```"#<probe_tool_number> = #1    (=99)
  #<max_z_distance> = #2       (=0.5000)
  #<max_xy_distance> = #3      (=0.5000)
  #<xy_clearance> = #4         (=0.1000)
  #<z_clearance> = #5          (=0.1000)
  #<step_off_width> = #6       (=0.5000)
  #<extra_probe_depth> = #7    (=0.0000)
  #<probe_slow_fr> = #8        (=0.0)
  #<probe_fast_fr> = #9        (=10.0)
  #<calibration_offset> = #10  (=0.0000)
  #<x_hint> = #11              (=1.0000)
  #<y_hint> = #12              (=1.0000)
  #<diameter_hint> = #13       (=1.0000)
  #<edge_width> = #14          (=0.5000)