o<probe_z_minus> sub
#<probe_tool_number> = #1    (=99)
#<max_z_distance> = #2       (=0.5000)
#<max_xy_distance> = #3      (=0.5000)
#<xy_clearance> = #4         (=0.1000)
#<z_clearance> = #5          (=0.1000)
#<step_off_width> = #6       (=0.5000)
#<extra_probe_depth> = #7    (=0.0000)
#<probe_slow_fr> = #8        (=0.0)
#<probe_fast_fr> = #9        (=10.0)
#<calibration_offset> = #10  (=0.0000)
#<x_hint> = #11              (=1.0000)
#<y_hint> = #12              (=1.0000)
#<diameter_hint> = #13       (=1.0000)
#<edge_width> = #14          (=0.5000)

some cool stuff

now probe z minus
o<pzminus> call [#1] [#2] [#3] [#4] [#5] [#6] [#7] [#8] [#9] [#10] [#11] [#12] [#13] [#14]

o<probe_z_minus> endsub

o<pzminus> sub

#<probe_tool_number> = #1
#<max_z_distance> = #2
#<max_xy_distance> = #3
#<xy_clearance> = #4
#<z_clearance> = #5
#<step_off_width> = #6
#<extra_probe_depth> = #7
#<probe_slow_fr> = #8
#<probe_fast_fr> = #9
#<calibration_offset> = #10
#<x_hint> = #11
#<y_hint> = #12
#<diameter_hint> = #13
#<edge_width> = #14

some cool stuff with names or numbers

o<pzminus> endsub