[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 6.5.0-rc5 (pmos@ubuntu) (aarch64-alpine-linux-musl-gcc (Alpine 13.1.1_git20230722) 13.1.1 20230722, GNU ld (GNU Binutils) 2.40) #1-realme-porsche SMP PREEMPT Wed Aug 30 07:52:48 UTC 2023 [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Qualcomm Technologies, Inc. Lahaina MTP [ 0.000000] efi: UEFI not found. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000d8000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node memshare_region, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000d8000000..0x00000000d87fffff (8192 KiB) nomap non-reusable memshare_region [ 0.000000] OF: reserved mem: 0x0000000080000000..0x00000000805fffff (6144 KiB) nomap non-reusable memory@80000000 [ 0.000000] OF: reserved mem: 0x0000000080700000..0x000000008085ffff (1408 KiB) nomap non-reusable memory@80700000 [ 0.000000] OF: reserved mem: 0x0000000080860000..0x000000008087ffff (128 KiB) nomap non-reusable memory@80860000 [ 0.000000] OF: reserved mem: 0x0000000080880000..0x0000000080893fff (80 KiB) nomap non-reusable memory@80880000 [ 0.000000] OF: reserved mem: 0x0000000080900000..0x0000000080afffff (2048 KiB) nomap non-reusable smem@80900000 [ 0.000000] OF: reserved mem: 0x0000000080b00000..0x0000000080bfffff (1024 KiB) nomap non-reusable memory@80b00000 [ 0.000000] OF: reserved mem: 0x0000000080c00000..0x00000000851fffff (71680 KiB) nomap non-reusable memory@80c00000 [ 0.000000] OF: reserved mem: 0x0000000085200000..0x00000000856fffff (5120 KiB) nomap non-reusable mmeory@85200000 [ 0.000000] OF: reserved mem: 0x0000000085700000..0x0000000085bfffff (5120 KiB) nomap non-reusable memory@85700000 [ 0.000000] OF: reserved mem: 0x0000000085c00000..0x00000000860fffff (5120 KiB) nomap non-reusable memory@85c00000 [ 0.000000] OF: reserved mem: 0x0000000086100000..0x00000000881fffff (33792 KiB) nomap non-reusable memory@86100000 [ 0.000000] OF: reserved mem: 0x0000000088200000..0x00000000896fffff (21504 KiB) nomap non-reusable memory@88200000 [ 0.000000] OF: reserved mem: 0x0000000089700000..0x000000008b4fffff (30720 KiB) nomap non-reusable memory@89700000 [ 0.000000] OF: reserved mem: 0x000000008b500000..0x000000008b50ffff (64 KiB) nomap non-reusable memory@8b500000 [ 0.000000] OF: reserved mem: 0x000000008b510000..0x000000008b519fff (40 KiB) nomap non-reusable memory@8b510000 [ 0.000000] OF: reserved mem: 0x000000008b51a000..0x000000008b51bfff (8 KiB) nomap non-reusable memory@8b51a000 [ 0.000000] OF: reserved mem: 0x000000008b600000..0x000000008b6fffff (1024 KiB) nomap non-reusable memory@8b600000 [ 0.000000] OF: reserved mem: 0x000000008b800000..0x000000009b7fffff (262144 KiB) nomap non-reusable memory@8b800000 [ 0.000000] OF: reserved mem: 0x000000009b800000..0x000000009ba7ffff (2560 KiB) nomap non-reusable memory@9b800000 [ 0.000000] OF: reserved mem: 0x000000009fe00000..0x000000009fffffff (2048 KiB) nomap non-reusable kboot_uboot_logmem@9fe00000 [ 0.000000] OF: reserved mem: 0x00000000d0000000..0x00000000d07fffff (8192 KiB) nomap non-reusable memory@d0000000 [ 0.000000] OF: reserved mem: 0x00000000d0800000..0x00000000d7ef6fff (121820 KiB) nomap non-reusable memory@d0800000 [ 0.000000] OF: reserved mem: 0x00000000d7ef7000..0x00000000d7efffff (36 KiB) nomap non-reusable memory@d7ef7000 [ 0.000000] OF: reserved mem: 0x00000000d7f00000..0x00000000d7f7ffff (512 KiB) nomap non-reusable memory@d7f00000 [ 0.000000] OF: reserved mem: 0x00000000d7f80000..0x00000000d7ffffff (512 KiB) nomap non-reusable memory@d7f80000 [ 0.000000] OF: reserved mem: 0x00000000d8800000..0x00000000e15fffff (145408 KiB) nomap non-reusable memory@d8800000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x27f1059c0-0x27f107fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000805fffff] [ 0.000000] node 0: [mem 0x0000000080600000-0x00000000806fffff] [ 0.000000] node 0: [mem 0x0000000080700000-0x0000000080893fff] [ 0.000000] node 0: [mem 0x0000000080894000-0x00000000808fffff] [ 0.000000] node 0: [mem 0x0000000080900000-0x000000008b51bfff] [ 0.000000] node 0: [mem 0x000000008b51c000-0x000000008b5fffff] [ 0.000000] node 0: [mem 0x000000008b600000-0x000000008b6fffff] [ 0.000000] node 0: [mem 0x000000008b700000-0x000000008b7fffff] [ 0.000000] node 0: [mem 0x000000008b800000-0x000000009ba7ffff] [ 0.000000] node 0: [mem 0x000000009ba80000-0x000000009fdfffff] [ 0.000000] node 0: [mem 0x000000009fe00000-0x000000009fffffff] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000b96fffff] [ 0.000000] node 0: [mem 0x00000000c0000000-0x00000000cfffffff] [ 0.000000] node 0: [mem 0x00000000d0000000-0x00000000e15fffff] [ 0.000000] node 0: [mem 0x00000000e1600000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 26880 pages in unavailable ranges [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] percpu: Embedded 20 pages/cpu s43624 r8192 d30104 u81920 [ 0.000000] pcpu-alloc: s43624 r8192 d30104 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: clk_ignore_unused PMOS_NO_OUTPUT_REDIRECT lk_version=V1.0 androidboot.startupmode=usb_charger androidboot.mode=reboot printk.disable_uart=1 short_c_feature_sw_status=0 phx_rus_conf.main_on=1 phx_rus_conf.recovery_method=2 phx_rus_conf.kernel_time=240 phx_rus_conf.android_time=250 smooth_soc_switch=0 simcardnum.doublesim=1 androidboot.opt_sim_count=2 androidboot.prjname=136882 esim.status=0 androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.boot_devices=soc/1d84000.ufshc androidboot.serialno=de952c21 androidboot.baseband=msm msm_drm.dsi_display0=qcom,mdss_dsi_oplus21617samsung_ams662zs01_1080_2400_cmd_dvt: oplus_bsp_tp_custom.dsi_display0=qcom,mdss_dsi_oplus21617samsung_ams662zs01_1080_2400_cmd_dvt:focaltech,ft3658u androidboot.slot_suffix=_a rootwait ro init=/init androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.force_normal_boot=1 androidboot.mode=normal androidboot.project_codename= [ 0.000000] Unknown kernel command line parameters "lk_version=V1.0 short_c_feature_sw_status=0 smooth_soc_switch=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2037504 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) [ 0.000000] Memory: 7247944K/8281088K available (19776K kernel code, 2812K rwdata, 8296K rodata, 4992K init, 568K bss, 1000376K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: 988 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000223] Console: colour dummy device 80x25 [ 0.000232] printk: console [tty0] enabled [ 0.000970] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.000989] pid_max: default: 32768 minimum: 301 [ 0.001062] LSM: initializing lsm=capability,integrity [ 0.001146] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001174] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002543] rcu: Hierarchical SRCU implementation. [ 0.002555] rcu: Max phase no-delay instances is 1000. [ 0.004196] EFI services will not be available. [ 0.004420] smp: Bringing up secondary CPUs ... [ 0.005383] Detected VIPT I-cache on CPU1 [ 0.005439] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000 [ 0.005517] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.006434] Detected VIPT I-cache on CPU2 [ 0.006477] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000 [ 0.006544] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.007313] Detected VIPT I-cache on CPU3 [ 0.007354] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000 [ 0.007419] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.010258] CPU features: detected: Spectre-v4 [ 0.010271] CPU features: detected: Spectre-BHB [ 0.010357] Detected PIPT I-cache on CPU4 [ 0.010471] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000 [ 0.010592] CPU4: Booted secondary processor 0x0000000400 [0x411fd410] [ 0.011733] Detected PIPT I-cache on CPU5 [ 0.011871] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000 [ 0.012000] CPU5: Booted secondary processor 0x0000000500 [0x411fd410] [ 0.013143] Detected PIPT I-cache on CPU6 [ 0.013295] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000 [ 0.013431] CPU6: Booted secondary processor 0x0000000600 [0x411fd410] [ 0.016336] Detected PIPT I-cache on CPU7 [ 0.016398] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000 [ 0.016457] CPU7: Booted secondary processor 0x0000000700 [0x411fd440] [ 0.016524] smp: Brought up 1 node, 8 CPUs [ 0.016652] SMP: Total of 8 processors activated. [ 0.016661] CPU features: detected: 32-bit EL0 Support [ 0.016669] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.016679] CPU features: detected: Common not Private translations [ 0.016687] CPU features: detected: CRC32 instructions [ 0.016695] CPU features: detected: Data cache clean to Point of Persistence [ 0.016705] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.016713] CPU features: detected: LSE atomic instructions [ 0.016721] CPU features: detected: Privileged Access Never [ 0.016729] CPU features: detected: RAS Extension Support [ 0.016738] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.016828] CPU: All CPU(s) started at EL1 [ 0.016845] alternatives: applying system-wide alternatives [ 0.023583] devtmpfs: initialized [ 0.034631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.034656] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.035216] pinctrl core: initialized pinctrl subsystem [ 0.035612] ************************************************************* [ 0.035620] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.035628] ** ** [ 0.035636] ** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL ** [ 0.035644] ** ** [ 0.035651] ** This means that this kernel is built to expose internal ** [ 0.035659] ** IOMMU data structures, which may compromise security on ** [ 0.035666] ** your system. ** [ 0.035673] ** ** [ 0.035681] ** If you see this message and you are not debugging the ** [ 0.035688] ** kernel, report this immediately to your vendor! ** [ 0.035695] ** ** [ 0.035702] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.035710] ************************************************************* [ 0.035810] regulator-dummy: no parameters, enabled [ 0.035818] DMI not present or invalid. [ 0.036121] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.037179] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.037346] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.037568] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.037616] audit: initializing netlink subsys (disabled) [ 0.037730] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1 [ 0.038109] i2c-core: driver [dummy] registered [ 0.038154] thermal_sys: Registered thermal governor 'step_wise' [ 0.038158] thermal_sys: Registered thermal governor 'power_allocator' [ 0.038213] cpuidle: using governor menu [ 0.038352] NET: Registered PF_QIPCRTR protocol family [ 0.038840] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.039005] ASID allocator initialised with 32768 entries [ 0.039976] Serial: AMBA PL011 UART driver [ 0.049368] platform 1d87000.phy: Fixed dependency cycle(s) with /soc@0/ufshc@1d84000 [ 0.052909] platform ae00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000 [ 0.057798] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.057810] Modules: 0 pages in range for non-PLT usage [ 0.057813] Modules: 515120 pages in range for PLT usage [ 0.058242] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.058259] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.058269] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.058278] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.058287] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.058295] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.058304] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.058312] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.058843] cryptd: max_cpu_qlen set to 1000 [ 0.125434] raid6: neonx8 gen() 2824 MB/s [ 0.193554] raid6: neonx4 gen() 2772 MB/s [ 0.261699] raid6: neonx2 gen() 2710 MB/s [ 0.329806] raid6: neonx1 gen() 2355 MB/s [ 0.397931] raid6: int64x8 gen() 1777 MB/s [ 0.466071] raid6: int64x4 gen() 1957 MB/s [ 0.534181] raid6: int64x2 gen() 1864 MB/s [ 0.602335] raid6: int64x1 gen() 1456 MB/s [ 0.602344] raid6: using algorithm neonx8 gen() 2824 MB/s [ 0.670466] raid6: .... xor() 2101 MB/s, rmw enabled [ 0.670477] raid6: using neon recovery algorithm [ 0.670658] i2c-core: driver [max732x] registered [ 0.670677] i2c-core: driver [pca953x] registered [ 0.670921] ACPI: Interpreter disabled. [ 0.672457] i2c-core: driver [max8973] registered [ 0.672460] vph_pwr: 3700 mV, enabled [ 0.672559] reg-fixed-voltage vph-pwr-regulator: vph_pwr supplying 3700000uV [ 0.672862] iommu: Default domain type: Translated [ 0.672875] iommu: DMA domain TLB invalidation policy: strict mode [ 0.672946] i2c-core: driver [rohm-bd718x7] registered [ 0.673093] SCSI subsystem initialized [ 0.673196] libata version 3.00 loaded. [ 0.673337] usbcore: registered new interface driver usbfs [ 0.673366] usbcore: registered new interface driver hub [ 0.673398] usbcore: registered new device driver usb [ 0.673757] mc: Linux media interface: v0.10 [ 0.673782] videodev: Linux video capture interface: v2.00 [ 0.673840] pps_core: LinuxPPS API ver. 1 registered [ 0.673850] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.673874] PTP clock support registered [ 0.674016] EDAC MC: Ver: 3.0.0 [ 0.674291] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode [ 0.674571] qcom_scm: convention: smc arm 64 [ 0.674847] scmi_core: SCMI protocol bus registered [ 0.675120] FPGA manager framework [ 0.675199] Advanced Linux Sound Architecture Driver Initialized. [ 0.675748] Bluetooth: Core ver 2.22 [ 0.675776] NET: Registered PF_BLUETOOTH protocol family [ 0.675786] Bluetooth: HCI device and connection manager initialized [ 0.675800] Bluetooth: HCI socket layer initialized [ 0.675812] Bluetooth: L2CAP socket layer initialized [ 0.675828] Bluetooth: SCO socket layer initialized [ 0.675993] nfc: nfc_init: NFC Core ver 0.1 [ 0.676044] NET: Registered PF_NFC protocol family [ 0.676121] vgaarb: loaded [ 0.676767] clocksource: Switched to clocksource arch_sys_counter [ 0.676912] VFS: Disk quotas dquot_6.6.0 [ 0.676942] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.677084] pnp: PnP ACPI: disabled [ 0.682226] NET: Registered PF_INET protocol family [ 0.682381] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.686466] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.686535] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.686559] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.686865] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.688301] TCP: Hash tables configured (established 65536 bind 65536) [ 0.688378] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.688469] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.688624] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.688895] RPC: Registered named UNIX socket transport module. [ 0.688908] RPC: Registered udp transport module. [ 0.688917] RPC: Registered tcp transport module. [ 0.688925] RPC: Registered tcp-with-tls transport module. [ 0.688934] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.689616] PCI: CLS 0 bytes, default 64 [ 0.689765] Unpacking initramfs... [ 0.705095] kvm [1]: HYP mode not available [ 0.705921] Initialise system trusted keyrings [ 0.706040] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 0.706101] zbud: loaded [ 0.706300] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.706482] NFS: Registering the id_resolver key type [ 0.706504] Key type id_resolver registered [ 0.706513] Key type id_legacy registered [ 0.706534] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.706550] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.706654] fuse: init (API version 7.38) [ 0.706823] 9p: Installing v9fs 9p2000 file system support [ 0.727252] Freeing initrd memory: 1496K [ 0.731762] xor: measuring software checksum speed [ 0.734916] 8regs : 3163 MB/sec [ 0.738260] 32regs : 2958 MB/sec [ 0.741439] arm64_neon : 3112 MB/sec [ 0.741448] xor: using function: 8regs (3163 MB/sec) [ 0.741462] Key type asymmetric registered [ 0.741473] Asymmetric key parser 'x509' registered [ 0.741516] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 0.741530] io scheduler mq-deadline registered [ 0.741540] io scheduler kyber registered [ 0.748223] i2c-core: driver [lp855x] registered [ 0.748333] IPMI message handler: version 39.2 [ 0.748385] ipmi device interface [ 0.748490] ipmi_si: IPMI System Interface driver [ 0.748674] ipmi_si: Unable to find any System Interface(s) [ 0.748897] EINJ: ACPI disabled. [ 0.749175] i2c-core: driver [cs2000-cp] registered [ 0.749339] i2c-core: driver [vc5] registered [ 0.756492] i2c-core: driver [fan53555-regulator] registered [ 0.757391] i2c-core: driver [tps65132] registered [ 0.759459] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.760972] msm_serial: driver initialized [ 0.761380] i2c-core: driver [tpm_i2c_infineon] registered [ 0.764555] arm-smmu 15000000.iommu: probing hardware configuration... [ 0.764569] arm-smmu 15000000.iommu: SMMUv2 with: [ 0.764592] arm-smmu 15000000.iommu: stage 1 translation [ 0.764602] arm-smmu 15000000.iommu: non-coherent table walk [ 0.764612] arm-smmu 15000000.iommu: (IDR0.CTTW overridden by FW configuration) [ 0.764623] arm-smmu 15000000.iommu: stream matching with 89 register groups [ 0.764641] arm-smmu 15000000.iommu: 75 context banks (0 stage-2 only) [ 0.765071] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000 [ 0.765083] arm-smmu 15000000.iommu: Stage-1: 36-bit VA -> 36-bit IPA [ 0.765293] arm-smmu 15000000.iommu: preserved 0 boot mappings [ 0.766551] usbcore: registered new interface driver udl [ 0.768225] i2c-core: driver [ch7006] registered [ 0.768247] i2c-core: driver [sil164] registered [ 0.768263] i2c-core: driver [tda998x] registered [ 0.768410] i2c-core: driver [lt8912] registered [ 0.768427] i2c-core: driver [lt9611] registered [ 0.768442] i2c-core: driver [lt9611uxc] registered [ 0.768460] i2c-core: driver [ps8640] registered [ 0.768552] i2c-core: driver [sii902x] registered [ 0.768737] i2c-core: driver [adv7511] registered [ 0.768754] i2c-core: driver [ti_sn65dsi86] registered [ 0.773730] loop: module loaded [ 0.784446] zram: Added device: zram0 [ 0.784599] i2c-core: driver [bd9571mwv] registered [ 0.784618] i2c-core: driver [axp20x-i2c] registered [ 0.784634] i2c-core: driver [max77620] registered [ 0.785166] megasas: 07.725.01.00-rc1 [ 0.786898] spmi spmi-0: PMIC arbiter version v5 (0x50020000) [ 0.798759] spmi spmi-0: pmic_arb_wait_for_done: 0x5 0x104: transaction failed (0x3) [ 0.798808] ------------[ cut here ]------------ [ 0.798817] WARNING: CPU: 0 PID: 1 at drivers/spmi/spmi-pmic-arb.c:292 pmic_arb_wait_for_done+0x12c/0x164 [ 0.798845] Modules linked in: [ 0.798858] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc5 #1-realme-porsche [ 0.798872] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP (DT) [ 0.798881] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.798893] pc : pmic_arb_wait_for_done+0x12c/0x164 [ 0.798905] lr : pmic_arb_wait_for_done+0x12c/0x164 [ 0.798917] sp : ffff80008005b650 [ 0.798924] x29: ffff80008005b650 x28: 0000000000000104 x27: 0000000000000005 [ 0.798940] x26: ffff22d841b3f318 x25: 0000000008000040 x24: 0000000000000104 [ 0.798957] x23: 0000000000000005 x22: ffff22d841b3f000 x21: ffff80008100d308 [ 0.798973] x20: 0000000000000003 x19: 00000000000003e6 x18: ffffffffffffffff [ 0.798989] x17: 6c696166206e6f69 x16: 746361736e617274 x15: 0720072007200720 [ 0.799005] x14: 0720072007200720 x13: ffffdf0b39511028 x12: 00000000000003ea [ 0.799021] x11: 000000000000014e x10: ffffdf0b39569028 x9 : ffffdf0b39511028 [ 0.799037] x8 : 00000000ffffefff x7 : ffffdf0b39569028 x6 : 80000000fffff000 [ 0.799053] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 0.799068] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff22d840120000 [ 0.799084] Call trace: [ 0.799091] pmic_arb_wait_for_done+0x12c/0x164 [ 0.799104] pmic_arb_read_cmd+0xd4/0x1a0 [ 0.799115] spmi_ext_register_readl+0x54/0x68 [ 0.799127] regmap_spmi_ext_read+0xd4/0xfc [ 0.799140] _regmap_raw_read+0xec/0x16c [ 0.799153] _regmap_bus_read+0x44/0x7c [ 0.799163] _regmap_read+0x60/0xd8 [ 0.799173] regmap_read+0x4c/0x78 [ 0.799183] pmic_spmi_probe+0x80/0x1b8 [ 0.799196] spmi_drv_probe+0x4c/0xec [ 0.799206] really_probe+0x188/0x3c4 [ 0.799217] __driver_probe_device+0x7c/0x16c [ 0.799226] driver_probe_device+0x3c/0x110 [ 0.799236] __device_attach_driver+0xbc/0x158 [ 0.799246] bus_for_each_drv+0x80/0xdc [ 0.799258] __device_attach+0x9c/0x1ac [ 0.799268] device_initial_probe+0x14/0x20 [ 0.799277] bus_probe_device+0xac/0xb0 [ 0.799289] device_add+0x638/0x82c [ 0.799300] spmi_device_add+0x34/0xd8 [ 0.799310] spmi_controller_add+0x108/0x230 [ 0.799321] spmi_pmic_arb_probe+0x330/0x760 [ 0.799332] platform_probe+0x68/0xc4 [ 0.799343] really_probe+0x188/0x3c4 [ 0.799352] __driver_probe_device+0x7c/0x16c [ 0.799361] driver_probe_device+0x3c/0x110 [ 0.799370] __driver_attach+0xf0/0x1f8 [ 0.799379] bus_for_each_dev+0x74/0xd4 [ 0.799390] driver_attach+0x24/0x30 [ 0.799402] bus_add_driver+0x114/0x224 [ 0.799413] driver_register+0x5c/0x124 [ 0.799422] __platform_driver_register+0x28/0x34 [ 0.799433] spmi_pmic_arb_driver_init+0x1c/0x28 [ 0.799447] do_one_initcall+0x68/0x1ac [ 0.799459] kernel_init_freeable+0x1b8/0x280 [ 0.799472] kernel_init+0x24/0x1dc [ 0.799484] ret_from_fork+0x10/0x20 [ 0.799495] ---[ end trace 0000000000000000 ]--- [ 0.799506] pmic-spmi: probe of 0-05 failed with error -5 [ 0.801269] tun: Universal TUN/TAP device driver, 1.6 [ 0.801379] CAN device driver interface [ 0.801811] thunder_xcv, ver 1.0 [ 0.801838] thunder_bgx, ver 1.0 [ 0.801861] nicpf, ver 1.0 [ 0.802259] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.802272] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.802306] hclge is initializing [ 0.802322] e1000: Intel(R) PRO/1000 Network Driver [ 0.802331] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.802355] e1000e: Intel(R) PRO/1000 Network Driver [ 0.802364] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.802391] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.802400] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.802426] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.802436] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.802559] sky2: driver version 1.30 [ 0.803105] usbcore: registered new interface driver ath10k_usb [ 0.803828] VFIO - User Level meta-driver version: 0.3 [ 0.805306] usbcore: registered new interface driver cdc_acm [ 0.805318] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.805344] usbcore: registered new interface driver usb-storage [ 0.805392] usbcore: registered new interface driver usbserial_generic [ 0.805416] usbserial: USB Serial support registered for generic [ 0.805438] usbcore: registered new interface driver cp210x [ 0.805459] usbserial: USB Serial support registered for cp210x [ 0.805480] usbcore: registered new interface driver ftdi_sio [ 0.805504] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.805528] usbcore: registered new interface driver option [ 0.805548] usbserial: USB Serial support registered for GSM modem (1-port) [ 0.805570] usbcore: registered new interface driver qcaux [ 0.805590] usbserial: USB Serial support registered for qcaux [ 0.805613] usbcore: registered new interface driver qcserial [ 0.805634] usbserial: USB Serial support registered for Qualcomm USB modem [ 0.805657] i2c-core: driver [usb3503] registered [ 0.806954] UDC core: g_ether: couldn't find an available UDC [ 0.806977] gadgetfs: USB Gadget filesystem, version 24 Aug 2004 [ 0.806991] file system registered [ 0.807012] UDC core: g_mass_storage: couldn't find an available UDC [ 0.807039] UDC core: g_serial: couldn't find an available UDC [ 0.807061] UDC core: g_multi: couldn't find an available UDC [ 0.807095] i2c-core: driver [typec_fusb302] registered [ 0.807111] i2c-core: driver [tcpci] registered [ 0.807214] i2c-core: driver [tps6598x] registered [ 0.807231] i2c-core: driver [hd3ss3220] registered [ 0.807361] i2c-core: driver [fts-i2c] registered [ 0.807770] i2c-core: driver [rtc-ds3232] registered [ 0.808588] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6100: registered as rtc0 [ 0.808641] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6100: setting system clock to 1970-07-16T03:33:21 UTC (16947201) [ 0.808696] i2c_dev: i2c /dev entries driver [ 0.809501] i2c-core: driver [pca954x] registered [ 0.809593] i2c-core: driver [ir-kbd-i2c] registered [ 0.810778] input: pmic_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@1300/c440000.spmi:pmic@0:pon@1300:pwrkey/input/input0 [ 0.811419] i2c-core: driver [sbs-battery] registered [ 0.811441] i2c-core: driver [bq27xxx-battery] registered [ 0.811770] i2c-core: driver [ina3221] registered [ 0.812302] spmi-temp-alarm c440000.spmi:pmic@1:temp-alarm@a00: error -ENODEV: failed to register sensor [ 0.812531] spmi-temp-alarm c440000.spmi:pmic@3:temp-alarm@a00: error -ENODEV: failed to register sensor [ 0.813401] spmi-temp-alarm c440000.spmi:pmic@4:temp-alarm@a00: error -ENODEV: failed to register sensor [ 0.813915] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.813933] Bluetooth: HCI UART driver ver 2.3 [ 0.813943] Bluetooth: HCI UART protocol H4 registered [ 0.813966] Bluetooth: HCI UART protocol QCA registered [ 0.815451] sdhci: Secure Digital Host Controller Interface driver [ 0.815463] sdhci: Copyright(c) Pierre Ossman [ 0.815947] Synopsys Designware Multimedia Card Interface Driver [ 0.816382] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.817829] ledtrig-cpu: registered to indicate activity on CPUs [ 0.818562] usbcore: registered new interface driver usbhid [ 0.818574] usbhid: USB HID core driver [ 0.818597] i2c-core: driver [i2c_hid_acpi] registered [ 0.818614] i2c-core: driver [i2c_hid_of] registered [ 0.820593] qcom-spmi-adc5 c440000.spmi:pmic@0:adc@3100: error -EINVAL: adc get dt data failed [ 0.820610] qcom-spmi-adc5: probe of c440000.spmi:pmic@0:adc@3100 failed with error -22 [ 0.821311] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.822441] gnss: GNSS driver registered with major 502 [ 0.822483] usbcore: registered new interface driver gnss-usb [ 0.824371] NET: Registered PF_PACKET protocol family [ 0.824384] can: controller area network core [ 0.824413] NET: Registered PF_CAN protocol family [ 0.824499] Bluetooth: RFCOMM socket layer initialized [ 0.824516] Bluetooth: RFCOMM ver 1.11 [ 0.824529] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.824546] Bluetooth: HIDP socket layer initialized [ 0.824610] 9pnet: Installing 9P2000 support [ 0.824650] Key type dns_resolver registered [ 0.835151] Loading compiled-in X.509 certificates [ 0.841719] Btrfs loaded, zoned=no, fsverity=no [ 0.852223] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps11 [ 0.852733] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps12 [ 0.852758] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/bob [ 0.852805] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/smps1 [ 0.853288] pm8350_s10: Setting 1800000-1800000uV [ 0.853625] pm8350_s10: 1800 mV, enabled [ 0.853756] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-s10-supply from device tree [ 0.853803] pm8350_s10: supplied by vph_pwr [ 0.853837] qcom-rpmh-regulator 18200000.rsc:regulators-0: smps10 regulator registered for RPMh resource smpb10 @ 0x40900 [ 0.853869] platform 18200000.rsc:regulators-3: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-3/smps1 [ 0.853896] pm8350_s11: Setting 752000-1000000uV [ 0.853901] platform 18200000.rsc:regulators-3: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-3/smps2 [ 0.853993] pm8350_s11: 752 <--> 1000 mV at 752 mV, enabled [ 0.854087] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-s11-supply from device tree [ 0.854097] pm8350_s11: supplied by vph_pwr [ 0.854120] qcom-rpmh-regulator 18200000.rsc:regulators-0: smps11 regulator registered for RPMh resource smpb11 @ 0x40000 [ 0.854193] pm8350_s12: Setting 1224000-1360000uV [ 0.854296] pm8350_s12: 1224 <--> 1360 mV at 1224 mV, enabled [ 0.854399] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-s12-supply from device tree [ 0.854408] pm8350_s12: supplied by vph_pwr [ 0.854442] qcom-rpmh-regulator 18200000.rsc:regulators-0: smps12 regulator registered for RPMh resource smpb12 @ 0x40100 [ 0.854570] pm8350_l1: Setting 912000-920000uV [ 0.854615] pm8350_l1: 912 <--> 920 mV at 912 mV, enabled [ 0.854701] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l1-l4-supply from device tree [ 0.854711] pm8350_l1: supplied by pm8350_s11 [ 0.854735] qcom-rpmh-regulator 18200000.rsc:regulators-0: ldo1 regulator registered for RPMh resource ldob1 @ 0x40A00 [ 0.854803] pm8350_l2: Setting 3072000-3072000uV [ 0.854810] pm8350c_s1: Setting 1800000-1952000uV [ 0.854835] pm8350c_s1: override min_uV, 1800000 -> 1808000 [ 0.854871] pm8350_l2: 3072 mV, enabled [ 0.854925] pm8350c_s1: 1808 <--> 1952 mV at 1808 mV, enabled [ 0.854944] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.854953] pm8350_l2: unable to resolve supply [ 0.854959] qcom-rpmh-regulator 18200000.rsc:regulators-0: ldo2 regulator registered for RPMh resource ldob2 @ 0x40E00 [ 0.855016] pm8350_l3: Setting 904000-904000uV [ 0.855026] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855037] pm8350_l2: unable to resolve supply [ 0.855042] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-s1-supply from device tree [ 0.855049] pm8350c_s1: supplied by vph_pwr [ 0.855073] qcom-rpmh-regulator 18200000.rsc:regulators-1: smps1 regulator registered for RPMh resource smpc1 @ 0x40200 [ 0.855078] pm8350_l3: 904 mV, enabled [ 0.855133] pm8350c_s2: Setting 640000-1000000uV [ 0.855159] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855168] pm8350_l2: unable to resolve supply [ 0.855173] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855180] pm8350_l3: unable to resolve supply [ 0.855185] qcom-rpmh-regulator 18200000.rsc:regulators-0: ldo3 regulator registered for RPMh resource ldob3 @ 0x40B00 [ 0.855203] pm8350c_s2: 640 <--> 1000 mV at 640 mV, enabled [ 0.855247] pm8350_l5: Setting 880000-888000uV [ 0.855283] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855293] pm8350_l2: unable to resolve supply [ 0.855298] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855305] pm8350_l3: unable to resolve supply [ 0.855310] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-s2-supply from device tree [ 0.855313] pm8350_l5: 880 <--> 888 mV at 880 mV normal idle, enabled [ 0.855317] pm8350c_s2: supplied by vph_pwr [ 0.855348] qcom-rpmh-regulator 18200000.rsc:regulators-1: smps2 regulator registered for RPMh resource smpc2 @ 0x41F00 [ 0.855393] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855404] pm8350_l2: unable to resolve supply [ 0.855408] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855409] pm8350c_s3: Setting 300000-704000uV [ 0.855416] pm8350_l3: unable to resolve supply [ 0.855422] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855429] pm8350_l5: unable to resolve supply [ 0.855434] qcom-rpmh-regulator 18200000.rsc:regulators-0: ldo5 regulator registered for RPMh resource ldob5 @ 0x40D00 [ 0.855479] pm8350c_s3: 300 <--> 704 mV at 300 mV, enabled [ 0.855497] pm8350_l6: Setting 1200000-1208000uV [ 0.855560] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855561] pm8350_l6: 1200 <--> 1208 mV at 1200 mV normal idle, enabled [ 0.855570] pm8350_l2: unable to resolve supply [ 0.855575] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855583] pm8350_l3: unable to resolve supply [ 0.855587] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855595] pm8350_l5: unable to resolve supply [ 0.855599] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-s3-supply from device tree [ 0.855606] pm8350c_s3: supplied by vph_pwr [ 0.855641] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l6-l9-l10-supply from device tree [ 0.855643] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855650] pm8350_l6: supplied by pm8350_s11 [ 0.855654] pm8350_l2: unable to resolve supply [ 0.855660] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855668] pm8350_l3: unable to resolve supply [ 0.855672] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855676] qcom-rpmh-regulator 18200000.rsc:regulators-1: smps3 regulator registered for RPMh resource smpc3 @ 0x42000 [ 0.855679] pm8350_l5: unable to resolve supply [ 0.855684] qcom-rpmh-regulator 18200000.rsc:regulators-0: ldo6 regulator registered for RPMh resource ldob6 @ 0x41900 [ 0.855747] pm8350c_s10: Setting 1048000-1128000uV [ 0.855756] pm8350_l7: Setting 2400000-3008000uV [ 0.855808] pm8350_l7: 2400 <--> 3008 mV at 2400 mV normal idle, enabled [ 0.855856] pm8350c_s10: 1048 <--> 1128 mV at 1048 mV, enabled [ 0.855892] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855902] pm8350_l2: unable to resolve supply [ 0.855907] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855914] pm8350_l3: unable to resolve supply [ 0.855919] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855927] pm8350_l5: unable to resolve supply [ 0.855932] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855939] pm8350_l7: unable to resolve supply [ 0.855944] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-s10-supply from device tree [ 0.855945] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855952] pm8350c_s10: supplied by vph_pwr [ 0.855957] pm8350_l2: unable to resolve supply [ 0.855962] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855970] pm8350_l3: unable to resolve supply [ 0.855975] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.855979] qcom-rpmh-regulator 18200000.rsc:regulators-0: ldo7 regulator registered for RPMh resource ldob7 @ 0x40F00 [ 0.855983] pm8350_l5: unable to resolve supply [ 0.855987] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.855995] pm8350_l7: unable to resolve supply [ 0.856000] qcom-rpmh-regulator 18200000.rsc:regulators-1: smps10 regulator registered for RPMh resource smpc10 @ 0x42400 [ 0.856049] pm8350_l9: Setting 1200000-1200000uV [ 0.856060] vreg_bob: Setting 3008000-3960000uV [ 0.856076] vreg_bob: override min_uV, 3008000 -> 3032000 [ 0.856119] pm8350_l9: 1200 mV normal idle, enabled [ 0.856135] vreg_bob: 3032 <--> 3960 mV at 3032 mV, enabled [ 0.856208] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.856220] pm8350_l2: unable to resolve supply [ 0.856225] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.856225] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.856241] pm8350_l2: unable to resolve supply [ 0.856242] pm8350_l3: unable to resolve supply [ 0.856247] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.856248] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.856256] pm8350_l5: unable to resolve supply [ 0.856260] pm8350_l3: unable to resolve supply [ 0.856261] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.856265] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.856271] pm8350_l7: unable to resolve supply [ 0.856277] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l6-l9-l10-supply from device tree [ 0.856277] pm8350_l5: unable to resolve supply [ 0.856283] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.856284] pm8350_l9: supplied by pm8350_s11 [ 0.856295] pm8350_l7: unable to resolve supply [ 0.856299] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l6-l9-l10-supply from device tree [ 0.856308] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-bob-supply from device tree [ 0.856309] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-bob-supply from device tree [ 0.856316] vreg_bob: supplied by vph_pwr [ 0.856346] qcom-rpmh-regulator 18200000.rsc:regulators-1: bob regulator registered for RPMh resource bobc1 @ 0x40300 [ 0.856346] qcom-rpmh-regulator 18200000.rsc:regulators-0: ldo9 regulator registered for RPMh resource ldob9 @ 0x41A00 [ 0.856443] pm8350c_l1: Setting 1800000-1800000uV [ 0.856505] pm8350c_l1: 1800 mV, enabled [ 0.856620] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.856631] pm8350_l2: unable to resolve supply [ 0.856636] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.856644] pm8350_l3: unable to resolve supply [ 0.856649] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.856656] pm8350_l5: unable to resolve supply [ 0.856661] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.856669] pm8350_l7: unable to resolve supply [ 0.856673] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l1-l12-supply from device tree [ 0.856680] pm8350c_l1: supplied by pm8350c_s1 [ 0.856717] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo1 regulator registered for RPMh resource ldoc1 @ 0x42500 [ 0.856798] pm8350c_l2: Setting 1800000-1800000uV [ 0.856863] pm8350c_l2: 1800 mV, enabled [ 0.856945] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.856956] pm8350_l2: unable to resolve supply [ 0.856961] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.856969] pm8350_l3: unable to resolve supply [ 0.856973] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.856981] pm8350_l5: unable to resolve supply [ 0.856986] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.856994] pm8350_l7: unable to resolve supply [ 0.856998] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l2-l8-supply from device tree [ 0.857006] pm8350c_l2: supplied by pm8350c_s1 [ 0.857031] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo2 regulator registered for RPMh resource ldoc2 @ 0x42600 [ 0.857094] pm8350c_l3: Setting 3304000-3304000uV [ 0.857506] pm8350c_l3: 3304 mV, enabled [ 0.857591] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.857602] pm8350_l2: unable to resolve supply [ 0.857607] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.857615] pm8350_l3: unable to resolve supply [ 0.857619] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.857628] pm8350_l5: unable to resolve supply [ 0.857632] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.857640] pm8350_l7: unable to resolve supply [ 0.857645] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l3-l4-l5-l7-l13-supply from device tree [ 0.857653] pm8350c_l3: supplied by vreg_bob [ 0.857678] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo3 regulator registered for RPMh resource ldoc3 @ 0x41000 [ 0.857747] pm8350c_l4: Setting 1704000-3000000uV [ 0.858124] pm8350c_l4: 1704 <--> 3000 mV at 1704 mV, enabled [ 0.858207] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.858218] pm8350_l2: unable to resolve supply [ 0.858222] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.858230] pm8350_l3: unable to resolve supply [ 0.858235] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.858243] pm8350_l5: unable to resolve supply [ 0.858248] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.858255] pm8350_l7: unable to resolve supply [ 0.858260] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l3-l4-l5-l7-l13-supply from device tree [ 0.858269] pm8350c_l4: supplied by vreg_bob [ 0.858307] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo4 regulator registered for RPMh resource ldoc4 @ 0x41100 [ 0.858372] pm8350c_l5: Setting 1704000-3000000uV [ 0.858739] pm8350c_l5: 1704 <--> 3000 mV at 1704 mV, enabled [ 0.858818] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.858829] pm8350_l2: unable to resolve supply [ 0.858834] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.858842] pm8350_l3: unable to resolve supply [ 0.858846] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.858854] pm8350_l5: unable to resolve supply [ 0.858859] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.858866] pm8350_l7: unable to resolve supply [ 0.858872] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l3-l4-l5-l7-l13-supply from device tree [ 0.858881] pm8350c_l5: supplied by vreg_bob [ 0.858910] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo5 regulator registered for RPMh resource ldoc5 @ 0x41200 [ 0.858980] pm8350c_l6: Setting 1800000-2960000uV [ 0.859345] pm8350c_l6: 1800 <--> 2960 mV at 1800 mV, enabled [ 0.859429] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.859440] pm8350_l2: unable to resolve supply [ 0.859445] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.859453] pm8350_l3: unable to resolve supply [ 0.859458] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.859465] pm8350_l5: unable to resolve supply [ 0.859470] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.859477] pm8350_l7: unable to resolve supply [ 0.859483] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l6-l9-l11-supply from device tree [ 0.859491] pm8350c_l6: supplied by vreg_bob [ 0.859520] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo6 regulator registered for RPMh resource ldoc6 @ 0x41300 [ 0.859586] pm8350c_l7: Setting 3008000-3008000uV [ 0.859951] pm8350c_l7: 3008 mV, enabled [ 0.860032] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.860043] pm8350_l2: unable to resolve supply [ 0.860048] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.860056] pm8350_l3: unable to resolve supply [ 0.860060] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.860068] pm8350_l5: unable to resolve supply [ 0.860073] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.860080] pm8350_l7: unable to resolve supply [ 0.860086] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l3-l4-l5-l7-l13-supply from device tree [ 0.860095] pm8350c_l7: supplied by vreg_bob [ 0.860131] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo7 regulator registered for RPMh resource ldoc7 @ 0x41400 [ 0.860197] pm8350c_l8: Setting 1800000-1800000uV [ 0.860555] pm8350c_l8: 1800 mV, enabled [ 0.860640] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.860651] pm8350_l2: unable to resolve supply [ 0.860655] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.860664] pm8350_l3: unable to resolve supply [ 0.860668] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.860676] pm8350_l5: unable to resolve supply [ 0.860681] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.860689] pm8350_l7: unable to resolve supply [ 0.860695] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l2-l8-supply from device tree [ 0.860703] pm8350c_l8: supplied by pm8350c_s1 [ 0.860728] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo8 regulator registered for RPMh resource ldoc8 @ 0x42700 [ 0.860823] pm8350c_l9: Setting 2960000-2960000uV [ 0.861132] pm8350c_l9: 2960 mV, enabled [ 0.861220] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.861231] pm8350_l2: unable to resolve supply [ 0.861236] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.861245] pm8350_l3: unable to resolve supply [ 0.861249] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.861258] pm8350_l5: unable to resolve supply [ 0.861262] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.861270] pm8350_l7: unable to resolve supply [ 0.861276] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l6-l9-l11-supply from device tree [ 0.861284] pm8350c_l9: supplied by vreg_bob [ 0.861309] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo9 regulator registered for RPMh resource ldoc9 @ 0x41500 [ 0.861380] pm8350c_l10: Setting 1200000-1200000uV [ 0.861742] pm8350c_l10: 1200 mV, enabled [ 0.861826] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.861837] pm8350_l2: unable to resolve supply [ 0.861842] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.861850] pm8350_l3: unable to resolve supply [ 0.861855] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.861862] pm8350_l5: unable to resolve supply [ 0.861868] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.861875] pm8350_l7: unable to resolve supply [ 0.861881] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l10-supply from device tree [ 0.861889] pm8350c_l10: supplied by pm8350_s12 [ 0.861925] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo10 regulator registered for RPMh resource ldoc10 @ 0x41B00 [ 0.861995] pm8350c_l11: Setting 2400000-3008000uV [ 0.862211] pm8350c_l11: 2400 <--> 3008 mV at 2400 mV, enabled [ 0.862287] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.862298] pm8350_l2: unable to resolve supply [ 0.862303] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.862311] pm8350_l3: unable to resolve supply [ 0.862316] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.862323] pm8350_l5: unable to resolve supply [ 0.862328] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.862336] pm8350_l7: unable to resolve supply [ 0.862342] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l6-l9-l11-supply from device tree [ 0.862350] pm8350c_l11: supplied by vreg_bob [ 0.862380] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo11 regulator registered for RPMh resource ldoc11 @ 0x41600 [ 0.862461] pm8350c_l12: Setting 1800000-2000000uV [ 0.862666] pm8350c_l12: 1800 <--> 2000 mV at 1800 mV, enabled [ 0.862748] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.862758] pm8350_l2: unable to resolve supply [ 0.862763] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.862771] pm8350_l3: unable to resolve supply [ 0.862775] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.862783] pm8350_l5: unable to resolve supply [ 0.862788] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.862796] pm8350_l7: unable to resolve supply [ 0.862802] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l1-l12-supply from device tree [ 0.862809] pm8350c_l12: supplied by pm8350c_s1 [ 0.862834] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo12 regulator registered for RPMh resource ldoc12 @ 0x42800 [ 0.862901] pm8350c_l13: Setting 3000000-3000000uV [ 0.863107] pm8350c_l13: 3000 mV, enabled [ 0.863192] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.863203] pm8350_l2: unable to resolve supply [ 0.863208] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.863215] pm8350_l3: unable to resolve supply [ 0.863220] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 0.863228] pm8350_l5: unable to resolve supply [ 0.863232] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 0.863240] pm8350_l7: unable to resolve supply [ 0.863247] qcom-rpmh-regulator 18200000.rsc:regulators-1: Looking up vdd-l3-l4-l5-l7-l13-supply from device tree [ 0.863255] pm8350c_l13: supplied by vreg_bob [ 0.863283] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo13 regulator registered for RPMh resource ldoc13 @ 0x41700 [ 0.869187] gpi 800000.dma-controller: Adding to iommu group 0 [ 0.869691] gpi 800000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use [ 0.870427] gpi 9800000.dma-controller: Adding to iommu group 1 [ 0.870793] gpi 9800000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use [ 0.871365] gpi a00000.dma-controller: Adding to iommu group 2 [ 0.871766] gpi a00000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use [ 0.872452] i2c-gpio touchscreen_gpio_i2c: got GPIO from name sda [ 0.872474] i2c-gpio touchscreen_gpio_i2c: got GPIO from name scl [ 0.872834] i2c_dev: adapter [touchscreen_gpio_i2c] registered as minor 0 [ 0.872899] i2c i2c-0: adapter [touchscreen_gpio_i2c] registered [ 0.872911] i2c i2c-0: of_i2c: walking child nodes [ 0.872918] i2c i2c-0: of_i2c: register /touchscreen_gpio_i2c/focaltech@38 [ 0.873294] fts-i2c 0-0038: probe [ 0.873447] input: fts-i2c as /devices/platform/touchscreen_gpio_i2c/i2c-0/0-0038/input/input1 [ 0.873722] fts-i2c 0-0038: Looking up vdd-supply from device tree [ 0.873802] fts-i2c 0-0038: Looking up vcc-i2c-supply from device tree [ 1.017594] i2c i2c-0: client [ft3658u] registered with bus id 0-0038 [ 1.017613] i2c-gpio touchscreen_gpio_i2c: using lines 567 (SDA) and 568 (SCL) [ 1.017862] qcom-qmp-combo-phy 88e8000.phy: Looking up vdda-phy-supply from device tree [ 1.017930] qcom-qmp-combo-phy 88e8000.phy: Looking up vdda-pll-supply from device tree [ 1.018393] phy phy-88e8000.phy.0: Looking up phy-supply from device tree [ 1.018406] phy phy-88e8000.phy.0: Looking up phy-supply property in node /soc@0/phy@88e8000 failed [ 1.018495] phy phy-88e8000.phy.1: Looking up phy-supply from device tree [ 1.018506] phy phy-88e8000.phy.1: Looking up phy-supply property in node /soc@0/phy@88e8000 failed [ 1.018748] qcom-qmp-ufs-phy 1d87000.phy: Looking up vdda-phy-supply from device tree [ 1.018759] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 1.018768] pm8350_l5: supplied by vreg_bob [ 1.018853] qcom-qmp-ufs-phy 1d87000.phy: Looking up vdda-pll-supply from device tree [ 1.019336] phy phy-1d87000.phy.2: Looking up phy-supply from device tree [ 1.019344] phy phy-1d87000.phy.2: Looking up phy-supply property in node /soc@0/phy@1d87000/phy@1d87400 failed [ 1.019650] qcom-qmp-usb-phy 88eb000.phy-wrapper: Looking up vdda-phy-supply from device tree [ 1.019724] qcom-qmp-usb-phy 88eb000.phy-wrapper: Looking up vdda-pll-supply from device tree [ 1.019969] phy phy-88eb000.phy-wrapper.3: Looking up phy-supply from device tree [ 1.019976] phy phy-88eb000.phy-wrapper.3: Looking up phy-supply property in node /soc@0/phy-wrapper@88eb000/phy@88ebe00 failed [ 1.020302] qcom-snps-hs-femto-v2-phy 88e3000.phy: Looking up vdda-pll-supply from device tree [ 1.020382] qcom-snps-hs-femto-v2-phy 88e3000.phy: Looking up vdda33-supply from device tree [ 1.020392] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 1.020402] pm8350_l2: supplied by vreg_bob [ 1.020483] qcom-snps-hs-femto-v2-phy 88e3000.phy: Looking up vdda18-supply from device tree [ 1.020556] phy phy-88e3000.phy.4: Looking up phy-supply from device tree [ 1.020564] phy phy-88e3000.phy.4: Looking up phy-supply property in node /soc@0/phy@88e3000 failed [ 1.020854] qcom-snps-hs-femto-v2-phy 88e4000.phy: Looking up vdda-pll-supply from device tree [ 1.020922] qcom-snps-hs-femto-v2-phy 88e4000.phy: Looking up vdda33-supply from device tree [ 1.020991] qcom-snps-hs-femto-v2-phy 88e4000.phy: Looking up vdda18-supply from device tree [ 1.021058] phy phy-88e4000.phy.5: Looking up phy-supply from device tree [ 1.021065] phy phy-88e4000.phy.5: Looking up phy-supply property in node /soc@0/phy@88e4000 failed [ 1.021420] geni_se_qup 8c0000.geniqup: Adding to iommu group 3 [ 1.021889] geni_se_qup 9c0000.geniqup: Adding to iommu group 4 [ 1.022757] geni_i2c 980000.i2c: i2c fifo/se-dma mode. fifo depth:16 [ 1.022933] i2c_dev: adapter [Geni-I2C] registered as minor 1 [ 1.023012] i2c i2c-1: adapter [Geni-I2C] registered [ 1.023023] i2c i2c-1: of_i2c: walking child nodes [ 1.023028] i2c i2c-1: of_i2c: register /soc@0/geniqup@9c0000/i2c@980000/fuel-gauge@55 [ 1.023162] bq27xxx-battery 1-0055: probe [ 1.023497] bq27xxx-battery 1-0055: data memory update not supported for chip [ 1.023706] geni_i2c 980000.i2c: len:1, slv-addr:0x55, RD/WR:0 [ 1.023715] geni_i2c 980000.i2c: NACK: slv unresponsive, check its power/reset-ln [ 1.023797] i2c i2c-1: client [bq27541] registered with bus id 1-0055 [ 1.023812] geni_i2c 980000.i2c: Geni-I2C adaptor successfully added [ 1.024203] geni_se_qup ac0000.geniqup: Adding to iommu group 5 [ 1.037902] arm-smmu 3da0000.iommu: probing hardware configuration... [ 1.037917] arm-smmu 3da0000.iommu: SMMUv2 with: [ 1.037943] arm-smmu 3da0000.iommu: stage 1 translation [ 1.037950] arm-smmu 3da0000.iommu: coherent table walk [ 1.037956] arm-smmu 3da0000.iommu: stream matching with 6 register groups [ 1.037977] arm-smmu 3da0000.iommu: 7 context banks (0 stage-2 only) [ 1.037999] arm-smmu 3da0000.iommu: Supported page sizes: 0x61311000 [ 1.038006] arm-smmu 3da0000.iommu: Stage-1: 48-bit VA -> 36-bit IPA [ 1.038188] arm-smmu 3da0000.iommu: preserved 0 boot mappings [ 1.041484] adreno 3d00000.gpu: Adding to iommu group 6 [ 1.042993] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 7 [ 1.045338] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 1.045359] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled [ 1.045453] ufshcd-qcom 1d84000.ufshc: Looking up vcc-supply from device tree [ 1.045461] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l2-l7-supply from device tree [ 1.045469] pm8350_l7: supplied by vreg_bob [ 1.045558] ufshcd-qcom 1d84000.ufshc: Looking up vccq-supply from device tree [ 1.050485] scsi host0: ufshcd [ 1.058988] qcom_q6v5_pas 5c00000.remoteproc: Looking up cx-supply from device tree [ 1.058999] qcom_q6v5_pas 5c00000.remoteproc: Looking up cx-supply property in node /soc@0/remoteproc@5c00000 failed [ 1.059018] qcom_q6v5_pas 5c00000.remoteproc: Looking up px-supply from device tree [ 1.059026] qcom_q6v5_pas 5c00000.remoteproc: Looking up px-supply property in node /soc@0/remoteproc@5c00000 failed [ 1.061170] remoteproc remoteproc0: 5c00000.remoteproc is available [ 1.061915] qcom_q6v5_pas 17300000.remoteproc: Looking up cx-supply from device tree [ 1.061926] qcom_q6v5_pas 17300000.remoteproc: Looking up cx-supply property in node /soc@0/remoteproc@17300000 failed [ 1.061945] qcom_q6v5_pas 17300000.remoteproc: Looking up px-supply from device tree [ 1.061953] qcom_q6v5_pas 17300000.remoteproc: Looking up px-supply property in node /soc@0/remoteproc@17300000 failed [ 1.062158] remoteproc remoteproc0: Direct firmware load for qcom/sm8350/porsche/slpi.mbn failed with error -2 [ 1.062177] remoteproc remoteproc0: Falling back to sysfs fallback for: qcom/sm8350/porsche/slpi.mbn [ 1.063727] remoteproc remoteproc1: 17300000.remoteproc is available [ 1.063800] remoteproc remoteproc1: Direct firmware load for qcom/sm8350/porsche/adsp.mbn failed with error -2 [ 1.063816] remoteproc remoteproc1: Falling back to sysfs fallback for: qcom/sm8350/porsche/adsp.mbn [ 1.076914] msm-mdss ae00000.display-subsystem: Adding to iommu group 8 [ 1.077148] pmr735a_s1: Setting 1200000-1280000uV [ 1.077159] pm8350b_l1: Setting 1200000-1200000uV [ 1.077167] pmr735a_s1: 1200 <--> 1280 mV at 1200 mV, enabled [ 1.077220] qcom-rpmh-regulator 18200000.rsc:regulators-0: Looking up vdd-l3-l5-supply from device tree [ 1.077225] pm8350_l3: supplied by vreg_bob [ 1.077231] pm8350b_l1: 1200 mV normal idle, enabled [ 1.077235] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-s1-supply from device tree [ 1.077238] pmr735a_s1: supplied by vph_pwr [ 1.077246] qcom-rpmh-regulator 18200000.rsc:regulators-3: smps1 regulator registered for RPMh resource smpe1 @ 0x40400 [ 1.077258] pmr735a_s2: Setting 500000-976000uV [ 1.077264] pmr735a_s2: 500 <--> 976 mV at 500 mV, enabled [ 1.077300] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-s2-supply from device tree [ 1.077302] pmr735a_s2: supplied by vph_pwr [ 1.077310] qcom-rpmh-regulator 18200000.rsc:regulators-3: smps2 regulator registered for RPMh resource smpe2 @ 0x40500 [ 1.077320] pmr735a_s3: Setting 2208000-2352000uV [ 1.077326] pmr735a_s3: 2208 <--> 2352 mV at 2208 mV, enabled [ 1.077343] qcom-rpmh-regulator 18200000.rsc:regulators-2: Looking up vdd-l1-supply from device tree [ 1.077356] qcom-rpmh-regulator 18200000.rsc:regulators-2: Looking up vdd-l1-supply from device tree [ 1.077355] pm8350b_l1: supplied by pm8350_s12 [ 1.077390] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-s3-supply from device tree [ 1.077392] pmr735a_s3: supplied by vph_pwr [ 1.077391] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-s3-supply from device tree [ 1.077399] qcom-rpmh-regulator 18200000.rsc:regulators-3: smps3 regulator registered for RPMh resource smpe3 @ 0x42C00 [ 1.077402] qcom-rpmh-regulator 18200000.rsc:regulators-2: ldo1 regulator registered for RPMh resource ldod1 @ 0x41C00 [ 1.077410] pmr735a_l1: Setting 912000-912000uV [ 1.077414] pmr735a_l1: 912 mV, enabled [ 1.077436] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-l1-l2-supply from device tree [ 1.077452] pmr735a_l1: supplied by pmr735a_s2 [ 1.077459] qcom-rpmh-regulator 18200000.rsc:regulators-3: ldo1 regulator registered for RPMh resource ldoe1 @ 0x42D00 [ 1.077469] pmr735a_l2: Setting 1200000-1200000uV [ 1.077473] pmr735a_l2: 1200 mV, enabled [ 1.077494] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-l1-l2-supply from device tree [ 1.077498] pmr735a_l2: supplied by pmr735a_s2 [ 1.077504] qcom-rpmh-regulator 18200000.rsc:regulators-3: ldo2 regulator registered for RPMh resource ldoe2 @ 0x42E00 [ 1.077514] pmr735a_l3: Setting 1200000-1200000uV [ 1.077518] pmr735a_l3: 1200 mV, enabled [ 1.077542] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-l3-supply from device tree [ 1.077545] pmr735a_l3: supplied by pmr735a_s1 [ 1.077552] qcom-rpmh-regulator 18200000.rsc:regulators-3: ldo3 regulator registered for RPMh resource ldoe3 @ 0x42F00 [ 1.077562] pmr735a_l4: Setting 1776000-1872000uV [ 1.077565] pmr735a_l4: 1776 <--> 1872 mV at 1776 mV, enabled [ 1.077586] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-l4-supply from device tree [ 1.077588] pmr735a_l4: supplied by pm8350c_s1 [ 1.077596] qcom-rpmh-regulator 18200000.rsc:regulators-3: ldo4 regulator registered for RPMh resource ldoe4 @ 0x42900 [ 1.077605] pmr735a_l5: Setting 800000-800000uV [ 1.077608] pmr735a_l5: 800 mV, enabled [ 1.077627] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-l5-l6-supply from device tree [ 1.077629] pmr735a_l5: supplied by pm8350c_s1 [ 1.077636] qcom-rpmh-regulator 18200000.rsc:regulators-3: ldo5 regulator registered for RPMh resource ldoe5 @ 0x43600 [ 1.077645] pmr735a_l6: Setting 480000-904000uV [ 1.077649] pmr735a_l6: 480 <--> 904 mV at 480 mV, enabled [ 1.077673] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-l5-l6-supply from device tree [ 1.077675] pmr735a_l6: supplied by pm8350c_s1 [ 1.077682] qcom-rpmh-regulator 18200000.rsc:regulators-3: ldo6 regulator registered for RPMh resource ldoe6 @ 0x43700 [ 1.077692] pmr735a_l7: Setting 2800000-2800000uV [ 1.077696] pmr735a_l7: 2800 mV, enabled [ 1.077715] qcom-rpmh-regulator 18200000.rsc:regulators-3: Looking up vdd-l7-bob-supply from device tree [ 1.077717] pmr735a_l7: supplied by vreg_bob [ 1.077725] qcom-rpmh-regulator 18200000.rsc:regulators-3: ldo7 regulator registered for RPMh resource ldoe7 @ 0x41800 [ 1.108013] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0/port/endpoint [ 1.108055] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000/ports/port@0/endpoint [ 1.111741] msm_dsi_phy ae94400.phy: Looking up vdds-supply from device tree [ 1.112641] ipa 1e40000.ipa: Adding to iommu group 9 [ 1.116618] ipa 1e40000.ipa: IPA driver initialized [ 1.116682] ipa 1e40000.ipa: Direct firmware load for qcom/sm8350/porsche/ipa_fws.mbn failed with error -2 [ 1.116695] ipa 1e40000.ipa: Falling back to sysfs fallback for: qcom/sm8350/porsche/ipa_fws.mbn [ 1.288029] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUDG4UHDC-B0E1 0700 PQ: 0 ANSI: 6 [ 1.292500] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUDG4UHDC-B0E1 0700 PQ: 0 ANSI: 6 [ 1.295957] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUDG4UHDC-B0E1 0700 PQ: 0 ANSI: 6 [ 1.300660] scsi 0:0:0:0: Direct-Access SAMSUNG KLUDG4UHDC-B0E1 0700 PQ: 0 ANSI: 6 [ 1.304513] scsi 0:0:0:1: Direct-Access SAMSUNG KLUDG4UHDC-B0E1 0700 PQ: 0 ANSI: 6 [ 1.305199] sd 0:0:0:0: [sda] 30402560 4096-byte logical blocks: (125 GB/116 GiB) [ 1.305414] sd 0:0:0:0: [sda] Write Protect is off [ 1.305427] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10 [ 1.305693] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.305711] sd 0:0:0:0: [sda] Preferred minimum I/O size 524288 bytes [ 1.305721] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 1.305896] scsi 0:0:0:2: Direct-Access SAMSUNG KLUDG4UHDC-B0E1 0700 PQ: 0 ANSI: 6 [ 1.307403] scsi 0:0:0:3: Direct-Access SAMSUNG KLUDG4UHDC-B0E1 0700 PQ: 0 ANSI: 6 [ 1.308137] sd 0:0:0:1: [sdb] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB) [ 1.308490] sd 0:0:0:1: [sdb] Write Protect is off [ 1.308509] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10 [ 1.309209] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB) [ 1.309507] scsi 0:0:0:4: Direct-Access SAMSUNG KLUDG4UHDC-B0E1 0700 PQ: 0 ANSI: 6 [ 1.309541] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 1.309572] sd 0:0:0:2: [sdc] Write Protect is off [ 1.309579] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10 [ 1.309600] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.309606] sd 0:0:0:1: [sdb] Preferred minimum I/O size 524288 bytes [ 1.309609] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes [ 1.309948] sd 0:0:0:3: [sdd] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB) [ 1.310097] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.310104] sd 0:0:0:2: [sdc] Preferred minimum I/O size 524288 bytes [ 1.310107] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes [ 1.310208] sd 0:0:0:3: [sdd] Write Protect is off [ 1.310223] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10 [ 1.310543] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.310560] sd 0:0:0:3: [sdd] Preferred minimum I/O size 524288 bytes [ 1.310570] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes [ 1.312928] sd 0:0:0:4: [sde] 674816 4096-byte logical blocks: (2.76 GB/2.57 GiB) [ 1.313211] sd 0:0:0:4: [sde] Write Protect is off [ 1.313224] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10 [ 1.313379] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.313396] sd 0:0:0:4: [sde] Preferred minimum I/O size 524288 bytes [ 1.313406] sd 0:0:0:4: [sde] Optimal transfer size 524288 bytes [ 1.313513] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.313701] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 [ 1.313755] scsi 0:0:0:5: Direct-Access SAMSUNG KLUDG4UHDC-B0E1 0700 PQ: 0 ANSI: 6 [ 1.314689] sdc: sdc1 sdc2 [ 1.314848] sdb: sdb1 sdb2 [ 1.315039] sd 0:0:0:1: [sdb] Attached SCSI disk [ 1.315443] sd 0:0:0:2: [sdc] Attached SCSI disk [ 1.315534] sd 0:0:0:3: [sdd] Attached SCSI disk [ 1.315951] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67 sde68 sde69 sde70 sde71 [ 1.316161] sd 0:0:0:5: [sdf] 148480 4096-byte logical blocks: (608 MB/580 MiB) [ 1.316205] sd 0:0:0:5: [sdf] Write Protect is off [ 1.316208] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10 [ 1.316285] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.316288] sd 0:0:0:5: [sdf] Preferred minimum I/O size 524288 bytes [ 1.316290] sd 0:0:0:5: [sdf] Optimal transfer size 524288 bytes [ 1.317532] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9 sdf10 sdf11 sdf12 sdf13 sdf14 sdf15 sdf16 sdf17 sdf18 sdf19 [ 1.320048] sd 0:0:0:5: [sdf] Attached SCSI disk [ 1.323293] sd 0:0:0:4: [sde] Attached SCSI disk [ 62.433332] ipa 1e40000.ipa: error -110 requesting "qcom/sm8350/porsche/ipa_fws.mbn" [ 62.433544] remoteproc remoteproc1: powering up 17300000.remoteproc [ 62.433677] remoteproc remoteproc1: Direct firmware load for qcom/sm8350/porsche/adsp.mbn failed with error -2 [ 62.433721] remoteproc remoteproc1: Falling back to sysfs fallback for: qcom/sm8350/porsche/adsp.mbn [ 62.433990] remoteproc remoteproc0: powering up 5c00000.remoteproc [ 62.434101] remoteproc remoteproc0: Direct firmware load for qcom/sm8350/porsche/slpi.mbn failed with error -2 [ 62.434144] remoteproc remoteproc0: Falling back to sysfs fallback for: qcom/sm8350/porsche/slpi.mbn [ 62.435164] ipa: probe of 1e40000.ipa failed with error -110 [ 62.445032] dwc3 a600000.usb: Adding to iommu group 10 [ 62.445856] dwc3 a600000.usb: Configuration mismatch. dr_mode forced to gadget [ 62.512650] g_ether gadget.0: HOST MAC 6e:84:97:cb:81:09 [ 62.512712] g_ether gadget.0: MAC fe:be:7e:af:65:5c [ 62.513078] g_ether gadget.0: Ethernet Gadget, version: Memorial Day 2008 [ 62.513139] g_ether gadget.0: g_ether ready [ 62.588684] dwc3 a800000.usb: Adding to iommu group 11 [ 62.589322] dwc3 a800000.usb: Configuration mismatch. dr_mode forced to gadget [ 62.659526] Mass Storage Function, version: 2009/09/11 [ 62.659576] LUN: removable file: (no medium) [ 62.659650] no file given for LUN0 [ 62.659719] udc a800000.usb: failed to start g_mass_storage: -22 [ 62.659771] g_mass_storage: probe of gadget.1 failed with error -22 [ 62.660935] g_serial gadget.1: Gadget Serial v2.4 [ 62.660990] g_serial gadget.1: g_serial ready [ 62.731045] qcom_q6v5_pas 4080000.remoteproc: Looking up cx-supply from device tree [ 62.731060] qcom_q6v5_pas 4080000.remoteproc: Looking up cx-supply property in node /soc@0/remoteproc@4080000 failed [ 62.731109] qcom_q6v5_pas 4080000.remoteproc: Looking up px-supply from device tree [ 62.731120] qcom_q6v5_pas 4080000.remoteproc: Looking up px-supply property in node /soc@0/remoteproc@4080000 failed [ 62.734221] remoteproc remoteproc2: 4080000.remoteproc is available [ 62.737704] qcom_q6v5_pas 98900000.remoteproc: Looking up cx-supply from device tree [ 62.737767] qcom_q6v5_pas 98900000.remoteproc: Looking up cx-supply property in node /soc@0/remoteproc@98900000 failed [ 62.737853] qcom_q6v5_pas 98900000.remoteproc: Looking up px-supply from device tree [ 62.737902] qcom_q6v5_pas 98900000.remoteproc: Looking up px-supply property in node /soc@0/remoteproc@98900000 failed [ 62.740603] remoteproc remoteproc3: 98900000.remoteproc is available [ 62.741034] remoteproc remoteproc3: Direct firmware load for qcom/sm8350/porsche/cdsp.mbn failed with error -2 [ 62.741115] remoteproc remoteproc3: Falling back to sysfs fallback for: qcom/sm8350/porsche/cdsp.mbn [ 62.747762] msm_dsi ae94000.dsi: Looking up vdda-supply from device tree [ 62.749794] mipi-dsi ae94000.dsi.0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/ports/port@1/endpoint [ 62.750648] panel-samsung-ams662zs01 ae94000.dsi.0: Looking up vddio-supply from device tree [ 62.751840] msm_dpu ae01000.display-controller: bound ae94000.dsi (ops dsi_ops) [ 62.754250] adreno 3d00000.gpu: Looking up vdd-supply from device tree [ 62.754266] adreno 3d00000.gpu: Looking up vdd-supply property in node /soc@0/gpu@3d00000 failed [ 62.754288] adreno 3d00000.gpu: supply vdd not found, using dummy regulator [ 62.754377] adreno 3d00000.gpu: Looking up vddcx-supply from device tree [ 62.754393] adreno 3d00000.gpu: Looking up vddcx-supply property in node /soc@0/gpu@3d00000 failed [ 62.754413] adreno 3d00000.gpu: supply vddcx not found, using dummy regulator [ 62.754559] adreno 3d00000.gpu: [drm:msm_devfreq_init] *ERROR* Couldn't register GPU cooling device [ 62.756315] platform 3d6a000.gmu: Adding to iommu group 12 [ 62.804851] msm_dpu ae01000.display-controller: bound 3d00000.gpu (ops a3xx_ops) [ 62.808967] [drm:dpu_kms_hw_init:1068] dpu hardware revision:0x70000000 [ 62.814080] [drm] Initialized msm 1.10.0 20130625 for ae01000.display-controller on minor 0 [ 62.815346] msm_dpu ae01000.display-controller: Direct firmware load for qcom/a660_sqe.fw failed with error -2 [ 62.815433] msm_dpu ae01000.display-controller: Falling back to sysfs fallback for: qcom/a660_sqe.fw [ 123.873287] remoteproc remoteproc0: request_firmware failed: -110 [ 123.873412] remoteproc remoteproc3: powering up 98900000.remoteproc [ 123.873498] remoteproc remoteproc1: request_firmware failed: -110 [ 123.873498] remoteproc remoteproc3: Direct firmware load for qcom/sm8350/porsche/cdsp.mbn failed with error -2 [ 123.873510] remoteproc remoteproc3: Falling back to sysfs fallback for: qcom/sm8350/porsche/cdsp.mbn [ 123.873610] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] *ERROR* failed to load a660_sqe.fw [ 124.216327] Console: switching to colour frame buffer device 135x150 [ 124.300612] msm_dpu ae01000.display-controller: [drm] fb0: msmdrmfb frame buffer device [ 124.302542] input: gpio-keys as /devices/platform/gpio_keys/input/input2 [ 124.303198] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 124.304890] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 124.304993] clk: Not disabling unused clocks [ 124.305125] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 124.305207] ALSA device list: [ 124.305209] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 124.305326] No soundcards found. [ 124.306648] Freeing unused kernel memory: 4992K [ 124.321068] Run /init as init process [ 124.321248] with arguments: [ 124.321265] /init [ 124.321281] with environment: [ 124.321294] HOME=/ [ 124.321309] TERM=linux [ 124.321324] lk_version=V1.0 [ 124.321338] short_c_feature_sw_status=0 [ 124.321353] smooth_soc_switch=0 [ 127.677550] UDC core: g1: couldn't find an available UDC or it's busy [ 129.247773] EXT4-fs (dm-0): mounted filesystem fcf0f199-abd6-492a-8fb1-c2ff4dac1d77 ro without journal. Quota mode: none. [ 134.856691] EXT4-fs (dm-1): orphan cleanup on readonly fs [ 134.856938] EXT4-fs (dm-1): mounted filesystem 4fc5b9af-7815-4fa9-9806-221439fd6545 ro with ordered data mode. Quota mode: none. [ 134.859287] EXT4-fs (dm-0): unmounting filesystem fcf0f199-abd6-492a-8fb1-c2ff4dac1d77. [ 135.714742] EXT4-fs (dm-0): mounted filesystem fcf0f199-abd6-492a-8fb1-c2ff4dac1d77 r/w without journal. Quota mode: none. [ 147.131169] udevd[947]: starting version 3.2.12 [ 147.160320] udevd[947]: starting eudev-3.2.12 [ 147.471028] geni_i2c 980000.i2c: len:1, slv-addr:0x55, RD/WR:0 [ 147.471039] geni_i2c 980000.i2c: NACK: slv unresponsive, check its power/reset-ln [ 148.032039] NET: Registered PF_INET6 protocol family [ 148.032407] Segment Routing with IPv6 [ 148.032412] In-situ OAM (IOAM) with IPv6 [ 148.244998] EXT4-fs (dm-1): re-mounted 4fc5b9af-7815-4fa9-9806-221439fd6545 r/w. Quota mode: none. [ 153.461114] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a660_sqe.fw from new location [ 153.462139] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a660_gmu.bin from new location [ 154.891178] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1939 'mate-session-ch' [ 156.060337] geni_i2c 980000.i2c: len:1, slv-addr:0x55, RD/WR:0 [ 156.060360] geni_i2c 980000.i2c: NACK: slv unresponsive, check its power/reset-ln [ 172.875211] dwc3 a600000.usb: remote wakeup not configured [ 185.314456] cfg80211: failed to load regulatory.db [ 185.314827] remoteproc remoteproc3: request_firmware failed: -110 [ 529.378821] geni_i2c 980000.i2c: len:1, slv-addr:0x55, RD/WR:0 [ 529.378843] geni_i2c 980000.i2c: NACK: slv unresponsive, check its power/reset-ln