[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd4b0] [ 0.000000] Linux version 6.7.2+ (daniel@daniel-X13s) (gcc (Ubuntu 13.2.0-4ubuntu3) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.41) #2 SMP PREEMPT Sun Jan 28 03:14:05 PST 2024 [ 0.000000] KASLR enabled [ 0.000000] Machine model: Lenovo ThinkPad X13s [ 0.000000] efi: EFI v2.7 by Lenovo [ 0.000000] efi: RTPROP=0xffe89398 ACPI 2.0=0xffffd000 MEMATTR=0xfb046018 ESRT=0xfaef0298 SMBIOS=0xffed1000 MOKvar=0xff71f000 TPMEventLog=0xeb2aa018 INITRD=0xef96b818 RNG=0xffffb018 MEMRESERVE=0xef96b918 [ 0.000000] random: crng init done [ 0.000000] TPM Final Events table not present [ 0.000000] esrt: Reserving ESRT space from 0x00000000faef0298 to 0x00000000faef0348. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000c78000000, size 128 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000c78000000..0x0000000c7fffffff (131072 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x0000000080000000..0x000000008085ffff (8576 KiB) nomap non-reusable reserved-region@80000000 [ 0.000000] OF: reserved mem: 0x0000000080860000..0x000000008087ffff (128 KiB) nomap non-reusable cmd-db-region@80860000 [ 0.000000] OF: reserved mem: 0x0000000080880000..0x00000000808fffff (512 KiB) nomap non-reusable reserved-region@80880000 [ 0.000000] OF: reserved mem: 0x0000000080900000..0x0000000080afffff (2048 KiB) nomap non-reusable smem-region@80900000 [ 0.000000] OF: reserved mem: 0x0000000080b00000..0x0000000080bfffff (1024 KiB) nomap non-reusable reserved-region@80b00000 [ 0.000000] OF: reserved mem: 0x0000000083b00000..0x00000000851fffff (23552 KiB) nomap non-reusable reserved-region@83b00000 [ 0.000000] OF: reserved mem: 0x0000000085b00000..0x00000000866fffff (12288 KiB) nomap non-reusable reserved-region@85b00000 [ 0.000000] OF: reserved mem: 0x0000000086700000..0x0000000086bfffff (5120 KiB) nomap non-reusable pil_video_region@86700000 [ 0.000000] OF: reserved mem: 0x0000000086c00000..0x0000000088bfffff (32768 KiB) nomap non-reusable adsp-region@86c00000 [ 0.000000] OF: reserved mem: 0x000000008a100000..0x000000008befffff (30720 KiB) nomap non-reusable cdsp0-region@8a100000 [ 0.000000] OF: reserved mem: 0x000000008bf00000..0x000000008bf01fff (8 KiB) nomap non-reusable gpu-mem@8bf00000 [ 0.000000] OF: reserved mem: 0x000000008c600000..0x000000008e3fffff (30720 KiB) nomap non-reusable cdsp1-region@8c600000 [ 0.000000] OF: reserved mem: 0x00000000aeb00000..0x00000000c50fffff (366592 KiB) nomap non-reusable reserved-region@aeb00000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080600000-0x0000000c7fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xc740698c0-0xc7406bfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080600000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000c7fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080600000-0x00000000806fffff] [ 0.000000] node 0: [mem 0x0000000080880000-0x00000000808affff] [ 0.000000] node 0: [mem 0x00000000808c0000-0x00000000808effff] [ 0.000000] node 0: [mem 0x0000000080c00000-0x00000000826fffff] [ 0.000000] node 0: [mem 0x000000008e400000-0x000000009f5cffff] [ 0.000000] node 0: [mem 0x000000009f5f7000-0x000000009f5fffff] [ 0.000000] node 0: [mem 0x000000009f600000-0x00000000ae9fffff] [ 0.000000] node 0: [mem 0x00000000aea00000-0x00000000bfffffff] [ 0.000000] node 0: [mem 0x00000000c6200000-0x00000000c85fffff] [ 0.000000] node 0: [mem 0x00000000c8600000-0x00000000ff36dfff] [ 0.000000] node 0: [mem 0x00000000ff36e000-0x00000000fff21fff] [ 0.000000] node 0: [mem 0x00000000fff22000-0x00000003ffffffff] [ 0.000000] node 0: [mem 0x0000000800000000-0x0000000c7fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080600000-0x0000000c7fffffff] [ 0.000000] On node 0, zone DMA: 1536 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 384 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 16 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 784 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 48384 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 39 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 25088 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] psci: OSI mode supported. [ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -3 [ 0.000000] percpu: Embedded 31 pages/cpu s89128 r8192 d29656 u126976 [ 0.000000] pcpu-alloc: s89128 r8192 d29656 u126976 alloc=31*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: SYS_ID_AA64ISAR1_EL1[31:28]: already set to 0 [ 0.000000] CPU features: SYS_ID_AA64ISAR1_EL1[27:24]: forced to 0 [ 0.000000] CPU features: SYS_ID_AA64ISAR1_EL1[11:8]: already set to 0 [ 0.000000] CPU features: SYS_ID_AA64ISAR1_EL1[7:4]: forced to 0 [ 0.000000] CPU features: SYS_ID_AA64ISAR2_EL1[15:12]: already set to 0 [ 0.000000] CPU features: SYS_ID_AA64ISAR2_EL1[11:8]: already set to 0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.7.2+ root=UUID=cfc4d43f-a7ea-4bde-a124-1506447ea792 ro quiet splash clk_ignore_unused pd_ignore_unused vt.handoff=7 [ 0.000000] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.7.2+", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8182496 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000fb36e000-0x00000000ff36e000] (64MB) [ 0.000000] Memory: 1473200K/33249508K available (14208K kernel code, 3328K rwdata, 6628K rodata, 7488K init, 599K bss, 1122944K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 47145 entries in 185 pages [ 0.000000] ftrace: allocated 185 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000 [ 0.000000] ITS [mem 0x17a40000-0x17a5ffff] [ 0.000000] ITS@0x0000000017a40000: allocated 8192 Devices @1001d0000 (indirect, esz 8, psz 64K, shr 1) [ 0.000000] ITS@0x0000000017a40000: allocated 32768 Interrupt Collections @1001e0000 (flat, esz 2, psz 64K, shr 1) [ 0.000000] GICv3: using LPI property table @0x00000001001f0000 [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100200000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000098] Console: colour dummy device 80x25 [ 0.000102] printk: legacy console [tty0] enabled [ 0.000163] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.000168] pid_max: default: 32768 minimum: 301 [ 0.000225] LSM: initializing lsm=capability,yama,apparmor,tomoyo,integrity [ 0.000246] Yama: becoming mindful. [ 0.000272] AppArmor: AppArmor initialized [ 0.000276] TOMOYO Linux initialized [ 0.000335] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000366] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001017] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.001039] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.001061] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.001120] rcu: Hierarchical SRCU implementation. [ 0.001122] rcu: Max phase no-delay instances is 1000. [ 0.001469] Platform MSI: msi-controller@17a40000 domain created [ 0.001533] PCI/MSI: /soc@0/interrupt-controller@17a00000/msi-controller@17a40000 domain created [ 0.002162] Remapping and enabling EFI services. [ 0.002563] smp: Bringing up secondary CPUs ... [ 0.003038] Detected PIPT I-cache on CPU1 [ 0.003074] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000 [ 0.003083] GICv3: CPU1: using allocated LPI pending table @0x0000000100210000 [ 0.003105] CPU1: Booted secondary processor 0x0000000100 [0x410fd4b0] [ 0.003652] Detected PIPT I-cache on CPU2 [ 0.003681] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000 [ 0.003691] GICv3: CPU2: using allocated LPI pending table @0x0000000100220000 [ 0.003714] CPU2: Booted secondary processor 0x0000000200 [0x410fd4b0] [ 0.004259] Detected PIPT I-cache on CPU3 [ 0.004285] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000 [ 0.004294] GICv3: CPU3: using allocated LPI pending table @0x0000000100230000 [ 0.004315] CPU3: Booted secondary processor 0x0000000300 [0x410fd4b0] [ 0.006889] Detected PIPT I-cache on CPU4 [ 0.006930] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000 [ 0.006941] GICv3: CPU4: using allocated LPI pending table @0x0000000100240000 [ 0.006968] CPU4: Booted secondary processor 0x0000000400 [0x410fd4c0] [ 0.007587] Detected PIPT I-cache on CPU5 [ 0.007631] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000 [ 0.007642] GICv3: CPU5: using allocated LPI pending table @0x0000000100250000 [ 0.007668] CPU5: Booted secondary processor 0x0000000500 [0x410fd4c0] [ 0.008316] Detected PIPT I-cache on CPU6 [ 0.008359] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000 [ 0.008371] GICv3: CPU6: using allocated LPI pending table @0x0000000100260000 [ 0.008397] CPU6: Booted secondary processor 0x0000000600 [0x410fd4c0] [ 0.009088] Detected PIPT I-cache on CPU7 [ 0.009133] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000 [ 0.009144] GICv3: CPU7: using allocated LPI pending table @0x0000000100270000 [ 0.009171] CPU7: Booted secondary processor 0x0000000700 [0x410fd4c0] [ 0.009264] smp: Brought up 1 node, 8 CPUs [ 0.009271] SMP: Total of 8 processors activated. [ 0.009274] CPU features: detected: 32-bit EL0 Support [ 0.009275] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.009277] CPU features: detected: Common not Private translations [ 0.009279] CPU features: detected: CRC32 instructions [ 0.009280] CPU features: detected: Data cache clean to Point of Persistence [ 0.009283] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.009284] CPU features: detected: LSE atomic instructions [ 0.009286] CPU features: detected: Privileged Access Never [ 0.009287] CPU features: detected: RAS Extension Support [ 0.009289] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.009347] CPU features: detected: Hardware dirty bit management on CPU0-7 [ 0.009350] CPU: All CPU(s) started at EL1 [ 0.009356] alternatives: applying system-wide alternatives [ 0.108710] node 0 deferred pages initialised in 100ms [ 0.109118] devtmpfs: initialized [ 0.117797] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.117813] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.118387] pinctrl core: initialized pinctrl subsystem [ 0.118624] SMBIOS 3.3 present. [ 0.118630] DMI: LENOVO 21BX0016US/21BX0016US, BIOS N3HET87W (1.59 ) 12/05/2023 [ 0.118963] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.119696] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.120112] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.120513] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.120534] audit: initializing netlink subsys (disabled) [ 0.120593] audit: type=2000 audit(0.120:1): state=initialized audit_enabled=0 res=1 [ 0.121050] thermal_sys: Registered thermal governor 'fair_share' [ 0.121053] thermal_sys: Registered thermal governor 'step_wise' [ 0.121055] thermal_sys: Registered thermal governor 'power_allocator' [ 0.121078] cpuidle: using governor ladder [ 0.121085] cpuidle: using governor menu [ 0.121151] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.121241] ASID allocator initialised with 32768 entries [ 0.121381] Serial: AMBA PL011 UART driver [ 0.130590] platform ae00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000 [ 0.130724] platform aec5a00.phy: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000 [ 0.133385] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.133388] Modules: 0 pages in range for non-PLT usage [ 0.133389] Modules: 516176 pages in range for PLT usage [ 0.133671] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.133675] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.133678] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.133679] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.133681] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.133682] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.133683] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.133684] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.134282] ACPI: Interpreter disabled. [ 0.134885] iommu: Default domain type: Translated [ 0.134888] iommu: DMA domain TLB invalidation policy: strict mode [ 0.139364] SCSI subsystem initialized [ 0.139398] usbcore: registered new interface driver usbfs [ 0.139410] usbcore: registered new interface driver hub [ 0.139422] usbcore: registered new device driver usb [ 0.139458] pps_core: LinuxPPS API ver. 1 registered [ 0.139460] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.139464] PTP clock support registered [ 0.139475] EDAC MC: Ver: 3.0.0 [ 0.139643] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode [ 0.139744] scmi_core: SCMI protocol bus registered [ 0.140206] NetLabel: Initializing [ 0.140208] NetLabel: domain hash size = 128 [ 0.140210] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.140229] NetLabel: unlabeled traffic allowed by default [ 0.140293] vgaarb: loaded [ 0.140525] clocksource: Switched to clocksource arch_sys_counter [ 0.140657] VFS: Disk quotas dquot_6.6.0 [ 0.140672] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.140884] AppArmor: AppArmor Filesystem Enabled [ 0.140900] pnp: PnP ACPI: disabled [ 0.142934] NET: Registered PF_INET protocol family [ 0.143084] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.147421] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.147521] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.147634] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.148022] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.149073] TCP: Hash tables configured (established 262144 bind 65536) [ 0.149141] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.149235] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.149358] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.149374] NET: Registered PF_XDP protocol family [ 0.149379] PCI: CLS 0 bytes, default 64 [ 0.149467] Trying to unpack rootfs image as initramfs... [ 0.149555] kvm [1]: HYP mode not available [ 0.150008] Initialise system trusted keyrings [ 0.150022] Key type blacklist registered [ 0.150067] workingset: timestamp_bits=42 max_order=23 bucket_order=0 [ 0.150256] integrity: Platform Keyring initialized [ 0.166244] Key type asymmetric registered [ 0.166247] Asymmetric key parser 'x509' registered [ 0.601825] Freeing initrd memory: 48532K [ 0.608337] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.608385] io scheduler mq-deadline registered [ 0.614762] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.615315] efifb: probing for efifb [ 0.615334] efifb: framebuffer at 0xc6200000, using 9000k, total 9000k [ 0.615337] efifb: mode is 1920x1200x32, linelength=7680, pages=1 [ 0.615339] efifb: scrolling: redraw [ 0.615340] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.615497] Console: switching to colour frame buffer device 240x75 [ 0.617688] fb0: EFI VGA frame buffer device [ 0.620990] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.621670] Serial: AMBA driver [ 0.621829] msm_serial: driver initialized [ 0.623210] spmi spmi-0: PMIC arbiter version v5 (0x50020000) [ 0.630925] usbcore: registered new interface driver usb-storage [ 0.630951] usbcore: registered new interface driver usbserial_generic [ 0.630958] usbserial: USB Serial support registered for generic [ 0.631080] mousedev: PS/2 mouse device common for all mice [ 0.635387] ledtrig-cpu: registered to indicate activity on CPUs [ 0.635970] hid: raw HID events driver (C) Jiri Kosina [ 0.635995] usbcore: registered new interface driver usbhid [ 0.635998] usbhid: USB HID core driver [ 0.638404] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.638654] watchdog: Delayed init of the lockup detector failed: -19 [ 0.638656] watchdog: Hard watchdog permanently disabled [ 0.639394] NET: Registered PF_INET6 protocol family [ 0.645443] Segment Routing with IPv6 [ 0.645457] In-situ OAM (IOAM) with IPv6 [ 0.645480] mip6: Mobile IPv6 [ 0.645486] NET: Registered PF_PACKET protocol family [ 0.645942] mpls_gso: MPLS GSO support [ 0.648008] registered taskstats version 1 [ 0.648143] Loading compiled-in X.509 certificates [ 0.650964] Key type .fscrypt registered [ 0.650967] Key type fscrypt-provisioning registered [ 0.651031] AppArmor: AppArmor sha1 policy hashing enabled [ 0.921167] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps11 [ 0.921186] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps12 [ 0.921458] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps11 [ 0.921465] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/bob [ 0.921471] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/smps1 [ 0.922195] vreg_s10b: Setting 1800000-1800000uV [ 0.922301] vreg_s1c: Setting 1880000-1900000uV [ 0.922776] vreg_s11b: Setting 1272000-1272000uV [ 0.923592] vreg_l1c: Setting 1800000-1800000uV [ 0.923597] vreg_s12b: Setting 984000-984000uV [ 0.924342] vreg_l8c: Setting 1800000-1800000uV [ 0.924652] vreg_l1b: Setting 912000-912000uV [ 0.924933] vreg_l12c: Setting 1800000-1800000uV [ 0.924991] vreg_l3b: Setting 1200000-1200000uV [ 0.925532] vreg_l13c: Setting 3072000-3072000uV [ 0.925803] vreg_l4b: Setting 912000-912000uV [ 0.926089] vreg_bob: Setting 3008000-3960000uV [ 0.926092] vreg_l6b: Setting 880000-880000uV [ 1.028095] qcom_scm: convention: smc arm 64 [ 1.028203] qcom_scm firmware:scm: qseecom: found qseecom with version 0x1402000 [ 1.028352] qcom_qseecom qcom_qseecom: setting up client for qcom.tz.uefisecapp [ 1.028379] vreg_l2d: Setting 3072000-3072000uV [ 1.028683] efivars: Registered efivars operations [ 1.028711] vreg_l3d: Setting 1200000-1200000uV [ 1.028957] vreg_l4d: Setting 1200000-1200000uV [ 1.029314] vreg_l6d: Setting 880000-880000uV [ 1.029706] vreg_l7d: Setting 3072000-3072000uV [ 1.029931] vreg_l8d: Setting 912000-912000uV [ 1.029996] vreg_l9d: Setting 912000-912000uV [ 1.030354] vreg_l10d: Setting 912000-912000uV [ 1.030727] arm-smmu 3da0000.iommu: probing hardware configuration... [ 1.030729] arm-smmu 3da0000.iommu: SMMUv2 with: [ 1.030746] arm-smmu 3da0000.iommu: stage 1 translation [ 1.030748] arm-smmu 3da0000.iommu: coherent table walk [ 1.030749] arm-smmu 3da0000.iommu: stream matching with 9 register groups [ 1.030763] arm-smmu 3da0000.iommu: 7 context banks (0 stage-2 only) [ 1.030776] arm-smmu 3da0000.iommu: Supported page sizes: 0x61311000 [ 1.030778] arm-smmu 3da0000.iommu: Stage-1: 48-bit VA -> 36-bit IPA [ 1.030899] arm-smmu 3da0000.iommu: preserved 0 boot mappings [ 1.033068] arm-smmu 15000000.iommu: probing hardware configuration... [ 1.033070] arm-smmu 15000000.iommu: SMMUv2 with: [ 1.033074] arm-smmu 15000000.iommu: stage 1 translation [ 1.033075] arm-smmu 15000000.iommu: non-coherent table walk [ 1.033077] arm-smmu 15000000.iommu: (IDR0.CTTW overridden by FW configuration) [ 1.033078] arm-smmu 15000000.iommu: stream matching with 162 register groups [ 1.033082] arm-smmu 15000000.iommu: 110 context banks (0 stage-2 only) [ 1.033086] arm-smmu 15000000.iommu: Limiting the stream matching groups to 128 [ 1.033400] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000 [ 1.033402] arm-smmu 15000000.iommu: Stage-1: 36-bit VA -> 36-bit IPA [ 1.033455] arm-smmu 15000000.iommu: preserved 0 boot mappings [ 1.050867] geni_se_qup 8c0000.geniqup: Adding to iommu group 0 [ 1.051266] qcom-pcie 1c00000.pcie: supply vdda not found, using dummy regulator [ 1.051409] qcom-pcie 1c00000.pcie: host bridge /soc@0/pcie@1c00000 ranges: [ 1.051443] qcom-pcie 1c00000.pcie: IO 0x0030200000..0x00302fffff -> 0x0000000000 [ 1.051450] qcom-pcie 1c00000.pcie: MEM 0x0030300000..0x0031ffffff -> 0x0030300000 [ 1.051522] geni_se_qup 9c0000.geniqup: Adding to iommu group 1 [ 1.051627] qcom-pcie 1c10000.pcie: supply vdda not found, using dummy regulator [ 1.051842] qcom-pcie 1c10000.pcie: host bridge /soc@0/pcie@1c10000 ranges: [ 1.051859] qcom-pcie 1c10000.pcie: IO 0x0034200000..0x00342fffff -> 0x0000000000 [ 1.051874] qcom-pcie 1c10000.pcie: MEM 0x0034300000..0x0035ffffff -> 0x0034300000 [ 1.052158] geni_se_qup ac0000.geniqup: Adding to iommu group 2 [ 1.052315] qcom-pcie 1c20000.pcie: supply vdda not found, using dummy regulator [ 1.052559] qcom-pcie 1c20000.pcie: host bridge /soc@0/pcie@1c20000 ranges: [ 1.052570] qcom-pcie 1c20000.pcie: IO 0x003c200000..0x003c2fffff -> 0x0000000000 [ 1.052574] dwc3 a400000.usb: Adding to iommu group 3 [ 1.052575] qcom-pcie 1c20000.pcie: MEM 0x003c300000..0x003dffffff -> 0x003c300000 [ 1.121422] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.121427] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.121556] xhci-hcd xhci-hcd.0.auto: hcc params 0x0120ffe5 hci version 0x110 quirks 0x0000000000000010 [ 1.121567] xhci-hcd xhci-hcd.0.auto: irq 184, io mem 0x0a400000 [ 1.121612] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.121614] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.121615] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.1 Enhanced SuperSpeed [ 1.121648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 1.121650] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.121651] usb usb1: Product: xHCI Host Controller [ 1.121652] usb usb1: Manufacturer: Linux 6.7.2+ xhci-hcd [ 1.121653] usb usb1: SerialNumber: xhci-hcd.0.auto [ 1.121983] hub 1-0:1.0: USB hub found [ 1.121989] hub 1-0:1.0: 4 ports detected [ 1.122074] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.122086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 1.122087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.122088] usb usb2: Product: xHCI Host Controller [ 1.122089] usb usb2: Manufacturer: Linux 6.7.2+ xhci-hcd [ 1.122089] usb usb2: SerialNumber: xhci-hcd.0.auto [ 1.122183] hub 2-0:1.0: USB hub found [ 1.122187] hub 2-0:1.0: 2 ports detected [ 1.123756] PM: genpd: Not disabling unused power domains [ 1.125125] clk: Not disabling unused clocks [ 1.167468] qcom-pcie 1c10000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G [ 1.168003] qcom-pcie 1c00000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G [ 1.168128] qcom-pcie 1c20000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G [ 1.269050] qcom-pcie 1c20000.pcie: PCIe Gen.3 x4 link up [ 1.269309] qcom-pcie 1c00000.pcie: PCIe Gen.3 x1 link up [ 1.269585] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0006:00 [ 1.269589] pci_bus 0006:00: root bus resource [bus 00-ff] [ 1.269592] pci_bus 0006:00: root bus resource [io 0x0000-0xfffff] [ 1.269595] pci_bus 0006:00: root bus resource [mem 0x30300000-0x31ffffff] [ 1.269610] pci 0006:00:00.0: [17cb:010e] type 01 class 0x060400 [ 1.269619] pci 0006:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 1.269624] qcom-pcie 1c20000.pcie: PCI host bridge to bus 0002:00 [ 1.269636] pci_bus 0002:00: root bus resource [bus 00-ff] [ 1.269649] pci_bus 0002:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x0000-0xfffff]) [ 1.269658] pci_bus 0002:00: root bus resource [mem 0x3c300000-0x3dffffff] [ 1.269667] pci 0006:00:00.0: PME# supported from D0 D3hot D3cold [ 1.269700] pci 0002:00:00.0: [17cb:010e] type 01 class 0x060400 [ 1.269719] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 1.269817] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold [ 1.275274] pci 0006:01:00.0: [17cb:1103] type 00 class 0x028000 [ 1.275369] pci 0006:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 1.276041] pci 0006:01:00.0: PME# supported from D0 D3hot D3cold [ 1.276120] pci 0002:01:00.0: [1cc4:6303] type 00 class 0x010802 [ 1.276325] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 1.277693] pci 0006:00:00.0: BAR 14: assigned [mem 0x30400000-0x305fffff] [ 1.277696] pci 0006:00:00.0: BAR 0: assigned [mem 0x30300000-0x30300fff] [ 1.277710] pci 0006:01:00.0: BAR 0: assigned [mem 0x30400000-0x305fffff 64bit] [ 1.277802] pci 0006:00:00.0: PCI bridge to [bus 01-ff] [ 1.277825] pci 0006:00:00.0: bridge window [mem 0x30400000-0x305fffff] [ 1.278255] pci 0002:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0002:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) [ 1.278908] pcieport 0006:00:00.0: PME: Signaling with IRQ 198 [ 1.279988] pcieport 0006:00:00.0: AER: enabled with IRQ 198 [ 1.289351] pci 0002:00:00.0: BAR 14: assigned [mem 0x3c300000-0x3c3fffff] [ 1.289380] pci 0002:00:00.0: BAR 0: assigned [mem 0x3c400000-0x3c400fff] [ 1.289417] pci 0002:01:00.0: BAR 0: assigned [mem 0x3c300000-0x3c303fff 64bit] [ 1.289478] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 1.289490] pci 0002:00:00.0: bridge window [mem 0x3c300000-0x3c3fffff] [ 1.291533] pcieport 0002:00:00.0: PME: Signaling with IRQ 200 [ 1.293111] pcieport 0002:00:00.0: AER: enabled with IRQ 200 [ 1.294357] nvme nvme0: pci function 0002:01:00.0 [ 1.294392] nvme 0002:01:00.0: enabling device (0000 -> 0002) [ 1.304420] hwmon hwmon0: temp1_input not attached to any thermal zone [ 1.306219] nvme nvme0: 8/0/0 default/read/poll queues [ 1.310821] nvme0n1: p1 p2 [ 1.380930] usb 1-4: new full-speed USB device number 2 using xhci-hcd [ 1.541490] usb 1-4: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [ 1.541504] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.541508] usb 1-4: SerialNumber: 5557999d7de3 [ 2.176393] qcom-pcie 1c10000.pcie: Phy link never came up [ 2.176649] qcom-pcie 1c10000.pcie: PCI host bridge to bus 0004:00 [ 2.176670] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.176687] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x0000-0xfffff]) [ 2.176701] pci_bus 0004:00: root bus resource [mem 0x34300000-0x35ffffff] [ 2.176747] pci 0004:00:00.0: [17cb:010e] type 01 class 0x060400 [ 2.176772] pci 0004:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 2.176880] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.184030] pci 0004:00:00.0: BAR 0: assigned [mem 0x34300000-0x34300fff] [ 2.184051] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.187040] pcieport 0004:00:00.0: PME: Signaling with IRQ 211 [ 2.188139] pcieport 0004:00:00.0: AER: enabled with IRQ 211 [ 2.194762] Freeing unused kernel memory: 7488K [ 2.347987] Checked W+X mappings: passed, no W+X pages found [ 2.348000] Run /init as init process [ 2.348002] with arguments: [ 2.348003] /init [ 2.348005] splash [ 2.348005] with environment: [ 2.348006] HOME=/ [ 2.348007] TERM=linux [ 2.348007] BOOT_IMAGE=/boot/vmlinuz-6.7.2+ [ 2.458776] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.460944] NET: Registered PF_QIPCRTR protocol family [ 2.461928] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with usb0-sbu-mux [ 2.462122] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with usb1-sbu-mux [ 2.463716] remoteproc remoteproc0: 3000000.remoteproc is available [ 2.464493] remoteproc remoteproc1: 1b300000.remoteproc is available [ 2.480684] remoteproc remoteproc1: powering up 1b300000.remoteproc [ 2.481791] 988000.serial: ttyHS1 at MMIO 0x988000 (irq = 225, base_baud = 0) is a MSM [ 2.482157] i2c-qcom-cci ac4c000.cci: Found 19200000 cci clk rate while 37500000 was expected [ 2.485158] serial serial0: tty port ttyHS1 registered [ 2.488864] i2c 23-0010: Fixed dependency cycle(s) with /soc@0/camss@ac5a000/ports/port@0/endpoint@0 [ 2.491171] remoteproc remoteproc1: Booting fw image qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn, size 3575808 [ 2.496151] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with 88eb000.phy [ 2.496961] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with 8903000.phy [ 2.499570] dwc3 a600000.usb: Adding to iommu group 4 [ 2.507636] adreno 3d00000.gpu: Adding to iommu group 5 [ 2.508358] msm-mdss ae00000.display-subsystem: Adding to iommu group 6 [ 2.527900] remoteproc remoteproc0: powering up 3000000.remoteproc [ 2.528677] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.528684] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 2.531126] xhci-hcd xhci-hcd.1.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000000000000010 [ 2.531139] xhci-hcd xhci-hcd.1.auto: irq 233, io mem 0x0a600000 [ 2.531182] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.531184] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 2.531186] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed [ 2.531231] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.531233] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.531235] usb usb3: Product: xHCI Host Controller [ 2.531236] usb usb3: Manufacturer: Linux 6.7.2+ xhci-hcd [ 2.531237] usb usb3: SerialNumber: xhci-hcd.1.auto [ 2.531529] hub 3-0:1.0: USB hub found [ 2.531536] hub 3-0:1.0: 1 port detected [ 2.531606] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.531622] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 2.531623] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.531625] usb usb4: Product: xHCI Host Controller [ 2.531626] usb usb4: Manufacturer: Linux 6.7.2+ xhci-hcd [ 2.531627] usb usb4: SerialNumber: xhci-hcd.1.auto [ 2.531698] hub 4-0:1.0: USB hub found [ 2.531703] hub 4-0:1.0: 1 port detected [ 2.531757] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with a600000.usb [ 2.531967] dwc3 a800000.usb: Adding to iommu group 7 [ 2.537273] platform ae90000.displayport-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000/ports/port@0/endpoint [ 2.537468] platform ae98000.displayport-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000/ports/port@4/endpoint [ 2.537619] platform aea0000.displayport-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/displayport-controller@aea0000/aux-bus/panel/port/endpoint [ 2.537627] platform aea0000.displayport-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000/ports/port@5/endpoint [ 2.560919] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 2.560924] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5 [ 2.563342] xhci-hcd xhci-hcd.2.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000000000000010 [ 2.563353] xhci-hcd xhci-hcd.2.auto: irq 235, io mem 0x0a800000 [ 2.563391] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 2.563393] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [ 2.563395] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.1 Enhanced SuperSpeed [ 2.563621] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.563626] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.563628] usb usb5: Product: xHCI Host Controller [ 2.563630] usb usb5: Manufacturer: Linux 6.7.2+ xhci-hcd [ 2.563632] usb usb5: SerialNumber: xhci-hcd.2.auto [ 2.563761] hub 5-0:1.0: USB hub found [ 2.563768] hub 5-0:1.0: 1 port detected [ 2.563844] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.563860] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 2.563861] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.563862] usb usb6: Product: xHCI Host Controller [ 2.563863] usb usb6: Manufacturer: Linux 6.7.2+ xhci-hcd [ 2.563864] usb usb6: SerialNumber: xhci-hcd.2.auto [ 2.563994] hub 6-0:1.0: USB hub found [ 2.563999] hub 6-0:1.0: 1 port detected [ 2.564078] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with a800000.usb [ 2.566369] msm_dpu ae01000.display-controller: bound ae90000.displayport-controller (ops dp_display_comp_ops [msm]) [ 2.566571] msm_dpu ae01000.display-controller: bound ae98000.displayport-controller (ops dp_display_comp_ops [msm]) [ 2.566755] msm_dpu ae01000.display-controller: bound aea0000.displayport-controller (ops dp_display_comp_ops [msm]) [ 2.567018] adreno 3d00000.gpu: supply vdd not found, using dummy regulator [ 2.567047] adreno 3d00000.gpu: supply vddcx not found, using dummy regulator [ 2.567900] platform 3d6a000.gmu: Adding to iommu group 8 [ 2.569886] remoteproc remoteproc0: Booting fw image qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn, size 14367860 [ 2.572312] msm_dpu ae01000.display-controller: bound 3d00000.gpu (ops a3xx_ops [msm]) [ 2.572478] Console: switching to colour dummy device 80x25 [ 2.574140] [drm:dpu_kms_hw_init:1075] dpu hardware revision:0x80000000 [ 2.587717] input: hid-over-i2c 04F3:000D Keyboard as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-21/21-0068/0018:04F3:000D.0001/input/input1 [ 2.587809] input: hid-over-i2c 04F3:000D Mouse as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-21/21-0068/0018:04F3:000D.0001/input/input2 [ 2.587874] hid-generic 0018:04F3:000D.0001: input,hidraw0: I2C HID v1.00 Keyboard [hid-over-i2c 04F3:000D] on 21-0068 [ 2.635344] [drm:_dpu_kms_initialize_displayport:599] [dpu error]modeset_init failed for DP, rc = -517 [ 2.635356] [drm:_dpu_kms_setup_displays:695] [dpu error]initialize_DP failed, rc = -517 [ 2.635360] [drm:dpu_kms_hw_init:1181] [dpu error]modeset init failed: -517 [ 2.635465] msm_dpu ae01000.display-controller: [drm:msm_drm_kms_init [msm]] *ERROR* kms hw init failed: -517 [ 2.639297] [drm:dp_display_probe [msm]] *ERROR* component add failed, rc=-517 [ 2.640116] msm_dpu ae01000.display-controller: bound ae90000.displayport-controller (ops dp_display_comp_ops [msm]) [ 2.640335] msm_dpu ae01000.display-controller: bound ae98000.displayport-controller (ops dp_display_comp_ops [msm]) [ 2.640538] msm_dpu ae01000.display-controller: bound aea0000.displayport-controller (ops dp_display_comp_ops [msm]) [ 2.640816] adreno 3d00000.gpu: supply vdd not found, using dummy regulator [ 2.640860] adreno 3d00000.gpu: supply vddcx not found, using dummy regulator [ 2.645258] msm_dpu ae01000.display-controller: bound 3d00000.gpu (ops a3xx_ops [msm]) [ 2.645544] [drm:dpu_kms_hw_init:1075] dpu hardware revision:0x80000000 [ 2.658290] input: hid-over-i2c 06CB:CE5C Mouse as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-21/21-002c/0018:06CB:CE5C.0002/input/input3 [ 2.658355] input: hid-over-i2c 06CB:CE5C Touchpad as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-21/21-002c/0018:06CB:CE5C.0002/input/input4 [ 2.658418] hid-generic 0018:06CB:CE5C.0002: input,hidraw1: I2C HID v1.00 Mouse [hid-over-i2c 06CB:CE5C] on 21-002c [ 2.659281] irq: IRQ243: trimming hierarchy from :soc@0:interrupt-controller@b220000-9 [ 2.668742] pm8008_ldo6: Bringing 2800000uV into 1800000-1800000uV [ 2.678225] remoteproc remoteproc1: remote processor 1b300000.remoteproc is now up [ 2.682058] qcom,fastrpc 1b300000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC [ 2.682364] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@1: Adding to iommu group 9 [ 2.682633] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@2: Adding to iommu group 10 [ 2.682881] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 11 [ 2.683131] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 12 [ 2.683353] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 13 [ 2.683574] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 14 [ 2.683788] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 15 [ 2.684005] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 16 [ 2.684227] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@9: Adding to iommu group 17 [ 2.684434] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@10: Adding to iommu group 17 [ 2.684626] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@11: Adding to iommu group 18 [ 2.684805] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@12: Adding to iommu group 19 [ 2.684979] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@13: Adding to iommu group 20 [ 2.685150] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@14: Adding to iommu group 21 [ 2.705103] usbcore: registered new interface driver uas [ 2.743170] EXT4-fs (nvme0n1p2): mounted filesystem cfc4d43f-a7ea-4bde-a124-1506447ea792 ro with ordered data mode. Quota mode: none. [ 2.744558] remoteproc remoteproc0: remote processor 3000000.remoteproc is now up [ 2.767992] panel-simple-dp-aux aux-aea0000.displayport-controller: Detected IVO R133NW4K-R0 (0x854b) [ 2.769905] [drm] Initialized msm 1.10.0 20130625 for ae01000.display-controller on minor 0 [ 2.769977] msm_dpu ae01000.display-controller: Direct firmware load for qcom/a660_sqe.fw failed with error -2 [ 2.769980] msm_dpu ae01000.display-controller: [drm:adreno_request_fw [msm]] *ERROR* failed to load a660_sqe.fw [ 2.771270] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 2.796550] systemd[1]: System time before build time, advancing clock. [ 2.817003] usb 5-1: new high-speed USB device number 2 using xhci-hcd [ 2.927838] Console: switching to colour frame buffer device 240x75 [ 2.949747] msm_dpu ae01000.display-controller: [drm] fb0: msmdrmfb frame buffer device [ 2.969120] systemd[1]: Inserted module 'autofs4' [ 2.970326] usb 5-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.81 [ 2.970333] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.970337] usb 5-1: Product: USB2.0 Hub [ 2.970340] usb 5-1: Manufacturer: VIA Labs, Inc. [ 2.970342] usb 5-1: SerialNumber: 000000000 [ 3.012030] hub 5-1:1.0: USB hub found [ 3.012396] hub 5-1:1.0: 5 ports detected [ 3.032685] systemd[1]: systemd 253.5-1ubuntu6.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 3.032694] systemd[1]: Detected architecture arm64. [ 3.034663] systemd[1]: Hostname set to . [ 3.107157] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd [ 3.227008] usb 6-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.81 [ 3.227016] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.227019] usb 6-1: Product: USB3.0 Hub [ 3.227021] usb 6-1: Manufacturer: VIA Labs, Inc. [ 3.227024] usb 6-1: SerialNumber: 000000000 [ 3.252304] hub 6-1:1.0: USB hub found [ 3.252961] hub 6-1:1.0: 4 ports detected [ 3.280085] systemd[1]: Queued start job for default target graphical.target. [ 3.299655] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 3.300266] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 3.300679] systemd[1]: Created slice user.slice - User and Session Slice. [ 3.300778] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 3.301098] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 3.301166] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 3.301218] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 3.301231] systemd[1]: Reached target slices.target - Slice Units. [ 3.301275] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 3.301510] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 3.303499] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 3.303638] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 3.303712] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 3.303834] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 3.303971] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 3.304222] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket. [ 3.304362] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 3.304471] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 3.305997] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 3.306947] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 3.308121] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 3.309053] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 3.311191] systemd[1]: Starting systemd-journald.service - Journal Service... [ 3.312255] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 3.313204] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 3.314022] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 3.314799] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 3.315579] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 3.316336] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 3.317116] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 3.317885] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 3.318680] systemd[1]: Starting mullvad-early-boot-blocking.service - Mullvad early boot network blocker... [ 3.318802] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 3.319495] device-mapper: uevent: version 1.0.3 [ 3.319573] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.319755] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 3.319795] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f). [ 3.320256] fuse: init (API version 7.39) [ 3.320433] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 3.321189] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 3.322447] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 3.322514] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 3.322568] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 3.322608] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 3.322668] loop: module loaded [ 3.322775] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 3.322961] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.323055] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 3.323100] systemd-journald[449]: Collecting audit messages is disabled. [ 3.323202] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 3.323287] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 3.323419] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 3.323506] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 3.323636] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 3.323718] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 3.323846] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 3.323928] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 3.324072] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 3.324156] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 3.324977] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 3.325633] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 3.325698] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 3.325992] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 3.326690] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 3.327412] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 3.327481] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 3.333780] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 3.340185] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 3.343895] systemd[1]: Started systemd-journald.service - Journal Service. [ 3.349298] EXT4-fs (nvme0n1p2): re-mounted cfc4d43f-a7ea-4bde-a124-1506447ea792 r/w. Quota mode: none. [ 3.354105] Adding 8388604k swap on /swap.img. Priority:-2 extents:65 across:9043968k SS [ 3.355224] systemd-journald[449]: Received client request to flush runtime journal. [ 3.356607] systemd-journald[449]: File /var/log/journal/249f6e6031a64ea5bb6eb7b70c359512/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 3.523205] alg: No test for stdrng (qcom-rng) [ 3.543723] input: hid-over-i2c 04F3:2FE6 as /devices/platform/soc@0/9c0000.geniqup/990000.i2c/i2c-4/4-0010/0018:04F3:2FE6.0003/input/input6 [ 3.552441] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.558415] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.558516] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.568230] mc: Linux media interface: v0.10 [ 3.582434] videodev: Linux video capture interface: v2.00 [ 3.586441] ath11k_pci 0006:01:00.0: BAR 0: assigned [mem 0x30400000-0x305fffff 64bit] [ 3.586555] ath11k_pci 0006:01:00.0: enabling device (0000 -> 0002) [ 3.588216] input: hid-over-i2c 04F3:2FE6 UNKNOWN as /devices/platform/soc@0/9c0000.geniqup/990000.i2c/i2c-4/4-0010/0018:04F3:2FE6.0003/input/input7 [ 3.589346] input: hid-over-i2c 04F3:2FE6 UNKNOWN as /devices/platform/soc@0/9c0000.geniqup/990000.i2c/i2c-4/4-0010/0018:04F3:2FE6.0003/input/input8 [ 3.592128] hid-multitouch 0018:04F3:2FE6.0003: input,hidraw1: I2C HID v1.00 Device [hid-over-i2c 04F3:2FE6] on 4-0010 [ 3.592294] EDAC DEVICE0: Giving out device to module qcom_llcc_edac controller llcc: DEV qcom_llcc_edac (INTERRUPT) [ 3.593561] ath11k_pci 0006:01:00.0: MSI vectors: 32 [ 3.593606] ath11k_pci 0006:01:00.0: wcn6855 hw2.1 [ 3.601604] qcom-venus aa00000.video-codec: Adding to iommu group 22 [ 3.602346] input: hid-over-i2c 06CB:CE5C Mouse as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-21/21-002c/0018:06CB:CE5C.0002/input/input10 [ 3.603176] qcom-venus aa00000.video-codec: non legacy binding [ 3.611486] qcom-camss ac5a000.camss: Adding to iommu group 23 [ 3.611899] input: hid-over-i2c 06CB:CE5C Touchpad as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-21/21-002c/0018:06CB:CE5C.0002/input/input11 [ 3.619379] hid-multitouch 0018:06CB:CE5C.0002: input,hidraw2: I2C HID v1.00 Mouse [hid-over-i2c 06CB:CE5C] on 21-002c [ 3.623276] msm_dpu ae01000.display-controller: [drm:adreno_request_fw [msm]] loaded qcom/a660_sqe.fw from new location [ 3.623669] msm_dpu ae01000.display-controller: [drm:adreno_request_fw [msm]] loaded qcom/a660_gmu.bin from new location [ 3.655689] debugfs: File 'uA_load' in directory '/' already present! [ 3.655716] debugfs: File 'min_uV' in directory '/' already present! [ 3.655738] debugfs: File 'max_uV' in directory '/' already present! [ 3.655749] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.655932] debugfs: File 'uA_load' in directory '/' already present! [ 3.655943] debugfs: File 'min_uV' in directory '/' already present! [ 3.655953] debugfs: File 'max_uV' in directory '/' already present! [ 3.655963] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.656196] debugfs: File 'uA_load' in directory '/' already present! [ 3.656217] debugfs: File 'min_uV' in directory '/' already present! [ 3.656231] debugfs: File 'max_uV' in directory '/' already present! [ 3.656242] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.656328] debugfs: File 'uA_load' in directory '/' already present! [ 3.656339] debugfs: File 'min_uV' in directory '/' already present! [ 3.656359] debugfs: File 'max_uV' in directory '/' already present! [ 3.656369] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.656384] debugfs: File 'uA_load' in directory '/' already present! [ 3.656394] debugfs: File 'min_uV' in directory '/' already present! [ 3.656404] debugfs: File 'max_uV' in directory '/' already present! [ 3.656413] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.656962] debugfs: File 'uA_load' in directory '/' already present! [ 3.656983] debugfs: File 'min_uV' in directory '/' already present! [ 3.656994] debugfs: File 'max_uV' in directory '/' already present! [ 3.657006] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.657378] debugfs: File 'uA_load' in directory '/' already present! [ 3.657407] debugfs: File 'min_uV' in directory '/' already present! [ 3.657426] debugfs: File 'max_uV' in directory '/' already present! [ 3.657440] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.658151] debugfs: File 'uA_load' in directory '/' already present! [ 3.658177] debugfs: File 'min_uV' in directory '/' already present! [ 3.658196] debugfs: File 'max_uV' in directory '/' already present! [ 3.658212] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.658759] debugfs: File 'uA_load' in directory '/' already present! [ 3.658783] debugfs: File 'min_uV' in directory '/' already present! [ 3.658798] debugfs: File 'max_uV' in directory '/' already present! [ 3.658811] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.659538] debugfs: File 'uA_load' in directory '/' already present! [ 3.659618] debugfs: File 'min_uV' in directory '/' already present! [ 3.659665] debugfs: File 'max_uV' in directory '/' already present! [ 3.659695] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.659930] debugfs: File 'uA_load' in directory '/' already present! [ 3.659949] debugfs: File 'min_uV' in directory '/' already present! [ 3.659961] debugfs: File 'max_uV' in directory '/' already present! [ 3.659972] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.661089] debugfs: File 'uA_load' in directory '/' already present! [ 3.661119] debugfs: File 'min_uV' in directory '/' already present! [ 3.661139] debugfs: File 'max_uV' in directory '/' already present! [ 3.661200] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.661438] debugfs: File 'uA_load' in directory '/' already present! [ 3.661482] debugfs: File 'min_uV' in directory '/' already present! [ 3.661512] debugfs: File 'max_uV' in directory '/' already present! [ 3.661530] debugfs: File 'constraint_flags' in directory '/' already present! [ 3.663294] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6100: registered as rtc0 [ 3.663325] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6100: setting system clock to 2024-02-03T08:57:48 UTC (1706950668) [ 3.664567] systemd-journald[449]: Oldest entry in /var/log/journal/249f6e6031a64ea5bb6eb7b70c359512/system.journal is older than the configured file retention duration (1month), suggesting rotation. [ 3.664572] systemd-journald[449]: /var/log/journal/249f6e6031a64ea5bb6eb7b70c359512/system.journal: Journal header limits reached or header out-of-date, rotating. [ 3.681367] Bluetooth: Core ver 2.22 [ 3.683301] NET: Registered PF_BLUETOOTH protocol family [ 3.683303] Bluetooth: HCI device and connection manager initialized [ 3.683308] Bluetooth: HCI socket layer initialized [ 3.683311] Bluetooth: L2CAP socket layer initialized [ 3.683316] Bluetooth: SCO socket layer initialized [ 3.755501] Bluetooth: HCI UART driver ver 2.3 [ 3.755508] Bluetooth: HCI UART protocol H4 registered [ 3.758261] Bluetooth: HCI UART protocol LL registered [ 3.758263] Bluetooth: HCI UART protocol ATH3K registered [ 3.760250] mhi mhi0: Requested to power ON [ 3.760266] mhi mhi0: Power on setup success [ 3.761795] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 3.768338] Bluetooth: HCI UART protocol Intel registered [ 3.768545] usb 5-1.5: new high-speed USB device number 3 using xhci-hcd [ 3.771536] Bluetooth: HCI UART protocol Broadcom registered [ 3.772702] Bluetooth: HCI UART protocol QCA registered [ 3.772705] Bluetooth: HCI UART protocol AG6XX registered [ 3.774502] Bluetooth: HCI UART protocol Marvell registered [ 3.791501] Bluetooth: hci0: setting up wcn6855 [ 3.829425] input: pmic_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@1300/c440000.spmi:pmic@0:pon@1300:pwrkey/input/input13 [ 3.836209] input: pmic_resin as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@1300/c440000.spmi:pmic@0:pon@1300:resin/input/input14 [ 3.857308] Bluetooth: hci0: Frame reassembly failed (-84) [ 3.868787] mhi mhi0: Wait for device to enter SBL or Mission mode [ 3.874030] usb 5-1.5: New USB device found, idVendor=291a, idProduct=8346, bcdDevice= 0.01 [ 3.874036] usb 5-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.874038] usb 5-1.5: Product: Anker USB-C Hub Device [ 3.874039] usb 5-1.5: Manufacturer: AnkerInnovations Limited [ 3.874041] usb 5-1.5: SerialNumber: 0000000000000001 [ 3.913650] Bluetooth: hci0: QCA Product ID :0x00000013 [ 3.913657] Bluetooth: hci0: QCA SOC Version :0x400c0210 [ 3.913658] Bluetooth: hci0: QCA ROM Version :0x00000201 [ 3.913659] Bluetooth: hci0: QCA Patch Version:0x000038e6 [ 3.921533] Bluetooth: hci0: QCA controller version 0x02100201 [ 3.921538] Bluetooth: hci0: QCA Downloading qca/hpbtfw21.tlv [ 3.957405] usb 6-1.3: new SuperSpeed USB device number 3 using xhci-hcd [ 3.983123] usb 6-1.3: New USB device found, idVendor=05e3, idProduct=0749, bcdDevice=15.39 [ 3.983133] usb 6-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 3.983137] usb 6-1.3: Product: USB3.0 Card Reader [ 3.983140] usb 6-1.3: Manufacturer: Generic [ 3.983144] usb 6-1.3: SerialNumber: 000000001539 [ 3.983991] usb-storage 6-1.3:1.0: USB Mass Storage device detected [ 3.984474] scsi host0: usb-storage 6-1.3:1.0 [ 4.395933] audit: type=1400 audit(1706950669.227:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="android_app" pid=796 comm="apparmor_parser" [ 4.395963] audit: type=1400 audit(1706950669.227:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="adbd" pid=795 comm="apparmor_parser" [ 4.397334] audit: type=1400 audit(1706950669.231:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/brave.com/brave/brave" pid=803 comm="apparmor_parser" [ 4.397358] audit: type=1400 audit(1706950669.231:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/bin/toybox" pid=797 comm="apparmor_parser" [ 4.397570] audit: type=1400 audit(1706950669.231:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/google/chrome/chrome" pid=804 comm="apparmor_parser" [ 4.398733] audit: type=1400 audit(1706950669.231:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/vivaldi/vivaldi-bin" pid=806 comm="apparmor_parser" [ 4.398737] audit: type=1400 audit(1706950669.231:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/microsoft/msedge/msedge" pid=805 comm="apparmor_parser" [ 4.398738] audit: type=1400 audit(1706950669.231:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=798 comm="apparmor_parser" [ 4.398910] audit: type=1400 audit(1706950669.231:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=802 comm="apparmor_parser" [ 4.523912] ath11k_pci 0006:01:00.0: chip_id 0x2 chip_family 0xb board_id 0x8c soc_id 0x400c0210 [ 4.523918] ath11k_pci 0006:01:00.0: fw_version 0x110b196e fw_build_timestamp 2022-12-22 12:54 fw_build_id WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 [ 4.548814] Bluetooth: hci0: QCA Downloading qca/hpnv21.b8c [ 4.549659] bluetooth hci0: Direct firmware load for qca/hpnv21.b8c failed with error -2 [ 4.549664] Bluetooth: hci0: QCA Downloading qca/hpnv21.bin [ 4.553468] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.553473] Bluetooth: BNEP filters: protocol multicast [ 4.553479] Bluetooth: BNEP socket layer initialized [ 4.559053] qcom,apr 3000000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1 [ 4.559094] qcom,apr 3000000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2 [ 4.711811] Bluetooth: hci0: QCA setup on UART is completed [ 4.870372] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.899041] Initializing XFRM netlink socket [ 4.904236] IPsec XFRM device driver [ 4.928637] ath11k_pci 0006:01:00.0 wlP6p1s0: renamed from wlan0 [ 4.953065] PPP generic driver version 2.4.2 [ 4.969674] NET: Registered PF_PPPOX protocol family [ 4.972733] l2tp_core: L2TP core driver, V2.0 [ 4.973346] l2tp_netlink: L2TP netlink interface [ 4.973938] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 4.990342] scsi 0:0:0:0: Direct-Access Generic MassStorageClass 1539 PQ: 0 ANSI: 6 [ 4.991750] scsi 0:0:0:1: Direct-Access Generic MassStorageClass 1539 PQ: 0 ANSI: 6 [ 4.993089] sd 0:0:0:0: [sda] Media removed, stopped polling [ 4.993332] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.994831] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.994853] sd 0:0:0:1: Attached scsi generic sg1 type 0 [ 5.195939] sd 0:0:0:1: [sdb] Media removed, stopped polling [ 5.196494] sd 0:0:0:1: [sdb] Attached SCSI removable disk [ 9.563493] Bluetooth: MGMT ver 1.22 [ 9.564645] Bluetooth: hci0: setting up wcn6855 [ 9.690635] Bluetooth: hci0: QCA Product ID :0x00000013 [ 9.690663] Bluetooth: hci0: QCA SOC Version :0x400c0210 [ 9.690672] Bluetooth: hci0: QCA ROM Version :0x00000201 [ 9.690680] Bluetooth: hci0: QCA Patch Version:0x000038e6 [ 9.696603] qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode [ 9.710298] Bluetooth: hci0: QCA controller version 0x02100201 [ 9.710309] Bluetooth: hci0: QCA Downloading qca/hpbtfw21.tlv [ 9.723126] q6apm-dai 3000000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 24 [ 9.741571] qcom-soundwire 3210000.soundwire-controller: Qualcomm Soundwire controller v1.6.0 Registered [ 9.747421] qcom-soundwire 3250000.soundwire-controller: Qualcomm Soundwire controller v1.6.0 Registered [ 9.748827] wsa883x-codec sdw:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2 [ 9.749116] wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:4 (ops wcd938x_sdw_component_ops [snd_soc_wcd938x_sdw]) [ 9.749149] wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:3 (ops wcd938x_sdw_component_ops [snd_soc_wcd938x_sdw]) [ 9.751037] qcom-soundwire 3330000.soundwire-controller: Qualcomm Soundwire controller v1.6.0 Registered [ 9.751748] wsa883x-codec sdw:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2 [ 9.754965] wsa883x-codec sdw:0:0217:0202:00:2: WSA883X Version 1_1, Variant: WSA8835_V2 [ 9.768062] snd-sc8280xp sound: ASoC: Parent card not yet available, widget card binding deferred [ 9.771888] snd-sc8280xp sound: ASoC: Failed to add route ADC2_OUTPUT -> TX SWR_ADC1(*) [ 10.335005] Bluetooth: hci0: QCA Downloading qca/hpnv21.b8c [ 10.335111] bluetooth hci0: Direct firmware load for qca/hpnv21.b8c failed with error -2 [ 10.335123] Bluetooth: hci0: QCA Downloading qca/hpnv21.bin [ 10.553629] Bluetooth: hci0: QCA setup on UART is completed [ 10.681608] NET: Registered PF_ALG protocol family [ 10.698626] Bluetooth: RFCOMM TTY layer initialized [ 10.698639] Bluetooth: RFCOMM socket layer initialized [ 10.698650] Bluetooth: RFCOMM ver 1.11 [ 11.984221] wlP6p1s0: authenticate with d8:32:14:46:27:4c (local address=8c:fd:f0:9f:6e:60) [ 11.984254] wlP6p1s0: send auth to d8:32:14:46:27:4c (try 1/3) [ 11.996797] wlP6p1s0: authenticated [ 12.001145] wlP6p1s0: associate with d8:32:14:46:27:4c (try 1/3) [ 12.018408] wlP6p1s0: RX AssocResp from d8:32:14:46:27:4c (capab=0x411 status=0 aid=2) [ 12.035526] wlP6p1s0: associated [ 34.646631] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 34.923265] systemd-journald[449]: Time jumped backwards, rotating.