here's the output from the laptop without the issue:
[ 1015.334871] wlan0: deauthenticating from f0:2f:74:5d:73:04 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1020.364644] ath11k_pci 0006:01:00.0: BAR 0: assigned [mem 0x30400000-0x305fffff 64bit]
[ 1020.365484] ath11k_pci 0006:01:00.0: MSI vectors: 32
[ 1020.365521] ath11k_pci 0006:01:00.0: wcn6855 hw2.1
[ 1020.525826] mhi mhi0: Requested to power ON
[ 1020.525844] mhi mhi0: Power on setup success
[ 1020.635899] mhi mhi0: Wait for device to enter SBL or Mission mode
[ 1021.274439] ath11k_pci 0006:01:00.0: chip_id 0x2 chip_family 0xb board_id 0x8c soc_id 0x400c0210
[ 1021.274483] ath11k_pci 0006:01:00.0: fw_version 0x110b196e fw_build_timestamp 2022-12-22 12:54 fw_build_id WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
[ 1028.912098] wlan0: authenticate with f0:2f:74:5d:73:04
[ 1029.120891] wlan0: send auth to f0:2f:74:5d:73:04 (try 1/3)
[ 1029.125347] wlan0: authenticated
[ 1029.127318] wlan0: associate with f0:2f:74:5d:73:04 (try 1/3)
[ 1029.130198] wlan0: RX AssocResp from f0:2f:74:5d:73:04 (capab=0x1011 status=0 aid=17)
[ 1029.146251] wlan0: associated
[ 1029.206535] wlan0: Limiting TX power to 24 (24 - 0) dBm as advertised by f0:2f:74:5d:73:0

the only difference i see with that and my modem is the number after mhi (mhi0 vs mhi1) in the power on request part