```
LINUXCNC - 2.9.0-pre0-2180-ga14b08a70
Machine configuration directory is '/home/chris/dev/probe_basic/config/probe_basic_lathe'
Machine configuration file is 'probe_basic_lathe.ini'
Starting LinuxCNC...
Unrecognized line skipped: ;Tool  Pocket X Offset     Z Offset     Fnt Ang      Bak Ang      Diameter     Orient Remark
Found file(REL): ./hallib/core_sim_2.hal
Note: Using POSIX realtime
Found file(REL): ./hallib/simulated_home_xz.hal
Found file(REL): ./hallib/simulated_lathe.hal
[qtpyvcp.lib.decorators][WARNING]  Deprecation Warning: The widget "qtpyvcp.widgets.display_widgets.load_meter.LoadMeter" has been deprecated and will be removed in the future. Reason: new base class implementation. Replaced by: BarIndicator. (decorators.py:25)
task: main loop took 0.358484 seconds
[qtpyvcp.widgets.button_widgets.subcall_button][ERROR]  No value given for parameter x_tool_change_position, and no default specified (subcall_button.py:93)
[qtpyvcp.widgets.button_widgets.subcall_button][ERROR]  No value given for parameter x_tool_change_position, and no default specified (subcall_button.py:93)
[qtpyvcp.widgets.button_widgets.subcall_button][ERROR]  No value given for parameter x_tool_change_position, and no default specified (subcall_button.py:93)
[qtpyvcp.widgets.button_widgets.subcall_button][ERROR]  No value given for parameter x_tool_change_position, and no default specified (subcall_button.py:93)
[qtpyvcp.widgets.button_widgets.subcall_button][ERROR]  No value given for parameter x_tool_change_position, and no default specified (subcall_button.py:93)
[qtpyvcp.widgets.button_widgets.subcall_button][ERROR]  No value given for parameter x_tool_change_position, and no default specified (subcall_button.py:93)
[qtpyvcp.widgets.button_widgets.subcall_button][ERROR]  No value given for parameter x_tool_change_position, and no default specified (subcall_button.py:93)
[qtpyvcp.widgets.button_widgets.subcall_button][ERROR]  No value given for parameter x_tool_change_position, and no default specified (subcall_button.py:93)
Shutting down and cleaning up LinuxCNC...
task: 7914 cycles, min=0.000059, max=0.358484, avg=0.010070, 1 latency excursions (> 10x expected cycle time of 0.010000s)
Note: Using POSIX realtime