```
git.repo/bleskomat [ make upload                                                                             master ] 11:08 PM
cd ./device && npm run compile:upload

> bleskomat-device@1.0.0 compile:upload /home/user/projects/bleskomat/git.repo/bleskomat/device
> platformio run --upload-port /dev/ttyUSB0 --target upload

Processing bleskomat32 (platform: espressif32; board: esp32dev; framework: arduino)
-------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html
PLATFORM: Espressif 32 (2.0.0) > Espressif ESP32 Dev Module
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (esp-prog) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES: 
 - framework-arduinoespressif32 3.10004.200129 (1.0.4) 
 - tool-esptoolpy 1.20600.0 (2.6.0) 
 - tool-mkspiffs 2.230.0 (2.30) 
 - toolchain-xtensa32 2.50200.80 (5.2.0)
LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 28 compatible libraries
Scanning dependencies...
Dependency Graph
|-- <QRCode> 0.0.1
|-- <TFT_eSPI> 2.2.21
|   |-- <SPIFFS> 1.0
|   |   |-- <FS> 1.0
|   |-- <FS> 1.0
|   |-- <SPI> 1.0
|-- <SPI> 1.0
Building in release mode
Retrieving maximum program size .pio/build/bleskomat32/firmware.elf
Checking size .pio/build/bleskomat32/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [=         ]   6.7% (used 21932 bytes from 327680 bytes)
Flash: [====      ]  40.0% (used 523787 bytes from 1310720 bytes)
Configuring upload protocol...
AVAILABLE: esp-prog, espota, esptool, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa
CURRENT: upload_protocol = esptool
Looking for upload port...
Use manually specified: /dev/ttyUSB0
Uploading .pio/build/bleskomat32/firmware.bin
esptool.py v2.6
Serial port /dev/ttyUSB0
Connecting........_____....._____....._____....._____....._____....._____....._____

A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header
*** [upload] Error 2
================================================= [FAILED] Took 24.51 seconds =================================================
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! bleskomat-device@1.0.0 compile:upload: `platformio run --upload-port /dev/ttyUSB0 --target upload`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the bleskomat-device@1.0.0 compile:upload script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm WARN Local package.json exists, but node_modules missing, did you mean to install?

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/user/.npm/_logs/2020-10-02T21_08_54_228Z-debug.log
make: *** [Makefile:62: upload] Error 1

```

trochu som sa zasekol ( https://github.com/samotari/bleskomat#installing-libraries-and-dependencies )

netusite co mi tam chyba, lebo node_modules znie skor ako generic name, neviem najst nic konkretne

21.03pre244416.daaa0e33505 (Okapi)