[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x410fd034] [ 0.000000] Linux version 6.6.0-umeko-compile-rv1-gffe6e7e84d39-dirty (umeko@97df89c06e5c) (aarch64-linux-gnu-gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #12 SMP PREEMPT Thu Jan 4 20:37:48 CST 2024 [ 0.000000] Machine model: Xiaomi Redmi 4X (santoni) [ 0.000000] OF: reserved mem: 0x0000000086800000..0x0000000086efffff (7168 KiB) nomap non-reusable wcnss [ 0.000000] OF: reserved mem: 0x0000000084a00000..0x00000000862fffff (25600 KiB) nomap non-reusable reserved@84a00000 [ 0.000000] OF: reserved mem: 0x0000000086300000..0x00000000863fffff (1024 KiB) nomap non-reusable smem@86300000 [ 0.000000] OF: reserved mem: 0x0000000086400000..0x00000000867fffff (4096 KiB) nomap non-reusable reserved@86400000 [ 0.000000] OF: reserved mem: 0x0000000090001000..0x00000000902a3fff (2700 KiB) nomap non-reusable memory@90001000 [ 0.000000] OF: reserved mem: 0x0000000092100000..0x000000009227ffff (1536 KiB) nomap non-reusable rmtfs@92100000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000849fffff] [ 0.000000] node 0: [mem 0x0000000084a00000-0x0000000086efffff] [ 0.000000] node 0: [mem 0x0000000086f00000-0x0000000090000fff] [ 0.000000] node 0: [mem 0x0000000090001000-0x00000000902a3fff] [ 0.000000] node 0: [mem 0x00000000902a4000-0x00000000920fffff] [ 0.000000] node 0: [mem 0x0000000092100000-0x000000009227ffff] [ 0.000000] node 0: [mem 0x0000000092280000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fbe00000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -1 [ 0.000000] percpu: Embedded 22 pages/cpu s51368 r8192 d30552 u90112 [ 0.000000] pcpu-alloc: s51368 r8192 d30552 u90112 alloc=22*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=tty0 root=UUID=93afcbbe-875f-49b0-83da-ee8193f20ca5 rw loglevel=3 splash [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000f7b00000-0x00000000fbb00000] (64MB) [ 0.000000] Memory: 1899352K/2097152K available (7104K kernel code, 1128K rwdata, 3124K rodata, 1792K init, 394K bss, 165032K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000292] Console: colour dummy device 80x25 [ 0.000305] printk: console [tty0] enabled [ 0.000385] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.000402] pid_max: default: 32768 minimum: 301 [ 0.000624] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000645] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002998] rcu: Hierarchical SRCU implementation. [ 0.003007] rcu: Max phase no-delay instances is 1000. [ 0.004062] smp: Bringing up secondary CPUs ... [ 0.004679] Detected VIPT I-cache on CPU1 [ 0.004787] CPU1: Booted secondary processor 0x0000000101 [0x410fd034] [ 0.005456] Detected VIPT I-cache on CPU2 [ 0.005545] CPU2: Booted secondary processor 0x0000000102 [0x410fd034] [ 0.006202] Detected VIPT I-cache on CPU3 [ 0.006292] CPU3: Booted secondary processor 0x0000000103 [0x410fd034] [ 0.008710] Detected VIPT I-cache on CPU4 [ 0.012316] CPU4: Booted secondary processor 0x0000000000 [0x410fd034] [ 0.018982] Detected VIPT I-cache on CPU5 [ 0.022609] CPU5: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.028318] Detected VIPT I-cache on CPU6 [ 0.032046] CPU6: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.038196] Detected VIPT I-cache on CPU7 [ 0.042027] CPU7: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.045318] smp: Brought up 1 node, 8 CPUs [ 0.045366] SMP: Total of 8 processors activated. [ 0.045375] CPU features: detected: 32-bit EL0 Support [ 0.045382] CPU features: detected: 32-bit EL1 Support [ 0.045392] CPU features: detected: CRC32 instructions [ 0.046504] CPU: All CPU(s) started at EL1 [ 0.046546] alternatives: applying system-wide alternatives [ 0.055551] devtmpfs: initialized [ 0.070419] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.070469] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.073171] pinctrl core: initialized pinctrl subsystem [ 0.074962] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.081442] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.082459] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.083600] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.083689] audit: initializing netlink subsys (disabled) [ 0.084956] audit: type=2000 audit(0.084:1): state=initialized audit_enabled=0 res=1 [ 0.085328] thermal_sys: Registered thermal governor 'step_wise' [ 0.085729] cpuidle: using governor menu [ 0.086163] NET: Registered PF_QIPCRTR protocol family [ 0.086541] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.089124] ASID allocator initialised with 65536 entries [ 0.114095] Modules: 29328 pages in range for non-PLT usage [ 0.114145] Modules: 520848 pages in range for PLT usage [ 0.116845] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.116862] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.116874] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.116882] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.116892] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.116899] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.116909] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.116917] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.120326] iommu: Default domain type: Translated [ 0.120338] iommu: DMA domain TLB invalidation policy: strict mode [ 0.120801] usbcore: registered new interface driver usbfs [ 0.120866] usbcore: registered new interface driver hub [ 0.120969] usbcore: registered new device driver usb [ 0.121591] psci: [Firmware Bug]: failed to set OSI mode: -1 [ 0.121838] CPUidle PSCI: Initialized CPU PM domain topology using PC mode [ 0.122485] scmi_core: SCMI protocol bus registered [ 0.124241] Bluetooth: Core ver 2.22 [ 0.124293] NET: Registered PF_BLUETOOTH protocol family [ 0.124302] Bluetooth: HCI device and connection manager initialized [ 0.124324] Bluetooth: HCI socket layer initialized [ 0.124339] Bluetooth: L2CAP socket layer initialized [ 0.124366] Bluetooth: SCO socket layer initialized [ 0.126322] clocksource: Switched to clocksource arch_sys_counter [ 0.126865] VFS: Disk quotas dquot_6.6.0 [ 0.126937] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.139377] NET: Registered PF_INET protocol family [ 0.140058] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.143224] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.143294] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.143323] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.143606] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.144889] TCP: Hash tables configured (established 16384 bind 16384) [ 0.145277] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.145366] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.145669] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.147005] Unpacking initramfs... [ 0.160514] kvm [1]: HYP mode not available [ 0.163625] Initialise system trusted keyrings [ 0.167242] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.230245] Key type asymmetric registered [ 0.230368] Asymmetric key parser 'x509' registered [ 0.230779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.327373] msm_serial: driver initialized [ 0.352692] Freeing initrd memory: 5888K [ 0.361967] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.509772] UDC core: g_serial: couldn't find an available UDC [ 0.548453] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: registered as rtc0 [ 0.549671] rtc-pm8xxx 200f000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T09:22:34 UTC (33754) [ 0.619705] input: pm8941_pwrkey as /devices/platform/soc@0/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:pwrkey/input/input0 [ 0.667350] input: pm8941_resin as /devices/platform/soc@0/200f000.spmi/spmi-0/0-00/200f000.spmi:pmic@0:pon@800/200f000.spmi:pmic@0:pon@800:resin/input/input1 [ 0.759153] sdhci: Secure Digital Host Controller Interface driver [ 0.759230] sdhci: Copyright(c) Pierre Ossman [ 0.759237] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.760968] usbcore: registered new interface driver usbhid [ 0.760980] usbhid: USB HID core driver [ 0.767738] qcom-spmi-vadc 200f000.spmi:pmic@2:adc@3100: Please define VDD channel [ 0.772382] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.779882] xt_time: kernel timezone is -0000 [ 0.780248] Initializing XFRM netlink socket [ 0.780360] NET: Registered PF_INET6 protocol family [ 0.782644] Segment Routing with IPv6 [ 0.782707] In-situ OAM (IOAM) with IPv6 [ 0.782877] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.783836] NET: Registered PF_PACKET protocol family [ 0.783862] NET: Registered PF_KEY protocol family [ 0.783921] Key type dns_resolver registered [ 0.793255] registered taskstats version 1 [ 0.793266] Loading compiled-in X.509 certificates [ 1.145569] Key type encrypted registered [ 1.177453] s1: Bringing 0uV into 1000000-1000000uV [ 1.178051] s3: Bringing 0uV into 1300000-1300000uV [ 1.178560] s4: Bringing 0uV into 2050000-2050000uV [ 1.178943] l2: Bringing 0uV into 1200000-1200000uV [ 1.179295] l5: Bringing 0uV into 1800000-1800000uV [ 1.179777] l6: Bringing 0uV into 1800000-1800000uV [ 1.180493] l7: Bringing 0uV into 1800000-1800000uV [ 1.180826] l8: Bringing 0uV into 2850000-2850000uV [ 1.181268] l9: Bringing 0uV into 3000000-3000000uV [ 1.181594] l10: Bringing 0uV into 2800000-2800000uV [ 1.181943] l11: Bringing 0uV into 2950000-2950000uV [ 1.182384] l12: Bringing 0uV into 1800000-1800000uV [ 1.182753] l13: Bringing 0uV into 3075000-3075000uV [ 1.183120] l14: Bringing 0uV into 1800000-1800000uV [ 1.183543] l15: Bringing 0uV into 1800000-1800000uV [ 1.183891] l16: Bringing 0uV into 1800000-1800000uV [ 1.184249] l17: Bringing 0uV into 2800000-2800000uV [ 1.184699] l19: Bringing 0uV into 1225000-1225000uV [ 1.185055] l22: Bringing 0uV into 2800000-2800000uV [ 1.185426] l23: Bringing 0uV into 1200000-1200000uV [ 1.196571] qcom_scm: convention: smc arm 64 [ 1.207494] msm_serial 78b0000.serial: msm_serial: detected port #0 [ 1.207552] msm_serial 78b0000.serial: uartclk = 7372798 [ 1.207949] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 32, base_baud = 460799) is a MSM [ 1.212965] [drm] Initialized simpledrm 1.0.0 20200625 for 90001000.framebuffer on minor 0 [ 1.240948] Console: switching to colour frame buffer device 90x80 [ 1.311063] simple-framebuffer 90001000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device [ 1.327247] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.327321] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.346124] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.346483] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 1.346501] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.346514] usb usb1: Product: EHCI Host Controller [ 1.346526] usb usb1: Manufacturer: Linux 6.6.0-umeko-compile-rv1-gffe6e7e84d39-dirty ehci_hcd [ 1.346538] usb usb1: SerialNumber: ci_hdrc.0 [ 1.347481] hub 1-0:1.0: USB hub found [ 1.347547] hub 1-0:1.0: 1 port detected [ 1.348963] i2c_qup 78b6000.i2c: using default clock-frequency 100000 [ 1.356666] qcom-tsens 4a9000.thermal-sensor: Please migrate to separate nvmem cells for calibration data [ 1.373739] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 1.375949] clk: Disabling unused clocks [ 1.404549] sdhci_msm 7864900.sdhci: Got CD GPIO [ 1.406810] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit [ 1.475130] mmc0: new HS400 MMC card at address 0001 [ 1.477737] mmcblk0: mmc0:0001 QE13MB 14.6 GiB [ 1.481585] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 [ 1.493404] mmcblk0boot0: mmc0:0001 QE13MB 4.00 MiB [ 1.495614] mmcblk0boot1: mmc0:0001 QE13MB 4.00 MiB [ 1.496914] mmcblk0rpmb: mmc0:0001 QE13MB 4.00 MiB, chardev (243:0) [ 1.498816] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit [ 1.505916] Freeing unused kernel memory: 1792K [ 1.518990] Run /init as init process [ 1.519004] with arguments: [ 1.519010] /init [ 1.519016] splash [ 1.519022] with environment: [ 1.519027] HOME=/ [ 1.519033] TERM=linux [ 1.614166] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 1.771067] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 [ 1.771132] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.771146] usb 1-1: Product: USB2.0 HUB [ 1.772305] hub 1-1:1.0: USB hub found [ 1.772534] hub 1-1:1.0: 4 ports detected [ 2.166195] usb 1-1.4: new full-speed USB device number 3 using ci_hdrc [ 2.377802] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 2.377831] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.377844] usb 1-1.4: Product: USB Receiver [ 2.377856] usb 1-1.4: Manufacturer: Logitech [ 2.384394] input: Logitech USB Receiver as /devices/platform/soc@0/78db000.usb/ci_hdrc.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0001/input/input3 [ 2.442985] hid-generic 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-ci_hdrc.0-1.4/input0 [ 2.452214] input: Logitech USB Receiver Mouse as /devices/platform/soc@0/78db000.usb/ci_hdrc.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input4 [ 2.452647] input: Logitech USB Receiver Consumer Control as /devices/platform/soc@0/78db000.usb/ci_hdrc.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input5 [ 2.510454] input: Logitech USB Receiver System Control as /devices/platform/soc@0/78db000.usb/ci_hdrc.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input6 [ 2.510642] hid-generic 0003:046D:C52B.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-ci_hdrc.0-1.4/input1 [ 2.518000] hid-generic 0003:046D:C52B.0003: device has no listeners, quitting [ 6.405738] EXT4-fs (mmcblk0p49): mounted filesystem 93afcbbe-875f-49b0-83da-ee8193f20ca5 r/w with ordered data mode. Quota mode: none. [ 7.431867] systemd[1]: System time before build time, advancing clock. [ 7.447293] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.448271] systemd[1]: Detected architecture arm64. [ 7.500564] systemd[1]: Set hostname to . [ 10.483333] random: crng init done [ 10.486636] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 10.486727] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 10.491399] systemd[1]: Created slice system-getty.slice. [ 10.495727] systemd[1]: Created slice system-modprobe.slice. [ 10.497579] systemd[1]: Created slice User and Session Slice. [ 10.500567] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 10.504301] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.505003] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 10.505120] systemd[1]: Reached target Local Encrypted Volumes. [ 10.505662] systemd[1]: Reached target Paths. [ 10.506010] systemd[1]: Reached target Remote File Systems. [ 10.506660] systemd[1]: Reached target Slices. [ 10.507169] systemd[1]: Reached target Swap. [ 10.508323] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.511108] systemd[1]: Listening on Journal Audit Socket. [ 10.512390] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.513500] systemd[1]: Listening on Journal Socket. [ 10.514732] systemd[1]: Listening on udev Control Socket. [ 10.515536] systemd[1]: Listening on udev Kernel Socket. [ 10.543188] systemd[1]: Mounting Huge Pages File System... [ 10.568768] systemd[1]: Mounting POSIX Message Queue File System... [ 10.581157] systemd[1]: Mounting Kernel Debug File System... [ 10.583259] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 10.594497] systemd[1]: Starting Journal Service... [ 10.600878] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 10.611039] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 10.612630] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 10.623473] systemd[1]: Starting Load Kernel Module efi_pstore... [ 10.637710] systemd[1]: Starting Load Kernel Module pstore_blk... [ 10.654012] systemd[1]: Starting Load Kernel Module pstore_zone... [ 10.656275] systemd[1]: Condition check resulted in Load Kernel Module ramoops being skipped. [ 10.658912] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 10.675229] systemd[1]: Starting Load Kernel Modules... [ 10.689950] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.705306] systemd[1]: Starting udev Coldplug all Devices... [ 10.725150] systemd[1]: Mounted Huge Pages File System. [ 10.729990] systemd[1]: modprobe@chromeos_pstore.service: Succeeded. [ 10.734402] systemd[1]: Finished Load Kernel Module chromeos_pstore. [ 10.741164] systemd[1]: modprobe@efi_pstore.service: Succeeded. [ 10.745112] systemd[1]: Finished Load Kernel Module efi_pstore. [ 10.749897] systemd[1]: modprobe@pstore_blk.service: Succeeded. [ 10.753691] systemd[1]: Finished Load Kernel Module pstore_blk. [ 10.756986] systemd[1]: modprobe@pstore_zone.service: Succeeded. [ 10.763675] systemd[1]: Finished Load Kernel Module pstore_zone. [ 10.768641] systemd[1]: Finished Load Kernel Modules. [ 10.776180] systemd[1]: Finished Remount Root and Kernel File Systems. [ 10.779220] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 10.795151] systemd[1]: Mounting Kernel Configuration File System... [ 10.798623] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 10.799382] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 10.810659] systemd[1]: Starting Load/Save Random Seed... [ 10.823771] systemd[1]: Starting Apply Kernel Variables... [ 10.839536] systemd[1]: Starting Create System Users... [ 10.862957] systemd[1]: Mounted Kernel Configuration File System. [ 10.958843] systemd[1]: Mounted POSIX Message Queue File System. [ 10.964864] systemd[1]: Finished Load/Save Random Seed. [ 11.123263] systemd[1]: Finished Apply Kernel Variables. [ 11.138380] systemd[1]: Mounted Kernel Debug File System. [ 11.164329] systemd[1]: Finished Create System Users. [ 11.343783] systemd[1]: Starting Create Static Device Nodes in /dev... [ 11.345961] systemd[1]: Started Journal Service. [ 11.569588] systemd-journald[219]: Received client request to flush runtime journal. [ 11.619337] systemd-journald[219]: File /var/log/journal/bfc00bbc02ac4aafa3ab9a15e9742f28/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 14.203155] qcom-wcnss-pil a204000.remoteproc: supply vddpx not found, using dummy regulator [ 14.288448] remoteproc remoteproc0: a204000.remoteproc is available [ 14.293223] remoteproc remoteproc0: powering up a204000.remoteproc [ 14.293297] remoteproc remoteproc0: Booting fw image wcnss.mdt, size 7324 [ 14.482289] mousedev: PS/2 mouse device common for all mice [ 16.870276] ------------[ cut here ]------------ [ 16.870339] Unbalanced enable for IRQ 37 [ 16.870435] WARNING: CPU: 0 PID: 235 at kernel/irq/manage.c:789 __enable_irq+0x38/0x64 [ 16.870495] Modules linked in: mousedev qcom_wcnss_pil qcom_pil_info mdt_loader qcom_common qcom_sysmon [ 16.870562] CPU: 0 PID: 235 Comm: kworker/0:2 Not tainted 6.6.0-umeko-compile-rv1-gffe6e7e84d39-dirty #12 [ 16.870580] Hardware name: Xiaomi Redmi 4X (santoni) (DT) [ 16.870596] Workqueue: events wled_ovp_work [ 16.870647] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 16.870663] pc : __enable_irq+0x38/0x64 [ 16.870674] lr : __enable_irq+0x38/0x64 [ 16.870684] sp : ffff000002487d70 [ 16.870689] x29: ffff000002487d70 x28: 0000000000000000 x27: ffff000001010005 [ 16.870708] x26: 61c8864680b583eb x25: ffff0000019fab80 x24: ffff800080a74008 [ 16.870726] x23: ffff000001e19f30 x22: ffff000001e19f28 x21: ffff00007feecf00 [ 16.870744] x20: 0000000000000025 x19: ffff000001e1a200 x18: 0000000000000000 [ 16.870762] x17: 0000000000000001 x16: 0000000100000000 x15: 000000000000000a [ 16.870779] x14: 0000000000000000 x13: 3733205152492072 x12: 6f6620656c62616e [ 16.870798] x11: ffffffffffffffff x10: 000000000000000a x9 : ffff800080d0c9ae [ 16.870815] x8 : ffff800080bfb440 x7 : ffff000002487b90 x6 : 00000000fffff142 [ 16.870832] x5 : ffff00007fee3990 x4 : 0000000000000000 x3 : 0000000000000027 [ 16.870851] x2 : 0000000000000023 x1 : ffff000001b44f80 x0 : 0000000100000001 [ 16.870871] Call trace: [ 16.870877] __enable_irq+0x38/0x64 [ 16.870889] enable_irq+0x64/0x68 [ 16.870902] wled_ovp_work+0x10/0x18 [ 16.870917] process_scheduled_works+0x180/0x200 [ 16.870937] worker_thread+0x1cc/0x238 [ 16.870949] kthread+0xec/0xfc [ 16.870972] ret_from_fork+0x10/0x20 [ 16.870996] ---[ end trace 0000000000000000 ]--- [ 19.678167] qcom-wcnss-pil a204000.remoteproc: start timed out [ 19.716132] remoteproc remoteproc0: can't start rproc a204000.remoteproc: -110 [ 33.759282] systemd[325]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 35.780439] systemd-journald[219]: File /var/log/journal/bfc00bbc02ac4aafa3ab9a15e9742f28/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 153.718131] usb 1-1.2: new high-speed USB device number 4 using ci_hdrc [ 153.927672] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00 [ 153.927697] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 153.927710] usb 1-1.2: Product: Ultra USB 3.0 [ 153.927722] usb 1-1.2: Manufacturer: SanDisk [ 153.927732] usb 1-1.2: SerialNumber: 0501127bab17b6d82fb09ac02f6fb533d654c023e3e6c7cc2d945c6bf872f733aff2000000000000000000009cef830100990510915581078f2717e9 [ 153.978012] SCSI subsystem initialized [ 153.989350] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 153.996827] scsi host0: usb-storage 1-1.2:1.0 [ 153.998496] usbcore: registered new interface driver usb-storage [ 155.015101] scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [ 155.307801] sd 0:0:0:0: [sda] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 155.315311] sd 0:0:0:0: [sda] Write Protect is off [ 155.315942] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 155.323232] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 155.385768] sda: sda1 [ 155.400794] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 185.888966] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.