unable to resolve supply [ 0.644571] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.644583] l10: unable to resolve supply [ 0.644589] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.644600] l13: unable to resolve supply [ 0.644606] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.644619] l16: unable to resolve supply [ 0.644624] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.644637] l18: unable to resolve supply [ 0.644642] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.644654] l19: unable to resolve supply [ 0.644658] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.644670] l20: unable to resolve supply [ 0.644676] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.644688] l21: unable to resolve supply [ 0.644692] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.644704] l22: unable to resolve supply [ 0.644708] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.644721] l23: unable to resolve supply [ 0.644726] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.644737] l24: unable to resolve supply [ 0.644823] l25: Bringing 0uV into 3104000-3104000uV [ 0.644917] l25: ramp_delay not set [ 0.644934] l25: 3104 <--> 3312 mV at 3104 mV, disabled [ 0.645027] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.645041] l9: unable to resolve supply [ 0.645046] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.645058] l10: unable to resolve supply [ 0.645062] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.645074] l13: unable to resolve supply [ 0.645079] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.645091] l16: unable to resolve supply [ 0.645096] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.645107] l18: unable to resolve supply [ 0.645112] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.645124] l19: unable to resolve supply [ 0.645128] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.645140] l20: unable to resolve supply [ 0.645145] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.645156] l21: unable to resolve supply [ 0.645161] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.645172] l22: unable to resolve supply [ 0.645178] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.645189] l23: unable to resolve supply [ 0.645193] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.645205] l24: unable to resolve supply [ 0.645209] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.645220] l25: unable to resolve supply [ 0.645273] l26: Bringing 0uV into 1200000-1200000uV [ 0.648957] l26: ramp_delay not set [ 0.648967] l26: 1200 mV, disabled [ 0.649057] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.649070] l9: unable to resolve supply [ 0.649075] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.649087] l10: unable to resolve supply [ 0.649092] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.649104] l13: unable to resolve supply [ 0.649109] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.649121] l16: unable to resolve supply [ 0.649126] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.649137] l18: unable to resolve supply [ 0.649142] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.649153] l19: unable to resolve supply [ 0.649157] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.649169] l20: unable to resolve supply [ 0.649174] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.649186] l21: unable to resolve supply [ 0.649191] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.649203] l22: unable to resolve supply [ 0.649208] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.649219] l23: unable to resolve supply [ 0.649224] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.649235] l24: unable to resolve supply [ 0.649240] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.649251] l25: unable to resolve supply [ 0.649256] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l26-supply from device tree [ 0.649266] l26: supplied by s3 [ 0.649366] l28: Bringing 0uV into 2800000-2800000uV [ 0.654525] Initialise system trusted keyrings [ 0.658952] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.673371] l28: ramp_delay not set [ 0.673407] l28: 2800 mV, disabled [ 0.673568] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.673596] l9: unable to resolve supply [ 0.673602] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.673614] l10: unable to resolve supply [ 0.673620] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.673632] l13: unable to resolve supply [ 0.673637] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.673650] l16: unable to resolve supply [ 0.673655] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.673668] l18: unable to resolve supply [ 0.673675] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.673688] l19: unable to resolve supply [ 0.673693] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.673707] l20: unable to resolve supply [ 0.673712] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.673725] l21: unable to resolve supply [ 0.673730] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.673743] l22: unable to resolve supply [ 0.673749] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.673761] l23: unable to resolve supply [ 0.673766] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.673780] l24: unable to resolve supply [ 0.673784] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.673798] l25: unable to resolve supply [ 0.673803] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.673814] l28: unable to resolve supply [ 0.673915] lvs1: will resolve supply early: vdd_lvs1_lvs2 [ 0.673921] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_lvs1_lvs2-supply from device tree [ 0.673932] lvs1: supplied by s4 [ 0.673941] s4: could not add device link regulator.33: -ENOENT [ 0.673976] lvs1: 1800 mV, disabled [ 0.674065] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.674079] l9: unable to resolve supply [ 0.674084] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.674096] l10: unable to resolve supply [ 0.674101] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.674113] l13: unable to resolve supply [ 0.674118] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.674130] l16: unable to resolve supply [ 0.674135] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.674147] l18: unable to resolve supply [ 0.674151] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.674164] l19: unable to resolve supply [ 0.674170] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.674181] l20: unable to resolve supply [ 0.674186] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.674197] l21: unable to resolve supply [ 0.674201] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.674212] l22: unable to resolve supply [ 0.674217] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.674228] l23: unable to resolve supply [ 0.674233] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.674244] l24: unable to resolve supply [ 0.674249] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.674261] l25: unable to resolve supply [ 0.674265] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.674276] l28: unable to resolve supply [ 0.674328] lvs2: will resolve supply early: vdd_lvs1_lvs2 [ 0.674335] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_lvs1_lvs2-supply from device tree [ 0.674344] lvs2: supplied by s4 [ 0.674351] s4: could not add device link regulator.34: -ENOENT [ 0.674394] lvs2: 1800 mV, disabled [ 0.674480] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.674493] l9: unable to resolve supply [ 0.674498] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.674510] l10: unable to resolve supply [ 0.674515] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.674527] l13: unable to resolve supply [ 0.674533] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.674545] l16: unable to resolve supply [ 0.674550] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.674561] l18: unable to resolve supply [ 0.674566] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.674578] l19: unable to resolve supply [ 0.674584] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.674596] l20: unable to resolve supply [ 0.674600] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.674612] l21: unable to resolve supply [ 0.674617] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.674629] l22: unable to resolve supply [ 0.674634] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.674645] l23: unable to resolve supply [ 0.674649] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.674661] l24: unable to resolve supply [ 0.674665] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.674677] l25: unable to resolve supply [ 0.674682] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.674693] l28: unable to resolve supply [ 0.675043] bob: Bringing 0uV into 3312000-3312000uV [ 0.675138] bob: ramp_delay not set [ 0.675145] bob: 3312 <--> 3600 mV at 3312 mV, disabled [ 0.675237] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 0.675252] l9: unable to resolve supply [ 0.675256] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.675268] l10: unable to resolve supply [ 0.675273] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.675285] l13: unable to resolve supply [ 0.675291] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.675303] l16: unable to resolve supply [ 0.675309] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.675321] l18: unable to resolve supply [ 0.675326] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.675338] l19: unable to resolve supply [ 0.675343] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.675355] l20: unable to resolve supply [ 0.675359] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 0.675371] l21: unable to resolve supply [ 0.675376] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 0.675389] l22: unable to resolve supply [ 0.675393] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.675405] l23: unable to resolve supply [ 0.675410] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 0.675422] l24: unable to resolve supply [ 0.675427] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 0.675439] l25: unable to resolve supply [ 0.675445] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 0.675457] l28: unable to resolve supply [ 0.675461] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pmi8998-regulators: Looking up vdd_bob-supply from device tree [ 0.675470] bob: supplied by vph_pwr [ 0.680979] fuse: init (API version 7.36) [ 0.723198] Freeing initrd memory: 1440K [ 0.735656] NET: Registered PF_ALG protocol family [ 0.735742] Key type asymmetric registered [ 0.739389] Asymmetric key parser 'x509' registered [ 0.743588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.748301] io scheduler mq-deadline registered [ 0.755895] io scheduler kyber registered [ 0.761584] qcom-qmp-phy 1c06000.phy: Looking up vdda-phy-supply from device tree [ 0.761736] qcom-qmp-phy 1c06000.phy: Looking up vdda-pll-supply from device tree [ 0.761888] phy phy-1c06000.phy.0: Looking up phy-supply from device tree [ 0.761896] phy phy-1c06000.phy.0: Looking up phy-supply property in node /soc/phy@1c06000/phy@1c06800 failed [ 0.762070] Added clk_hw provider from /soc/phy@1c06000/phy@1c06800 [ 0.762088] qcom-qmp-phy 1c06000.phy: Registered Qcom-QMP phy [ 0.764439] qcom-qmp-phy 1da7000.phy: Looking up vdda-phy-supply from device tree [ 0.764517] qcom-qmp-phy 1da7000.phy: Looking up vdda-pll-supply from device tree [ 0.764669] phy phy-1da7000.phy.1: Looking up phy-supply from device tree [ 0.764676] phy phy-1da7000.phy.1: Looking up phy-supply property in node /soc/phy@1da7000/phy@1da7400 failed [ 0.764754] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy [ 0.770334] qcom-qmp-phy c010000.phy: Looking up vdda-phy-supply from device tree [ 0.770410] qcom-qmp-phy c010000.phy: Looking up vdda-pll-supply from device tree [ 0.770577] phy phy-c010000.phy.2: Looking up phy-supply from device tree [ 0.770586] phy phy-c010000.phy.2: Looking up phy-supply property in node /soc/phy@c010000/phy@c010200 failed [ 0.770674] Added clk_hw provider from /soc/phy@c010000/phy@c010200 [ 0.770690] qcom-qmp-phy c010000.phy: Registered Qcom-QMP phy [ 0.777378] qcom-pcie 1c00000.pci: Looking up vdda-supply from device tree [ 0.777387] qcom-pcie 1c00000.pci: Looking up vdda-supply property in node /soc/pci@1c00000 failed [ 0.777409] qcom-pcie 1c00000.pci: supply vdda not found, using dummy regulator [ 0.781613] qcom-pcie 1c00000.pci: Looking up vddpe-3v3-supply from device tree [ 0.781621] qcom-pcie 1c00000.pci: Looking up vddpe-3v3-supply property in node /soc/pci@1c00000 failed [ 0.781640] qcom-pcie 1c00000.pci: supply vddpe-3v3 not found, using dummy regulator [ 0.788780] qcom-pcie 1c00000.pci: host bridge /soc/pci@1c00000 ranges: [ 0.796624] qcom-pcie 1c00000.pci: Parsing ranges property... [ 0.796641] qcom-pcie 1c00000.pci: IO 0x001b200000..0x001b2fffff -> 0x001b200000 [ 0.802996] qcom-pcie 1c00000.pci: MEM 0x001b300000..0x001bffffff -> 0x001b300000 [ 0.935215] qcom-pcie 1c00000.pci: iATU unroll: disabled [ 0.935299] qcom-pcie 1c00000.pci: Detected iATU regions: 32 outbound, 8 inbound [ 1.940200] qcom-pcie 1c00000.pci: Phy link never came up [ 1.940373] qcom-pcie 1c00000.pci: PCI host bridge to bus 0000:00 [ 1.944692] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.950711] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x1b200000-0x1b2fffff]) [ 1.956160] pci_bus 0000:00: root bus resource [mem 0x1b300000-0x1bffffff] [ 1.965785] pci_bus 0000:00: scanning bus [ 1.965838] pci 0000:00:00.0: [17cb:0105] type 01 class 0x060400 [ 1.972543] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 1.978934] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.984666] pci 0000:00:00.0: PME# disabled [ 1.984896] pci 0000:00:00.0: vgaarb: pci_notify [ 1.987521] pci_bus 0000:00: fixups for bus [ 1.987531] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0 [ 1.987633] pci_bus 0000:01: scanning bus [ 1.990045] pci_bus 0000:01: fixups for bus [ 1.990050] pci_bus 0000:01: bus scan returning with max=01 [ 1.990065] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1 [ 1.990082] pci_bus 0000:00: bus scan returning with max=ff [ 1.990101] pci 0000:00:00.0: BAR 0: assigned [mem 0x1b300000-0x1b300fff] [ 1.990267] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.997138] OF: /soc/pci@1c00000: no iommu-map translation for id 0x0 on (null) [ 2.002154] pcieport 0000:00:00.0: vgaarb: pci_notify [ 2.002222] pcieport 0000:00:00.0: assign IRQ: got 88 [ 2.002840] qcom-pcie 1c00000.pci: msi#0 address_hi 0x0 address_lo 0x40bda908 [ 2.002866] qcom-pcie 1c00000.pci: msi#1 address_hi 0x0 address_lo 0x40bda908 [ 2.002873] qcom-pcie 1c00000.pci: msi#2 address_hi 0x0 address_lo 0x40bda908 [ 2.002880] qcom-pcie 1c00000.pci: msi#3 address_hi 0x0 address_lo 0x40bda908 [ 2.002888] qcom-pcie 1c00000.pci: msi#4 address_hi 0x0 address_lo 0x40bda908 [ 2.002895] qcom-pcie 1c00000.pci: msi#5 address_hi 0x0 address_lo 0x40bda908 [ 2.002902] qcom-pcie 1c00000.pci: msi#6 address_hi 0x0 address_lo 0x40bda908 [ 2.002910] qcom-pcie 1c00000.pci: msi#7 address_hi 0x0 address_lo 0x40bda908 [ 2.002918] qcom-pcie 1c00000.pci: msi#8 address_hi 0x0 address_lo 0x40bda908 [ 2.002924] qcom-pcie 1c00000.pci: msi#9 address_hi 0x0 address_lo 0x40bda908 [ 2.002932] qcom-pcie 1c00000.pci: msi#10 address_hi 0x0 address_lo 0x40bda908 [ 2.002939] qcom-pcie 1c00000.pci: msi#11 address_hi 0x0 address_lo 0x40bda908 [ 2.002947] qcom-pcie 1c00000.pci: msi#12 address_hi 0x0 address_lo 0x40bda908 [ 2.002954] qcom-pcie 1c00000.pci: msi#13 address_hi 0x0 address_lo 0x40bda908 [ 2.002961] qcom-pcie 1c00000.pci: msi#14 address_hi 0x0 address_lo 0x40bda908 [ 2.002970] qcom-pcie 1c00000.pci: msi#15 address_hi 0x0 address_lo 0x40bda908 [ 2.002977] qcom-pcie 1c00000.pci: msi#16 address_hi 0x0 address_lo 0x40bda908 [ 2.002985] qcom-pcie 1c00000.pci: msi#17 address_hi 0x0 address_lo 0x40bda908 [ 2.002992] qcom-pcie 1c00000.pci: msi#18 address_hi 0x0 address_lo 0x40bda908 [ 2.003000] qcom-pcie 1c00000.pci: msi#19 address_hi 0x0 address_lo 0x40bda908 [ 2.003007] qcom-pcie 1c00000.pci: msi#20 address_hi 0x0 address_lo 0x40bda908 [ 2.003014] qcom-pcie 1c00000.pci: msi#21 address_hi 0x0 address_lo 0x40bda908 [ 2.003022] qcom-pcie 1c00000.pci: msi#22 address_hi 0x0 address_lo 0x40bda908 [ 2.003030] qcom-pcie 1c00000.pci: msi#23 address_hi 0x0 address_lo 0x40bda908 [ 2.003037] qcom-pcie 1c00000.pci: msi#24 address_hi 0x0 address_lo 0x40bda908 [ 2.003044] qcom-pcie 1c00000.pci: msi#25 address_hi 0x0 address_lo 0x40bda908 [ 2.003052] qcom-pcie 1c00000.pci: msi#26 address_hi 0x0 address_lo 0x40bda908 [ 2.003059] qcom-pcie 1c00000.pci: msi#27 address_hi 0x0 address_lo 0x40bda908 [ 2.003067] qcom-pcie 1c00000.pci: msi#28 address_hi 0x0 address_lo 0x40bda908 [ 2.003074] qcom-pcie 1c00000.pci: msi#29 address_hi 0x0 address_lo 0x40bda908 [ 2.003081] qcom-pcie 1c00000.pci: msi#30 address_hi 0x0 address_lo 0x40bda908 [ 2.003089] qcom-pcie 1c00000.pci: msi#31 address_hi 0x0 address_lo 0x40bda908 [ 2.003700] qcom-pcie 1c00000.pci: msi#0 address_hi 0x0 address_lo 0x40bda908 [ 2.003838] pcieport 0000:00:00.0: PME: Signaling with IRQ 89 [ 2.009583] pcieport 0000:00:00.0: AER: enabled with IRQ 89 [ 2.015449] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x10517cb) [ 2.015459] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100507) [ 2.015468] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0x6040000) [ 2.015476] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10000) [ 2.015485] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0x1b300000) [ 2.015493] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0) [ 2.015501] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0xff0100) [ 2.015509] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0xf0) [ 2.015517] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0xfff0) [ 2.015526] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x1fff1) [ 2.015534] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0) [ 2.015542] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0) [ 2.015550] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0) [ 2.015559] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x40) [ 2.015567] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0) [ 2.015575] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x20158) [ 2.015659] pcieport 0000:00:00.0: vgaarb: pci_notify [ 2.016784] Added clk_hw provider from /soc/clock-controller@5065000 [ 2.029650] Added clk_hw provider from /soc/clock-controller@c8c0000 [ 2.037503] msm_serial c171000.serial: msm_serial: detected port #1 [ 2.037623] msm_serial c171000.serial: uartclk = 19200000 [ 2.042707] c171000.serial: ttyMSM1 at MMIO 0xc171000 (irq = 50, base_baud = 1200000) is a MSM [ 2.048384] serial serial0: tty port ttyMSM1 registered [ 2.056884] msm_serial c1b0000.serial: msm_serial: detected port #0 [ 2.061885] msm_serial c1b0000.serial: uartclk = 1843200 [ 2.068097] c1b0000.serial: ttyMSM0 at MMIO 0xc1b0000 (irq = 52, base_baud = 115200) is a MSM [ 2.073707] msm_serial: console setup on port #0 [ 2.082112] printk: console [ttyMSM0] enabled [ 2.085554] printk: bootconsole [msm_serial_dm0] disabled [ 2.095471] msm_serial: driver initialized [ 2.100990] arm-smmu 1680000.iommu: probing hardware configuration... [ 2.104607] arm-smmu 1680000.iommu: SMMUv2 with: [ 2.111172] arm-smmu 1680000.iommu: stage 1 translation [ 2.115800] arm-smmu 1680000.iommu: address translation ops [ 2.121136] arm-smmu 1680000.iommu: non-coherent table walk [ 2.126738] arm-smmu 1680000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.132426] arm-smmu 1680000.iommu: stream matching with 16 register groups [ 2.139438] arm-smmu 1680000.iommu: 6 context banks (0 stage-2 only) [ 2.146998] arm-smmu 1680000.iommu: Supported page sizes: 0x63315000 [ 2.153037] arm-smmu 1680000.iommu: Stage-1: 36-bit VA -> 36-bit IPA [ 2.160543] arm-smmu 16c0000.iommu: probing hardware configuration... [ 2.165939] arm-smmu 16c0000.iommu: SMMUv2 with: [ 2.172314] arm-smmu 16c0000.iommu: stage 1 translation [ 2.177000] arm-smmu 16c0000.iommu: address translation ops [ 2.182336] arm-smmu 16c0000.iommu: non-coherent table walk [ 2.187984] arm-smmu 16c0000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.193635] arm-smmu 16c0000.iommu: stream matching with 14 register groups [ 2.200674] arm-smmu 16c0000.iommu: 10 context banks (0 stage-2 only) [ 2.208085] arm-smmu 16c0000.iommu: Supported page sizes: 0x63315000 [ 2.214286] arm-smmu 16c0000.iommu: Stage-1: 36-bit VA -> 36-bit IPA [ 2.221686] /soc/iommu@cd00000: Failed to get clk index: 2 ret: -517 [ 2.227228] arm-smmu cd00000.iommu: failed to get clocks -517 [ 2.240881] brd: module loaded [ 2.245348] loop: module loaded [ 2.245715] zram: Added device: zram0 [ 2.248014] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 2.251283] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: ref_clk clk get failed, -517 [ 2.261843] ufshcd-qcom 1da4000.ufshc: Initialization failed [ 2.269873] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed -517 [ 2.276413] spmi spmi-0: PMIC arbiter version v3 (0x30000000) [ 2.290116] s1: will resolve supply early: vdd_s1 [ 2.290127] qcom-spmi-regulator 800f000.spmi:pmic@5:pm8005-regulators: Looking up vdd_s1-supply from device tree [ 2.290163] s1: supplied by vph_pwr [ 2.290171] vph_pwr: could not add device link regulator.36: -ENOENT [ 2.290886] s1: 524 <--> 1100 mV at 752 mV, enabled [ 2.291029] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l9-supply from device tree [ 2.291059] l9: supplied by bob [ 2.291097] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 2.291113] l10: supplied by bob [ 2.291145] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 2.291160] l13: supplied by bob [ 2.291189] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 2.291205] l16: supplied by bob [ 2.291235] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 2.291249] l18: supplied by bob [ 2.291282] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 2.291297] l19: supplied by bob [ 2.291343] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 2.291357] l20: supplied by bob [ 2.291388] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l13_l19_l21-supply from device tree [ 2.291403] l21: supplied by bob [ 2.291434] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l18_l22-supply from device tree [ 2.291448] l22: supplied by bob [ 2.291482] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 2.291496] l23: supplied by bob [ 2.291529] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l20_l24-supply from device tree [ 2.291544] l24: supplied by bob [ 2.291587] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l10_l23_l25-supply from device tree [ 2.291602] l25: supplied by bob [ 2.291637] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: Looking up vdd_l16_l28-supply from device tree [ 2.291651] l28: supplied by bob [ 2.291727] s2: at 752 mV, disabled [ 2.291827] qcom-spmi-regulator 800f000.spmi:pmic@5:pm8005-regulators: Looking up vdd_s2-supply from device tree [ 2.291836] qcom-spmi-regulator 800f000.spmi:pmic@5:pm8005-regulators: Looking up vdd_s2-supply property in node /soc/spmi@800f000/pmic@5/pm8005-regulators failed [ 2.291870] s2: supplied by regulator-dummy [ 2.291944] s3: at 600 mV, enabled [ 2.292050] qcom-spmi-regulator 800f000.spmi:pmic@5:pm8005-regulators: Looking up vdd_s3-supply from device tree [ 2.292059] qcom-spmi-regulator 800f000.spmi:pmic@5:pm8005-regulators: Looking up vdd_s3-supply property in node /soc/spmi@800f000/pmic@5/pm8005-regulators failed [ 2.292082] s3: supplied by regulator-dummy [ 2.292155] s4: at 752 mV, enabled [ 2.292253] qcom-spmi-regulator 800f000.spmi:pmic@5:pm8005-regulators: Looking up vdd_s4-supply from device tree [ 2.292262] qcom-spmi-regulator 800f000.spmi:pmic@5:pm8005-regulators: Looking up vdd_s4-supply property in node /soc/spmi@800f000/pmic@5/pm8005-regulators failed [ 2.292287] s4: supplied by regulator-dummy [ 2.292773] tun: Universal TUN/TAP device driver, 1.6 [ 2.293103] PPP generic driver version 2.4.2 [ 2.296991] PPP BSD Compression module registered [ 2.301242] PPP Deflate Compression module registered [ 2.305979] PPP MPPE Compression module registered [ 2.311104] ath10k_snoc 18800000.wifi: Adding to iommu group 0 [ 2.316723] ath10k_snoc 18800000.wifi: Looking up vdd-0.8-cx-mx-supply from device tree [ 2.316816] ath10k_snoc 18800000.wifi: Looking up vdd-1.8-xo-supply from device tree [ 2.316900] ath10k_snoc 18800000.wifi: Looking up vdd-1.3-rfa-supply from device tree [ 2.316993] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch0-supply from device tree [ 2.317075] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply from device tree [ 2.317083] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply property in node /soc/wifi@18800000 failed [ 2.317114] ath10k_snoc 18800000.wifi: supply vdd-3.3-ch1 not found, using dummy regulator [ 2.323573] dwc3-qcom a8f8800.usb: error -ENXIO: IRQ dp_hs_phy_irq not found [ 2.329636] dwc3-qcom a8f8800.usb: error -ENXIO: IRQ dm_hs_phy_irq not found [ 2.337853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.343965] ehci-pci: EHCI PCI platform driver [ 2.350190] ehci-platform: EHCI generic platform driver [ 2.354982] usbcore: registered new interface driver usb-storage [ 2.359736] UDC core: couldn't find an available UDC - added [g_ether] to list of pending drivers [ 2.367185] rtc-pm8xxx 800f000.spmi:pmic@0:rtc@6000: registered as rtc0 [ 2.374831] rtc-pm8xxx 800f000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T00:10:55 UTC (655) [ 2.381210] i2c_dev: i2c /dev entries driver [ 2.392337] Goodix-TS 0-0014: Looking up AVDD28-supply from device tree [ 2.392437] Goodix-TS 0-0014: Looking up VDDIO-supply from device tree [ 2.393264] Goodix-TS 0-0014: Error reading 1 bytes from 0x8140: -6 [ 2.433373] Goodix-TS 0-0014: Error reading 1 bytes from 0x8140: -6 [ 2.473311] Goodix-TS 0-0014: I2C communication failure: -6 [ 2.475401] input: pm8941_pwrkey as /devices/platform/soc/800f000.spmi/spmi-0/0-00/800f000.spmi:pmic@0:pon@800/800f000.spmi:pmic@0:pon@800:pwrkey/input/input0 [ 2.478799] input: pm8941_resin as /devices/platform/soc/800f000.spmi/spmi-0/0-00/800f000.spmi:pmic@0:pon@800/800f000.spmi:pmic@0:pon@800:resin/input/input1 [ 2.496530] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com [ 2.506254] Bluetooth: HCI UART driver ver 2.3 [ 2.514554] Bluetooth: HCI UART protocol H4 registered [ 2.518899] hci_uart_qca serial0-0: Looking up vddio-supply from device tree [ 2.518990] hci_uart_qca serial0-0: Looking up vddxo-supply from device tree [ 2.519072] hci_uart_qca serial0-0: Looking up vddrf-supply from device tree [ 2.519155] hci_uart_qca serial0-0: Looking up vddch0-supply from device tree [ 2.519893] Bluetooth: HCI UART protocol QCA registered [ 2.524193] Bluetooth: hci0: setting up wcn399x [ 2.529342] usbcore: registered new interface driver btusb [ 2.533631] l7: DRMS operation not allowed [ 2.533730] l17: DRMS operation not allowed [ 2.533955] l25: DRMS operation not allowed [ 2.535427] sdhci: Secure Digital Host Controller Interface driver [ 2.539114] sdhci: Copyright(c) Pierre Ossman [ 2.545332] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.550134] sdhci_msm c0a4900.sdhci: Got CD GPIO [ 2.555926] ledtrig-cpu: registered to indicate activity on CPUs [ 2.560595] usbcore: registered new interface driver usbhid [ 2.566255] sdhci_msm c0a4900.sdhci: Looking up vmmc-supply from device tree [ 2.566354] sdhci_msm c0a4900.sdhci: Looking up vqmmc-supply from device tree [ 2.567172] usbhid: USB HID core driver [ 2.571372] l13: ramp_delay not set [ 2.577329] NET: Registered PF_INET6 protocol family [ 2.578018] Segment Routing with IPv6 [ 2.581474] In-situ OAM (IOAM) with IPv6 [ 2.585267] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.589368] NET: Registered PF_PACKET protocol family [ 2.594658] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.599965] Bluetooth: HIDP socket layer initialized [ 2.605686] mmc0: SDHCI controller on c0a4900.sdhci [c0a4900.sdhci] using ADMA 64-bit [ 2.610905] 8021q: 802.1Q VLAN Support v1.8 [ 2.618978] registered taskstats version 1 [ 2.622737] Loading compiled-in X.509 certificates [ 2.653789] qcom-qusb2-phy c012000.phy: Looking up vdd-supply from device tree [ 2.653810] qcom-qusb2-phy c012000.phy: Looking up vdd-supply property in node /soc/phy@c012000 failed [ 2.653866] qcom-qusb2-phy c012000.phy: supply vdd not found, using dummy regulator [ 2.654115] qcom-qusb2-phy c012000.phy: Looking up vdda-pll-supply from device tree [ 2.654197] qcom-qusb2-phy c012000.phy: Looking up vdda-phy-dpdm-supply from device tree [ 2.654302] phy phy-c012000.phy.3: Looking up phy-supply from device tree [ 2.654309] phy phy-c012000.phy.3: Looking up phy-supply property in node /soc/phy@c012000 failed [ 2.654387] qcom-qusb2-phy c012000.phy: Registered Qcom-QUSB2 phy [ 2.662199] /soc/iommu@cd00000: Failed to get clk index: 2 ret: -517 [ 2.666745] arm-smmu cd00000.iommu: failed to get clocks -517 [ 2.674051] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 2.678860] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: ref_clk clk get failed, -517 [ 2.689393] ufshcd-qcom 1da4000.ufshc: Initialization failed [ 2.697384] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed -517 [ 2.704256] irq: type mismatch, failed to map hwirq-445 for interrupt-controller@17a00000! [ 2.709547] irq: type mismatch, failed to map hwirq-446 for interrupt-controller@17a00000! [ 2.717837] irq: type mismatch, failed to map hwirq-447 for interrupt-controller@17a00000! [ 2.726734] irq: type mismatch, failed to map hwirq-448 for interrupt-controller@17a00000! [ 2.734438] irq: type mismatch, failed to map hwirq-449 for interrupt-controller@17a00000! [ 2.742765] Bluetooth: hci0: QCA Product ID :0x0000000a [ 2.750770] Bluetooth: hci0: QCA SOC Version :0x40010214 [ 2.756272] Bluetooth: hci0: QCA ROM Version :0x00000201 [ 2.761595] Bluetooth: hci0: QCA Patch Version:0x00000001 [ 2.767141] mmc0: new high speed SD card at address 5331 [ 2.772385] irq: type mismatch, failed to map hwirq-450 for interrupt-controller@17a00000! [ 2.778030] Bluetooth: hci0: QCA controller version 0x02140201 [ 2.785827] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv [ 2.793232] mmcblk0: mmc0:5331 SD02G 1.83 GiB [ 2.797517] irq: type mismatch, failed to map hwirq-452 for interrupt-controller@17a00000! [ 2.801854] irq: type mismatch, failed to map hwirq-453 for interrupt-controller@17a00000! [ 2.811256] irq: type mismatch, failed to map hwirq-454 for interrupt-controller@17a00000! [ 2.818426] irq: type mismatch, failed to map hwirq-455 for interrupt-controller@17a00000! [ 2.826675] irq: type mismatch, failed to map hwirq-456 for interrupt-controller@17a00000! [ 2.835009] irq: type mismatch, failed to map hwirq-457 for interrupt-controller@17a00000! [ 2.843529] ath10k_snoc 18800000.wifi: Looking up vdd-0.8-cx-mx-supply from device tree [ 2.843705] ath10k_snoc 18800000.wifi: Looking up vdd-1.8-xo-supply from device tree [ 2.843787] ath10k_snoc 18800000.wifi: Looking up vdd-1.3-rfa-supply from device tree [ 2.843889] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch0-supply from device tree [ 2.843969] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply from device tree [ 2.843978] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply property in node /soc/wifi@18800000 failed [ 2.844028] ath10k_snoc 18800000.wifi: supply vdd-3.3-ch1 not found, using dummy regulator [ 2.851455] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 [ 2.869133] using random self ethernet address [ 2.877310] using random host ethernet address [ 2.881870] usb0: HOST MAC f2:c9:4b:cc:95:e8 [ 2.885855] usb0: MAC 42:4e:3d:ec:ab:de [ 2.890259] using random self ethernet address [ 2.893938] using random host ethernet address [ 2.898428] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 2.902811] g_ether gadget: g_ether ready [ 2.915542] qcom-q6v5-mss 4080000.remoteproc: Failed to get proxy clocks. [ 2.915681] remoteproc remoteproc0: releasing 4080000.remoteproc [ 2.921981] remoteproc remoteproc0: releasing 5800000.remoteproc [ 2.928112] remoteproc remoteproc0: releasing 17300000.remoteproc [ 2.934014] /soc/iommu@cd00000: Failed to get clk index: 2 ret: -517 [ 2.939469] arm-smmu cd00000.iommu: failed to get clocks -517 [ 2.946597] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 2.951592] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: ref_clk clk get failed, -517 [ 2.962239] ufshcd-qcom 1da4000.ufshc: Initialization failed [ 2.970197] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed -517 [ 2.976916] irq: type mismatch, failed to map hwirq-445 for interrupt-controller@17a00000! [ 2.982356] irq: type mismatch, failed to map hwirq-446 for interrupt-controller@17a00000! [ 2.990659] irq: type mismatch, failed to map hwirq-447 for interrupt-controller@17a00000! [ 2.998831] irq: type mismatch, failed to map hwirq-448 for interrupt-controller@17a00000! [ 3.007196] irq: type mismatch, failed to map hwirq-449 for interrupt-controller@17a00000! [ 3.015393] irq: type mismatch, failed to map hwirq-450 for interrupt-controller@17a00000! [ 3.023639] irq: type mismatch, failed to map hwirq-452 for interrupt-controller@17a00000! [ 3.031874] irq: type mismatch, failed to map hwirq-453 for interrupt-controller@17a00000! [ 3.040116] irq: type mismatch, failed to map hwirq-454 for interrupt-controller@17a00000! [ 3.048342] irq: type mismatch, failed to map hwirq-455 for interrupt-controller@17a00000! [ 3.056633] irq: type mismatch, failed to map hwirq-456 for interrupt-controller@17a00000! [ 3.064855] irq: type mismatch, failed to map hwirq-457 for interrupt-controller@17a00000! [ 3.073442] ath10k_snoc 18800000.wifi: Looking up vdd-0.8-cx-mx-supply from device tree [ 3.073569] ath10k_snoc 18800000.wifi: Looking up vdd-1.8-xo-supply from device tree [ 3.073648] ath10k_snoc 18800000.wifi: Looking up vdd-1.3-rfa-supply from device tree [ 3.073731] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch0-supply from device tree [ 3.073818] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply from device tree [ 3.073827] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply property in node /soc/wifi@18800000 failed [ 3.073873] ath10k_snoc 18800000.wifi: supply vdd-3.3-ch1 not found, using dummy regulator [ 3.082737] qcom-q6v5-mss 4080000.remoteproc: Failed to get proxy clocks. [ 3.089535] remoteproc remoteproc0: releasing 4080000.remoteproc [ 3.097117] remoteproc remoteproc0: releasing 5800000.remoteproc [ 3.102894] remoteproc remoteproc0: releasing 17300000.remoteproc [ 3.109117] /soc/iommu@cd00000: Failed to get clk index: 2 ret: -517 [ 3.114530] arm-smmu cd00000.iommu: failed to get clocks -517 [ 3.121566] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 3.126622] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: ref_clk clk get failed, -517 [ 3.137228] ufshcd-qcom 1da4000.ufshc: Initialization failed [ 3.145135] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed -517 [ 3.151937] irq: type mismatch, failed to map hwirq-445 for interrupt-controller@17a00000! [ 3.157256] irq: type mismatch, failed to map hwirq-446 for interrupt-controller@17a00000! [ 3.165706] irq: type mismatch, failed to map hwirq-447 for interrupt-controller@17a00000! [ 3.173934] irq: type mismatch, failed to map hwirq-448 for interrupt-controller@17a00000! [ 3.182104] irq: type mismatch, failed to map hwirq-449 for interrupt-controller@17a00000! [ 3.190397] irq: type mismatch, failed to map hwirq-450 for interrupt-controller@17a00000! [ 3.198634] irq: type mismatch, failed to map hwirq-452 for interrupt-controller@17a00000! [ 3.206858] irq: type mismatch, failed to map hwirq-453 for interrupt-controller@17a00000! [ 3.215187] irq: type mismatch, failed to map hwirq-454 for interrupt-controller@17a00000! [ 3.223339] irq: type mismatch, failed to map hwirq-455 for interrupt-controller@17a00000! [ 3.231584] irq: type mismatch, failed to map hwirq-456 for interrupt-controller@17a00000! [ 3.239910] irq: type mismatch, failed to map hwirq-457 for interrupt-controller@17a00000! [ 3.248391] ath10k_snoc 18800000.wifi: Looking up vdd-0.8-cx-mx-supply from device tree [ 3.248503] ath10k_snoc 18800000.wifi: Looking up vdd-1.8-xo-supply from device tree [ 3.248581] ath10k_snoc 18800000.wifi: Looking up vdd-1.3-rfa-supply from device tree [ 3.248662] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch0-supply from device tree [ 3.248746] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply from device tree [ 3.248755] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply property in node /soc/wifi@18800000 failed [ 3.248797] ath10k_snoc 18800000.wifi: supply vdd-3.3-ch1 not found, using dummy regulator [ 3.258708] input: Hall sensors as /devices/platform/gpio-hall-sensors/input/input2 [ 3.265464] qcom-q6v5-mss 4080000.remoteproc: Failed to get proxy clocks. [ 3.272065] remoteproc remoteproc0: releasing 4080000.remoteproc [ 3.279888] input: Keyboard extra keys as /devices/platform/gpio-kb-extra-keys/input/input3 [ 3.286371] input: Side buttons as /devices/platform/gpio-keys/input/input4 [ 3.293979] remoteproc remoteproc0: releasing 5800000.remoteproc [ 3.300526] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.307097] remoteproc remoteproc0: releasing 17300000.remoteproc [ 3.315078] /soc/iommu@cd00000: Failed to get clk index: 2 ret: -517 [ 3.320272] arm-smmu cd00000.iommu: failed to get clocks -517 [ 3.327430] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.332270] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.338660] clk: Not disabling unused clocks [ 3.347788] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 3.351880] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 3.359428] ALSA device list: [ 3.369865] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: ref_clk clk get failed, -517 [ 3.372966] ufshcd-qcom 1da4000.ufshc: Initialization failed [ 3.380705] No soundcards found. [ 3.387857] Freeing unused kernel memory: 4288K [ 3.393472] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed -517 [ 3.394755] irq: type mismatch, failed to map hwirq-445 for interrupt-controller@17a00000! [ 3.399009] irq: type mismatch, failed to map hwirq-446 for interrupt-controller@17a00000! [ 3.407509] irq: type mismatch, failed to map hwirq-447 for interrupt-controller@17a00000! [ 3.415652] irq: type mismatch, failed to map hwirq-448 for interrupt-controller@17a00000! [ 3.423887] Run /init as init process [ 3.432163] irq: type mismatch, failed to map hwirq-449 for interrupt-controller@17a00000! [ 3.435848] irq: type mismatch, failed to map hwirq-450 for interrupt-controller@17a00000! [ 3.443998] with arguments: [ 3.444003] /init [ 3.444007] PMOS_NO_OUTPUT_REDIRECT [ 3.444010] with environment: [ 3.444014] HOME=/ [ 3.444018] TERM=linux [ 3.447238] random: fast init done [ 3.456053] irq: type mismatch, failed to map hwirq-452 for interrupt-controller@17a00000! [ 3.456199] irq: type mismatch, failed to map hwirq-453 for interrupt-controller@17a00000! [ 3.469803] irq: type mismatch, failed to map hwirq-454 for interrupt-controller@17a00000! [ 3.472100] irq: type mismatch, failed to map hwirq-455 for interrupt-controller@17a00000! [ 3.481836] irq: type mismatch, failed to map hwirq-456 for interrupt-controller@17a00000! [ 3.489990] irq: type mismatch, failed to map hwirq-457 for interrupt-controller@17a00000! [ 3.498562] ath10k_snoc 18800000.wifi: Looking up vdd-0.8-cx-mx-supply from device tree [ 3.498704] ath10k_snoc 18800000.wifi: Looking up vdd-1.8-xo-supply from device tree [ 3.498783] ath10k_snoc 18800000.wifi: Looking up vdd-1.3-rfa-supply from device tree [ 3.498871] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch0-supply from device tree [ 3.498959] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply from device tree [ 3.498968] ath10k_snoc 18800000.wifi: Looking up vdd-3.3-ch1-supply property in node /soc/wifi@18800000 failed [ 3.499018] ath10k_snoc 18800000.wifi: supply vdd-3.3-ch1 not found, using dummy regulator [ 3.534986] qcom-q6v5-mss 4080000.remoteproc: Failed to get proxy clocks. [ 3.535144] remoteproc remoteproc0: releasing 4080000.remoteproc [ 3.553760] remoteproc remoteproc0: releasing 5800000.remoteproc [ 3.843327] Bluetooth: hci0: QCA Downloading qca/crnv21.bin [ 3.871801] Bluetooth: hci0: QCA setup on UART is completed [ 6.073464] l25: DRMS operation not allowed [ 6.073609] l17: DRMS operation not allowed [ 6.073704] l7: DRMS operation not allowed [ 27.103054] using random self ethernet address [ 27.105734] using random host ethernet address [ 27.116003] UDC core: couldn't find an available UDC or it's busy: -16 / #